Quick Gain

The Quick Gain controls are used to set the Gain in three specific ways:

NoteThe main Gain value is applied after the other Gain fields, so changes to main Gain do not change the separate channel Gain fields or the Quick Gain fields.

Modify:	To:
Temp	Set gain using a scale from warm (-100) to cool (100), which results in orange to cyan. It affects the Red and Blue Gain fields.
M/G	Set gain using a scale from green (-100) to magenta (100). It affects the Red, Green, and Blue Gain fields.
Value	Set gain using a scale from dark (0) to bright (200). It affects the Red, Green, and Blue Gain fields.

To modify the image using the Quick Gain controls:

Drag the field to set the gain. You may also type values into the field and press Enter.
NoteYou can reset all fields simultaneously by clicking Reset in the Tool Options area located on the right side of the UI.