The following table shows the workflow when working with a LUT that has already been created, whether it is a 1D or 3D LUT.
Depending on whether you are using 1D or 3D LUTs, whether you are processing your clips with the LUTs or just using them for viewing purposes, you perform one or more of the following steps.
| Step: | Refer to: |
|---|---|
| 1. Import a 1D or 3D LUT created in an outside application. | Configuring Backdraft Conform to Use LUTs |
| 2. In Backdraft Conform, you can apply a 3D LUT to the Player or to a viewport, for viewing purposes. | One of the following: |
| 3. Process clips with 1D or 3D LUTs on import or export. | Applying a LUT on Import or Export |
| 4. Process clips with 1D or 3D LUTs from the LUT Editor accessed from the EditDesk. | One of the following: |
