Calibrating a Monitor Previous Next Applying Print LUTs for Viewing

Chapter 5, Monitor Calibration
Calibrating for Dual-Head Mode

If the video card on the Lustre system is set to Dual-Head mode, you can set different LUTs for each monitor. This is useful when using different display types, such as a monitor and a plasma screen.

To set different LUTs:

  1. In the Calibrate menu, click 1 for the main monitor, enable HW, and select a hardware 3D Mesh for the main LUT.

    Note: A hardware LUT is processed directly on the video card and therefore ensures better performance in Lustre. Only 3D Meshes are available for hardware LUTS.

    Show full-size image

  2. Click 2 and select any LUT for the second monitor.

    Note: This setup will not affect playback speed unless a 3D Mesh is also chosen for the second monitor. In this case, the playback rate will be approximately 18 fps.

Previous Next