pymel.core.modeling.polyExtrudeFacet

polyExtrudeFacet(*args, **kwargs)

Extrude faces. Faces can be extruded separately or together, and manipulations can be performed either in world or object space.

Flags:

Long name (short name)		Argument Types	Properties
attraction (att)		float
	This flag specifies the attraction, related to magnet. C: Default is 0.0. The range is [-2.0, 2.0]. Q: When queried, this flag returns a float.
caching (cch)		bool
	Toggle caching for all attributes so that no recomputation is needed
constructionHistory (ch)		bool
	Turn the construction history on or off (where applicable). If construction history is on then the corresponding node will be inserted into the history chain for the mesh. If construction history is off then the operation will be performed directly on the object. Note:If the object already has construction history then this flag is ignored and the node will always be inserted into the history chain.
divisions (d)		int
	This flag specifies the number of subdivisions. C: Default is 1 Q: When queried, this flag returns an int.
gain (ga)		float
gravity (g)		float, float, float
	This flag specifies the gravity vector. C: Default is 0.0 -1.0 0.0. Q: When queried, this flag returns a float[3].
gravityX (gx)		float
	This flag specifies X for the gravity vector. C: Default is 0.0. Q: When queried, this flag returns a float.
gravityY (gy)		float
	This flag specifies Y for the gravity vector. C: Default is -1.0. Q: When queried, this flag returns a float.
gravityZ (gz)		float
	This flag specifies Z for the gravity vector. C: Default is 0.0. Q: When queried, this flag returns a float.
inputCurve (inc)		PyNode
	This flag specifies the name of the curve to be used as input for extrusion C: The selected faces will be extruded along the curve. It will be useful to set a higher value (greater than 4) for the ‘-d/-divisions’ flag, to get good results. The normal of the surface has to be aligned with the direction of the curve. The extrusion is evenly distributed in the curve’s parameter space, and not on the curve’s geometry space
keepFacesTogether (kft)		bool
	This flag specifies how to extrude faces. If on, faces are pulled together (connected ones stay connected and only outside edges form new faces), otherwise they are pulled independently (each edge on selected faces creates a new face and manipulations are performed on each selected face separately). C: Default is on. Q: When queried, this flag returns an int.
keepFacetTogether (xft)		bool
localCenter (lc)		int
localDirection (ld)		float, float, float
	This flag specifies the local slant axis (see local rotation). C: Default is 0.0 0.0 1.0. Q: When queried, this flag returns a float[3].
localDirectionX (ldx)		float
	This flag specifies X for the local slant axis. C: Default is 0.0. Q: When queried, this flag returns a float.
localDirectionY (ldy)		float
	This flag specifies Y for the local slant axis. C: Default is 0.0. Q: When queried, this flag returns a float.
localDirectionZ (ldz)		float
	This flag specifies Z for the local slant axis. C: Default is 1.0. Q: When queried, this flag returns a float.
localRotate (lr)		float, float, float
	This flag specifies the local rotations : (slantRot, slantRoll, twistRot). C: Default is 0.0 0.0 0.0. Q: When queried, this flag returns a float[3]. Local rotation (slantRot, slantRoll, twistRot).
localRotateX (lrx)		float
	This flag specifies local rotation X angle (Slant Rot around slantAxis). C: Default is 0.0. The range is [0, 360]. Q: When queried, this flag returns a float.
localRotateY (lry)		float
	This flag specifies local rotation Y angle (Slant Roll of slantAxis). C: Default is 0.0. The range is [0, 180]. Q: When queried, this flag returns a float.
localRotateZ (lrz)		float
	This flag specifies local rotation Z angle (Twist around normal). C: Default is 0.0. The range is [0, 360]. Q: When queried, this flag returns a float.
localScale (ls)		float, float, float
	This flag specifies the local scaling vector. C: Default is 1.0 1.0 1.0. Q: When queried, this flag returns a float[3].
localScaleX (lsx)		float
	This flag specifies X for local scaling vector. C: Default is 1.0. Q: When queried, this flag returns a float.
localScaleY (lsy)		float
	This flag specifies Y for local scaling vector. C: Default is 1.0. Q: When queried, this flag returns a float.
localScaleZ (lsz)		float
	This flag specifies Z for local scaling vector : Flattening. C: Default is 1.0. The range is [0.0, 1.0]. Q: When queried, this flag returns a float. Dynamic Values
localTranslate (lt)		float, float, float
	This flag specifies the local translation vector. C: Default is 0.0 0.0 0.0. Q: When queried, this flag returns a float[3].
localTranslateX (ltx)		float
	This flag specifies the X local translation vector. C: Default is 0.0. Q: When queried, this flag returns a float.
localTranslateY (lty)		float
