MFnMesh Class Reference
[OpenMaya - API module for common classes, FunctionSet classes]

#include
<MFnMesh.h>

Inheritance diagram for MFnMesh:

[legend]

Collaboration diagram for MFnMesh:

[legend]

List of all members.

Detailed Description

Polygonal surface function set.

Note on Terminology: The following terms are used interchangeably:

mesh and object,
polygon and face,
object-relative indices and global/mesh-relative indices,
face-relative indices and local indices

object-relative indices - they range between 0..(numVertices()-1)

face-relative indices - they range between 0..(polygonVertexCount(faceId)-1)

This function set provides access to polygonal meshes. Objects of type MFn::kMesh, MFn::kMeshData, and MFn::kMeshGeom are supported. MFn::kMesh objects are shapes in the DAG, MFn::kMeshGeom objects are the raw geometry that the shapes use, and MFn::kMeshData objects are the data that is passed through dependency graph connections.

NOTE: If the function set has been initialized with a MFn::kMesh object then it must have geometry attached.

Mesh Construction Meshes are created by specifying a vertex list, a list of vertex counts per-polygon, and a list of vertices that make up the polygons. Edge data is also maintained for the mesh and can be returned to the caller. The following lists are used by the create method to construct a mesh:

vertex list All of the vertices for the mesh are stored in a master vertex list which is an array indexed from 0 to numVertices()-1. Vertices in this list can be shared among polygons.

polygon count list This is a list containing the number of vertices for each polygon. Each polygon in the mesh would have an entry in this list containing its number of vertices.

vertex connection list This is a list of the vertex id's for each polygon. Since polygons can have different numbers of vertices, the polygon count list is used to determine which polygons are represented by the various sections of this list.

There are several cases in which the create method will alter the data passed in:

If the data for the mesh is provided in such a way that the verticies for some polygons are specified in a clockwise direction, and others in a counter-clockwise direction, the edges between neighboring polygons with reversed orderings will be duplicated. In this context, "duplicating an edge" means that copies will be made of the edge's vertices and the index list for the adjoining polygons will be redefined to

use the appropriate vertices.

If the vertex connection list for a polygon specifies an edge with the same start and end verticies, those edges will be removed. (ie. a polygon specified as 1 2 2 3 4 will be transformed into 1 2 3 4).

If the same vertex appears in the vertex connection list for a polygon more than once, another vertex will be created at the same location, and the list will be altered to use the copy. (ie. a polygon specified as 1 2 3 1 4 will be transformed into 1 2 3 5 4, where 5 is in the same location as 1).

Texture Coordinates (UV's) You can optionally specify texture (uv) coordinates. UV coordinates are 2-d coordinates used for mapping textures to the polygons of a mesh. All of the uv coordinates are stored in one or more named UV sets. The default mesh uv list stores uv coordinates in an array indexed from 0 to numUVs()-1. UV's are referenced on a per-polygon per-vertex basis, so for a polygon with 4 vertices there would be 4 uv's. The uv values for a polygon are set by specifying the index of the uv for each vertex of the polygon. This index is the uv's position in the master uv array. UV's are optional so polygons do not have to have uv values associated with them. There may be only 1 or 2 polygons in a mesh that have uv coordinates set, or all of the polygons may have uv's. UV's can also be shared so several different polygons may reference the same uv's. If you are creating a UV for the first time or changing the order of the UV then you need to set the UV using one of the setUV methods and then assign new indices using one of the assignUV methods. It is not necessary to call assignUV if editing the position of an existing UV.

Color per vertex You can optionally specify color per vertex information using this class. It is possible to create and manipulate color per vertex information using the methods available. Many of the color per vertex methods have a default parameter: colorSet. If unspecified, the method will operate on the current color set.

