The Feet Stabilization property settings enable you to stabilize the feet of your model. This may be necessary in certain
situations, such as when you have data with noise that causes your model’s feet to jitter.
The Feet Stabilization property settings are described in the following table.
Feet Stabilization property settings
|
Description
|
|
Enables you to stabilize the feet of your model.
|
|
When set to Off, Lock Time is disabled. When set to User, you can manually specify the number of frames for the Lock Time.
By default, Auto mode is selected, and Lock Time calculates the number of frames automatically.
|
|
Sets the feet to stationary after a specified number of frames, where the feet have not moved outside the specified range
(Lock Radius and Lock Angle Limit).
|
|
When set to Off, Lock Radius is disabled. User mode lets you change the Lock Radius property manually. Auto mode is selected
by default, and automatically calculates the Lock Radius.
|
|
Sets the radius tolerance before foot stabilization is unlocked.
|
|
When set to Off, Lock Angle Limit is disabled. Selecting User mode lets you manually adjust the angle tolerance. Auto mode
calculates the angle tolerance for you, and is the default option.
|
|
Sets the angle tolerance before foot stabilization is unlocked.
|
|
When set to Off, this mode is disabled. Selecting User mode lets you manually adjust the proximity of the feet of the character
to the floor. Auto mode calculates the proximity for you, and is the default option.
|
|
Lets you adjust the proximity of the feet of the character to the floor.
|
|
When set to Off, the Loosen property is disabled. The User mode lets you manually adjust the Loosen property. By default,
Auto mode is selected, automatically setting the Loosen property.
|
|
Loosens the effect of stabilization, resulting in a less rigid effect.
|
|
When set to Off, the Recovery Time property is disabled. By default, Auto mode is selected, which automatically calculates
the Recovery Time. Select User mode to define a customized Recovery Time.
|
|
Sets the number of frames to move the foot to a new position after unlocking stabilization.
|
Except where otherwise noted, this work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 3.0 Unported License