pymel.core.context.artSelectCtx

artSelectCtx(*args, **kwargs)

This command is used to select/deselect/toggle components on selected surfaces using a brush interface (Maya Artisan). Since, it selects components of the surface, it only works in the component mode. In query mode, return type is based on queried flag.

Flags:

Long name (short name)		Argument Types	Properties
accopacity (aco)		bool
	Sets opacity accumulation on/off. C: Default is false (Except for sculpt tool for which it is true by default). Q: When queried, it returns a boolean.
addselection (ads)		bool
	If true, each new stroke adds cvs to the active list. If false, each stroke replaces the previous selection. C: Default is true. Q: When queried, it returns a boole
afterStrokeCmd (asc)		unicode
	The passed string is executed as a MEL command immediately after the end of a stroke. C: Default is no command. Q: When queried, it returns the current command Flag can have multiple arguments, passed either as a tuple or a list.
beforeStrokeCmd (bsc)		unicode
	The passed string is executed as a MEL command immediately before the start of a stroke. C: Default is no command. Q: When queried, it returns the current command
brushalignment (bra)		bool
	Specifies the path brush alignemnt. If true, the brush will align to stroke path, otherwise it will align to up vector. C: Default is true. Q: When queried, it returns a boolean.
brushfeedback (brf)		bool
	Specifies if the brush additional feedback should be drawn. C: Default is TRUE. Q: When queried, it returns a boolean.
clear (clr)		bool
	Floods all cvs/vertices to the current value.
dragSlider (dsl)		unicode
	Sets the current brush drag state for resizing or offsetting the brush (like the ‘b’ and ‘m’ default hotkeys). The string argument is one of: radius, lowradius, opacity, value, depth, displacement, uvvectoror none. C: Default is none.
dynclonemode (dcm)		bool
exists (ex)		bool
	Returns true or false depending upon whether the specified object exists. Other flags are ignored.
expandfilename (eef)		bool
	If true, it will expand the name of the export file and concatenate it with the surface name. Otherwise it will take the name as it is. C: Default is true.
exportaspectratio (ear)		float
exportfilemode (efm)		unicode
	Specifies the export channel.The valid entries here are: alpha, luminance, rgb, rgba. C: Default is luminance/rgb. Q: When queried, it returns a string.
exportfilesave (esf)		unicode
	Exports the attribute map and saves to a specified file.
exportfilesizex (fsx)		int
	Specifies the width of the attribute map to export. C: Default width is 256. Q: When queried, it returns an integer.
exportfilesizey (fsy)		int
	Specifies the width of the attribute map to export. C: Default width is 256. Q: When queried, it returns an integer.
exportfiletype (eft)		unicode
	Specifies the image file format. It can be one of the following: iff, tiff, jpeg, alias, rgb, fitpostScriptEPS, softimage, wavefrontRLA, wavefrontEXP. C: default is tiff. Q: When queried, it returns a string.
history (ch)		bool
	If this is a tool command, turn the construction history on for the tool in question.
image1 (i1)		unicode
image2 (i2)		unicode
image3 (i3)		unicode
	Contexts support up to three icons that represent the tool associated with the context.
importfileload (ifl)		unicode
	Load the attribute map a specified file.
importfilemode (ifm)		unicode
	Specifies the channel to import. The valid entries here are: alpha, luminance, red, green, blue, and rgbC: Default is alpha. Q: When queried, it returns a string.
importreassign (irm)		bool
	Specifies if the multiply atrribute maps are to be reassigned while importing. Only maps previously exported from within Artisan can be reassigned. C: Default is FALSE. Q: When queried, it returns a boolean.
importthreshold (ift)		float
	Specifies the threshold for the import of the attribute maps. C: Default is 0.5. Q: When queried, it returns a float.
lastRecorderCmd (lrc)		unicode
lastStampName (lsn)		unicode
lowerradius (lr)		float
	Sets the lower size of the brush (only apply on tablet).
makeStroke (mst)		int
mappressure (mp)		unicode
	Sets the tablet pressure mapping when the table is used. There are four options: none- the pressure has no effect, opacity- the pressure is mapped to the opacity, radius- the is mapped to modify the radius of the brush, both- the pressure modifies both the opacity and the radius. C: Default is none. Q: When queried, it returns a string.
name (n)		unicode
	If this is a tool command, name the tool appropriately.
opacity (op)		float
	Sets the brush opacity. C: Default is 1.0. Q: When queried, it returns a float.
outline (o)		bool
	Specifies if the brush should be drawn. C: Default is TRUE. Q: When queried, it returns a boolean.
outwhilepaint (owp)		bool
	Specifies if the brush outline should be drawn while painting. C: Default is FALSE. Q: When queried, it returns a boolean.
paintmode (pm)		unicode
	Specifies the paint mode. There are two possibilities: screenand tangent. C: Default is screen. Q: When queried, it returns a string.
paintoperationtype (pot)		unicode
pickColor (pcm)		bool
pickValue (pv)		bool
playbackCursor (plc)		float, float
playbackPressure (plp)		float
preserveclonesource (pcs)		bool
profileShapeFile (psf)		unicode
	Passes a name of the image file for the stamp shape profile.
projective (prm)		bool
	Specifies the projective paint mode. C: Default is ‘false’. Q: When queried, it returns a boolean.
radius (r)		float
	Sets the size of the brush. C: Default is 1.0 cm. Q: When queried, it returns a float.
record (rec)		bool
reflection (rn)		bool
	Specifies the reflection mode. C: Default is ‘false’. Q: When queried, it returns a boolean.
reflectionaboutorigin (rno)		bool
reflectionaxis (ra)		unicode
	Specifies the reflection axis. There are three possibilities: x, yand z. C: Default is x. Q: When queried, it returns a string.
screenRadius (scR)		float
selectall (sal)		bool
	Selects all vertices/egdes/faces/uvs.
selectclonesource (scs)		bool
selectop (sop)		unicode
	Specifies the selection operation (select, unselect, toggle). C: Default is select. Q: When queried, it returns a string.
showactive (sa)		bool
	Sets on/off the display of the surface isoparms. C: Default is TRUE. Q: When queried, it returns a boolean.
stampDepth (stD)		float
stampProfile (stP)		unicode
	Sets the brush profile of the current stamp. Currently, the following profiles are supported: gaussian, soft, solidand square. C: Default is gaussian. Q: When queried, it returns a string.
stampSpacing (stS)		float
strokesmooth (ssm)		unicode
surfaceConformedBrushVertices (scv)		bool
	Enables/disables the the display of the effective brush area as affected vertices.
tablet (tab)		bool
	Returns true if the tablet device is present, false if it is absent
tangentOutline (to)		bool
	Enables/disables the display of the brush circle tangent to the surface.
toggleall (tal)		bool
	Toggle all vertices/egdes/faces/uvs.
unselectall (ual)		bool
	Unselects all vertices/egdes/faces/uvs.
usepressure (up)		bool
	Sets the tablet pressure on/off. C: Default is false. Q: When queried, it returns a boolean.
worldRadius (wlR)		float

Derived from mel command maya.cmds.artSelectCtx

Example:

import pymel.core as pm

# Create a new select context, then switch to it
pm.artSelectCtx('artSelectCtx1')
# Result: u'artSelectCtx1' #
pm.setToolTo('artSelectCtx1')

# Set brush's radius to 2.0, lower radius to 0.5
pm.artSelectCtx('artSelectCtx1', edit=True, r=2.0, lr=0.5)
# Result: u'artSelectCtx1' #