Normals Some of the Normals in Maya are now user-settable. If the vertex normals are not set or locked, they are computed by maya when the mesh changes. If set or locked, the normals remain frozen relative to the object, unless the user unlocks them. There are 3 types of normals for a mesh:

Per-vertex per-polygon Polygonal objects store a list of per-vertex per-polygon normals (similar to the vertex list) This list is what is returned by MFnMesh::getNormals and MItMeshPolygon::getNormal(index, normal). As well, MItMeshPolygon::normalIndex( vertexIndex ) returns the index into the normal list for a particular vertex of the polygon.

For a cube, the list would contain 24 normals (4 vertices * 6 polygons) since the edges for a cube are hard and the per-vertex per-polygon normals cannot be shared. For a sphere or torus, which has smooth edges, the normals can be shared, and thus the normal list contains the same number of normals as vertices.

Per-polygon normals Polygonal objects store a normal for each polygon. These normals can be accessed via MItMeshPolygon::getNormal(normal) or MFnMesh::getPolygonNormal. So, a cube, which is comprised of 6 polygons would contain 6 such normals.

Per-vertex You can also access a normal for each vertex of the mesh, independent of any polygons. Such normals are not stored in the object, but instead are calculated by Maya upon request as the average of all the per-polygon normals for the polygons adjacent to the vertex. These normals are what is returned by MFnMesh::getVertexNormal or MItMeshVertex::getNormal.

Blind Data MFnMesh allows you to create Blind Data types, and to create and access mesh component level blind data, but not object level blind data. Object level data may be assigned through the polyBlindData command or the Blind Data Editor. However, object level blind data is just an ordinary compound dynamic attribute directly on the object. The parent attribute name is BlindDataNNNN where NNNN is the blind data typeID. e.g. if your typeId is 1001 your object will have a compound dynamic attr called BlindData1001.

Handling Components There are also three iterator classes which provide more specific control over the vertices, edges, and polygons of a mesh and are useful when dealing with components. See MItMeshPolygon, MItMeshEdge, and MItMeshVertex.

Examples:


