Customizing the View Previous Next Selective Backlighting of Active and Available Buttons

Appendix A, The Autodesk Control Surface
Customizing the Panel Sensitivity



When you enable the Edit function, you can modify the sensitivity of any modifier (e.g., knobs, wheels, and rings). These items include the Grading, Curves, Key, Geom, P&S, and Misc menu.

To edit the sensitivity of the Autodesk Control Surface panels:
  1. On the Navigation panel, press the top MORE button.

  2. Press the CURVES button to enter the Panel menu.

    In the Panel menu you can Edit (F4 button), Save (IN button), and Revert (OUT button) your panel sensitivity changes.

  3. Press the F4 button to enable the Edit mode.

  4. Touch any modifier you want to change its sensitivity on the panel. Turn the modifier clockwise to increase the sensitivity or counter-clockwise to decrease the sensitivity.

    Note: The Function panel displays the Grade menu by default. To change the sensitivity of the Curves, Geometry, Keyer, or Reposition menu, you must enable the menu you want to modify first before entering the panel sensitivity option.

    When a control is selected, its name and sensitivity are displayed on all the LCD panels. The last line of the LCD displays the control you are modifying, its value, and the enabled Edit mode.

    Note: Some control names are long and therefore are truncated on the Navigation panel LCD. The Function and Grading panels display the full name and value.

  5. Press the F4 button again to disable the Edit mode. You can now test out the new sensitivity value.

    Note: Pressing F4 does not exit you from the Panel menu.

    Note: You need to save the rules file in order to commit your modification. If you do not save the modification, you will lose the modified value(s) when you quit Lustre.

Saving the Sensitivity Modifications Top

When you have completed making modifications to the sensitivity of your Autodesk Control Surface panel and tested the sensitivity, you must save your changes.

To save the modifications to your Autodesk Control Surface panel:
  1. Press the IN button. The Save option is selected and the LCD displays "Confirm Save".

    Note: If you do not want to confirm the save, press the F1 button to exit the Save menu. The display returns to the Panel menu.

  2. Press the IN button again. The LCD displays "Saving Panel File".

    The changes are saved and the display returns to the top level menu.

Reverting the Panel Modifications Top

If you have made modifications to the panel control values and have not saved the changes, you can revert back to the previous saved values.

To revert the saved panel modifications:
  1. Press the OUT button to select the Revert option.

    The LCD displays "Confirm Revert".

    Note: If you do not want to confirm the revert, press the F1 button to cancel the revert. The display returns to the Panel menu.

  2. Press the OUT button again to confirm the revert. The LCD displays "Reverting Panel File" and then returns to the top level menu.

Previous Next