Show in Contents

Add to Favorites

Home: Lustre

 

Working with Control Surfaces

Basics

Bypassing Menu Parameters

 

Basics > 

Resetting Parameters

You can reset parameters on a shot-by-shot basis. You can either reset a parameter, reset all parameters in a menu, or reset a shot to its original state.

You can also reset parameters with the Autodesk control surface or with the Tangent CP100 control surface. See the section that addresses resetting parameters in The Autodesk Control Surface, or in The Tangent CP100 Control Surface.

To reset a parameter:

1. After making a change to a parameter, hold down the Ctrl key and then click the parameter (field, graph, or option).

   The parameter is reset.

To reset all parameters for a menu:

1. Select the shot you want to reset.
2. Access the menu you want to reset.
3. Click Reset (or press R), and then confirm.

   
   

   The menu is reset.

To reset a single shot to its original state:

1. Select the shot that you want to reset.
2. Press the R key twice.
   TipYou can also double-click an unused storage container in the Grade bin to remove any grade or repositioning from the selected shot.

   The shot is reset to its original state.

To reset multiple shots to their original state:

1. Right-click to select the shots you want to reset.
2. Double-click an empty grade in the Grade bin.

   The selected shots are reset to their original state.