Public Types
enum	MColorRepresentation { kAlpha = 1, kRGB = 3, kRGBA = 4 }
	Specifies which color components are used by a colorSet. More...
enum	SplitPlacement { kOnEdge, kInternalPoint, kInvalid }
	Specifies how a point along split is to be determined. More...
enum	BoolOperation { kIntersection = 1, kDifference, kUnion }
	Boolean operators. More...
Public Member Functions
virtual MFn::Type	type () const
	Function set type.
virtual	~MFnMesh ()
	Destructor.
	MFnMesh ()
	Default constructor.
	MFnMesh (MObject &object, MStatus *ReturnStatus=NULL)
	Constructor.
	MFnMesh (const MDagPath &object, MStatus *ret=NULL)
	Constructor.
MObject	create (int numVertices, int numPolygons, const MFloatPointArray &vertexArray, const MIntArray &polygonCounts, const MIntArray &polygonConnects, MObject parentOrOwner=MObject::kNullObj, MStatus *ReturnStatus=NULL)
MObject	create (int numVertices, int numPolygons, const MPointArray &vertexArray, const MIntArray &polygonCounts, const MIntArray &polygonConnects, MObject parentOrOwner=MObject::kNullObj, MStatus *ReturnStatus=NULL)
MObject	create (int numVertices, int numPolygons, const MFloatPointArray &vertexArray, const MIntArray &polygonCounts, const MIntArray &polygonConnects, const MFloatArray &uArray, const MFloatArray &vArray, MObject parentOrOwner=MObject::kNullObj, MStatus *ReturnStatus=NULL)
MObject	create (int numVertices, int numPolygons, const MPointArray &vertexArray, const MIntArray &polygonCounts, const MIntArray &polygonConnects, const MFloatArray &uArray, const MFloatArray &vArray, MObject parentOrOwner=MObject::kNullObj, MStatus *ReturnStatus=NULL)
MObject	generateSmoothMesh (MObject parentOrOwner=MObject::kNullObj, MMeshSmoothOptions options=NULL, MStatus ReturnStatus=NULL)
MStatus	getSmoothMeshDisplayOptions (MMeshSmoothOptions &options) const
MStatus	setSmoothMeshDisplayOptions (const MMeshSmoothOptions &options)
MObject	addPolygon (const MPointArray &vertexArray, bool mergeVertices=true, double pointTolerance=1.0e-10, MObject parentOrOwner=MObject::kNullObj, MStatus *ReturnStatus=NULL)
MObject	addPolygon (const MPointArray &vertexArray, int &faceIndex, bool mergeVertices=true, double pointTolerance=1.0e-10, MObject parentOrOwner=MObject::kNullObj, MStatus *ReturnStatus=NULL)
MStatus	deleteFace (int index, MDGModifier *modifier=NULL)
MStatus	deleteEdge (int index, MDGModifier *modifier=NULL)
MStatus	deleteVertex (int index, MDGModifier *modifier=NULL)
MStatus	split (MIntArray &placements, MIntArray &edgeList, MFloatArray &edgeFactors, MFloatPointArray &internalPoints)
MStatus	subdivideFaces (MIntArray &faceList, int divisionCount)
MStatus	subdivideEdges (MIntArray &edgeList, int divisionCount)
MStatus	extrudeFaces (MIntArray &faceList, int extrusionCount, MFloatVector *translation, bool extrudeTogether)
MStatus	extrudeEdges (MIntArray &edgeList, int extrusionCount, MFloatVector *translation, bool extrudeTogether)
MStatus	duplicateFaces (MIntArray &faceList, MFloatVector *translation)
MStatus	extractFaces (MIntArray &faceList, MFloatVector *translation)
MStatus	collapseFaces (MIntArray &faceList)
MStatus	collapseEdges (MIntArray &edgeList)
int	numVertices (MStatus *ReturnStatus=NULL) const
int	numEdges (MStatus *ReturnStatus=NULL) const
int	numPolygons (MStatus *ReturnStatus=NULL) const
int	numFaceVertices (MStatus *ReturnStatus=NULL) const
int	polygonVertexCount (int polygonId, MStatus *ReturnStatus=NULL) const
int	numUVs (MStatus *ReturnStatus=NULL) const
int	numUVs (const MString &uvSet, MStatus *ReturnStatus=NULL) const
int	numColors (MStatus *ReturnStatus=NULL) const
int	numColors (const MString &colorSet, MStatus *ReturnStatus=NULL) const
int	numNormals (MStatus *ReturnStatus=NULL) const