	This flag specifies the Y local translation vector. C: Default is 0.0. Q: When queried, this flag returns a float.
localTranslateZ (ltz)		float
	This flag specifies the Z local translation vector. C: Default is 0.0. Q: When queried, this flag returns a float.
magnX (mx)		float
	This flag specifies X for the magnet vector. C: Default is 0.0. Q: When queried, this flag returns a float.
magnY (my)		float
	This flag specifies Y for the magnet vector. C: Default is 0.0. Q: When queried, this flag returns a float. Common flags
magnZ (mz)		float
magnet (m)		float, float, float
	This flag specifies the magnet vector. C: Default is 0.0 0.0 0.0. Q: When queried, this flag returns a float[3].
name (n)		unicode
	Give a name to the resulting node.
nodeState (nds)		int
	Defines how to evaluate the node. 0: Normal1: PassThrough2: Blocking3: Internally disabled. Will return to Normal state when enabled4: Internally disabled. Will return to PassThrough state when enabled5: Internally disabled. Will return to Blocking state when enabledFlag can have multiple arguments, passed either as a tuple or a list.
offset (off)		float
	This flag specifies the local offset. Each edge of each selected face moves towards the inside of the face by given distance (in local reference). C: Default is 0.0.
pivot (pvt)		float, float, float
	This flag specifies the pivot for scaling and rotation. C: Default is 0.0 0.0 0.0. Q: When queried, this flag returns a float[3].
pivotX (pvx)		float
	This flag specifies the X pivot for scaling and rotation. C: Default is 0.0. Q: When queried, this flag returns a float.
pivotY (pvy)		float
	This flag specifies the Y pivot for scaling and rotation. C: Default is 0.0. Q: When queried, this flag returns a float.
pivotZ (pvz)		float
	This flag specifies the Z pivot for scaling and rotation. C: Default is 0.0. Q: When queried, this flag returns a float. Local Values
random (ran)		float
	This flag specifies the random value for all parameters. C: Default is 0.0. The range is [-10.0, 10.0]. Q: When queried, this flag returns a float.
rotate (ro)		float, float, float
	This flag specifies the rotation angles around X, Y, Z. C: Default is 0.0 0.0 0.0. Q: When queried, this flag returns a float[3].
rotateX (rx)		float
	This flag specifies the rotation angle around X. C: Default is 0.0. Q: When queried, this flag returns a float.
rotateY (ry)		float
	This flag specifies the rotation angle around Y. C: Default is 0.0. Q: When queried, this flag returns a float.
rotateZ (rz)		float
	This flag specifies the rotation angle around Z. C: Default is 0.0. Q: When queried, this flag returns a float.
scale (s)		float, float, float
	This flag specifies the scaling vector. C: Default is 1.0 1.0 1.0. Q: When queried, this flag returns a float[3].
scaleX (sx)		float
	This flag specifies X for scaling vector. C: Default is 1.0. Q: When queried, this flag returns a float.
scaleY (sy)		float
	This flag specifies Y for scaling vector. C: Default is 1.0. Q: When queried, this flag returns a float.
scaleZ (sz)		float
	This flag specifies Z for scaling vector. C: Default is 1.0. Q: When queried, this flag returns a float.
smoothingAngle (sma)		float
	This flag specifies smoothingAngle threshold used to determine whether newly created edges are hard or soft. C: Default is 30.0. The range is [0, 180]. Q: When queried, this flag returns a float. Global Values
taper (tp)		float
taperCurve_FloatValue (cfv)		float
taperCurve_Interp (ci)		int
taperCurve_Position (cp)		float
translate (t)		float, float, float
	This flag specifies the translation vector. C: Default is 0.0 0.0 0.0. Q: When queried, this flag returns a float[3].
translateX (tx)		float
	This flag specifies the X translation vector. C: Default is 0.0. Q: When queried, this flag returns a float.
translateY (ty)		float
	This flag specifies the Y translation vector. C: Default is 0.0. Q: When queried, this flag returns a float.
translateZ (tz)		float
	This flag specifies the Z translation vector. C: Default is 0.0. Q: When queried, this flag returns a float.
twist (twt)		float
weight (w)		float
	This flag specifies the weight, related to gravity. C: Default is 0.0. Q: When queried, this flag returns a float.
worldSpace (ws)		bool
	This flag specifies which reference to use. If on: all geometrical values are taken in world reference. If off: all geometrical values are taken in object reference. C: Default is off. Q: When queried, this flag returns an int.

Derived from mel command maya.cmds.polyExtrudeFacet

Example:

import pymel.core as pm

# Separate
pm.polyPlane( n='plg', w=10, h=10 )
pm.polyExtrudeFacet( 'plg.f[71:72]', 'plg.f[81:82]', kft=False, ltz=2, ls=(.5, .5, 0) )
# Facets are extruded then scaled separately


# Together
pm.polyExtrudeFacet( 'plg.f[17:18]', 'plg.f[27:28]', kft=True, ltz=2, ls=(.5, .5, 0) )
# Facets are extruded then scaled together