bool	hasColorChannels (const MString &colorSet, MStatus *ReturnStatus=NULL) const
bool	hasAlphaChannels (const MString &colorSet, MStatus *ReturnStatus=NULL) const
MColorRepresentation	getColorRepresentation (const MString &colorSet, MStatus *ReturnStatus=NULL) const
bool	isColorClamped (const MString &colorSet, MStatus *ReturnStatus=NULL) const
MStatus	setIsColorClamped (const MString &colorSet, bool clamped)
MStatus	getTriangles (MIntArray &triangleCounts, MIntArray &triangleVertices) const
MStatus	booleanOp (BoolOperation op, MFnMesh &mesh1, MFnMesh &mesh2)
bool	closestIntersection (const MFloatPoint &raySource, const MFloatVector &rayDirection, const MIntArray faceIds, const MIntArray triIds, bool idsSorted, MSpace::Space space, float maxParam, bool testBothDirections, MMeshIsectAccelParams accelerator, MFloatPoint &hitPoint, float hitRayParam, int hitFace, int hitTriangle, float hitBary1, float hitBary2, float tolerance=1e-6, MStatus *ReturnStatus=NULL)
bool	anyIntersection (const MFloatPoint &raySource, const MFloatVector &rayDirection, const MIntArray faceIds, const MIntArray triIds, bool idsSorted, MSpace::Space space, float maxParam, bool testBothDirections, MMeshIsectAccelParams accelerator, MFloatPoint &hitPoint, float hitRayParam, int hitFace, int hitTriangle, float hitBary1, float hitBary2, float tolerance=1e-6, MStatus *ReturnStatus=NULL)
bool	allIntersections (const MFloatPoint &raySource, const MFloatVector &rayDirection, const MIntArray faceIds, const MIntArray triIds, bool idsSorted, MSpace::Space space, float maxParam, bool testBothDirections, MMeshIsectAccelParams accelerator, bool sortHits, MFloatPointArray &hitPoints, MFloatArray hitRayParams, MIntArray hitFaces, MIntArray hitTriangles, MFloatArray hitBary1, MFloatArray hitBary2, float tolerance=1e-6, MStatus *ReturnStatus=NULL)
MStatus	sortIntersectionFaceTriIds (MIntArray faceIds, MIntArray triIds)
MStatus	freeCachedIntersectionAccelerator ()
MString	cachedIntersectionAcceleratorInfo (MStatus *ReturnStatus=NULL)
bool	intersect (const MPoint &raySource, const MVector &rayDirection, MPointArray &points, double tolerance=1.0e-10, MSpace::Space space=MSpace::kObject, MIntArray polygonIds=NULL, MStatus ReturnStatus=NULL) const
MStatus	getClosestPointAndNormal (const MPoint &toThisPoint, MPoint &theClosestPoint, MVector &theNormal, MSpace::Space space=MSpace::kObject, int *closestPolygon=NULL) const
MStatus	getClosestPoint (const MPoint &toThisPoint, MPoint &theClosestPoint, MSpace::Space space=MSpace::kObject, int *closestPolygon=NULL) const
MStatus	getClosestNormal (const MPoint &toThisPoint, MVector &theNormal, MSpace::Space space=MSpace::kObject, int *closestPolygon=NULL) const
MStatus	getConnectedShaders (unsigned int instanceNumber, MObjectArray &shaders, MIntArray &indices) const
MStatus	getConnectedSetsAndMembers (unsigned int instanceNumber, MObjectArray &sets, MObjectArray &comps, bool renderableSetsOnly) const
MObject	copy (const MObject &source, MObject parentOrOwner=MObject::kNullObj, MStatus *ReturnStatus=NULL)
MStatus	updateSurface ()
MStatus	syncObject ()
const float *	getRawPoints (MStatus *) const
const float *	getRawNormals (MStatus *) const
MStatus	getPoints (MFloatPointArray &vertexArray, MSpace::Space space=MSpace::kObject) const
MStatus	getPoints (MPointArray &vertexArray, MSpace::Space space=MSpace::kObject) const
MStatus	setPoints (MFloatPointArray &vertexArray, MSpace::Space space=MSpace::kObject)
MStatus	setPoints (MPointArray &vertexArray, MSpace::Space space=MSpace::kObject)
MStatus	getVertices (MIntArray &vertexCount, MIntArray &vertexList) const
MStatus	getPolygonVertices (int polygonId, MIntArray &vertexList) const
MStatus	getPolygonTriangleVertices (int polygonId, int triangleId, int triangleVertices[3]) const
MStatus	setPoint (int vertexId, const MPoint &pos, MSpace::Space space=MSpace::kObject)
MStatus	getPoint (int vertexId, MPoint &pos, MSpace::Space space=MSpace::kObject) const
MStatus	getNormals (MFloatVectorArray &normals, MSpace::Space space=MSpace::kObject) const
MStatus	setNormals (MFloatVectorArray &normals, MSpace::Space space=MSpace::kObject)
MStatus	getFaceVertexNormal (int faceIndex, int vertexIndex, MVector &normal, MSpace::Space space=MSpace::kObject) const
MStatus	getFaceVertexNormals (int faceIndex, MFloatVectorArray &normals, MSpace::Space space=MSpace::kObject) const
MStatus	getNormalIds (MIntArray &normalIdCounts, MIntArray &normalIds) const
MStatus	getFaceNormalIds (int faceIndex, MIntArray &normals) const
MStatus	setFaceVertexNormal (MVector &normal, int faceIndex, int vertexIndex, MSpace::Space space=MSpace::kObject, MDGModifier *modifier=NULL)
MStatus	setVertexNormal (MVector &normal, int vertexIndex, MSpace::Space space=MSpace::kObject, MDGModifier *modifier=NULL)
MStatus	setFaceVertexNormals (MVectorArray &normalArray, MIntArray &faceList, MIntArray &vertexList, MSpace::Space space=MSpace::kObject)
MStatus	setVertexNormals (MVectorArray &normalArray, MIntArray &vertexList, MSpace::Space space=MSpace::kObject)
MStatus	getVertexNormal (int vertexId, MVector &normal, MSpace::Space space=MSpace::kObject) const
	This method is obsolete.
MStatus	getVertexNormal (int vertexId, bool angleWeighted, MVector &normal, MSpace::Space space=MSpace::kObject) const
MStatus	getVertexNormals (bool angleWeighted, MFloatVectorArray &normals, MSpace::Space space=MSpace::kObject) const
MStatus	getPolygonNormal (int polygonId, MVector &normal, MSpace::Space space=MSpace::kObject) const
bool	isNormalLocked (int normalId, MStatus *ReturnStatus=NULL) const
MStatus	lockVertexNormals (MIntArray &vertexList)
MStatus	lockFaceVertexNormals (MIntArray &faceList, MIntArray &vertexList)
MStatus	unlockVertexNormals (MIntArray &vertexList)
MStatus	unlockFaceVertexNormals (MIntArray &faceList, MIntArray &vertexList)
int	getTangentId (int faceIndex, int vertexIndex, MStatus *ReturnStatus=NULL) const
MStatus	getTangents (MFloatVectorArray &normals, MSpace::Space space=MSpace::kObject, const MString *uvSet=NULL) const
MStatus	getFaceVertexTangent (int faceIndex, int vertexIndex, MVector &tangent, MSpace::Space space=MSpace::kObject, const MString *uvSet=NULL) const
MStatus	getFaceVertexTangents (int faceIndex, MFloatVectorArray &tangents, MSpace::Space space=MSpace::kObject, const MString *uvSet=NULL) const
MStatus	getBinormals (MFloatVectorArray &normals, MSpace::Space space=MSpace::kObject, const MString *uvSet=NULL) const
MStatus	getFaceVertexBinormal (int faceIndex, int vertexIndex, MVector &normal, MSpace::Space space=MSpace::kObject, const MString *uvSet=NULL) const
MStatus	getFaceVertexBinormals (int faceIndex, MFloatVectorArray &normals, MSpace::Space space=MSpace::kObject, const MString *uvSet=NULL) const
bool	isPolygonConvex (int faceIndex, MStatus *ReturnStatus=NULL) const
MStatus	getEdgeVertices (int edgeId, int2 &vertexList) const
bool	isEdgeSmooth (int edgeId, MStatus *ReturnStatus=NULL) const
MStatus	setEdgeSmoothing (int edgeId, bool smooth=true)
MStatus	cleanupEdgeSmoothing ()
MStatus	getCreaseEdges (MUintArray &edgeIds, MDoubleArray &creaseData) const
MStatus	setCreaseEdges (const MUintArray &edgeIds, const MDoubleArray &creaseData)
MUintArray	getInvisibleFaces (MStatus *ReturnStatus=NULL) const
MStatus	setInvisibleFaces (const MUintArray &faceIds, bool makeVisible=false)
MStatus	getCreaseVertices (MUintArray &vertexIds, MDoubleArray &creaseData) const
MStatus	setCreaseVertices (const MUintArray &vertexIds, const MDoubleArray &creaseData)
int	numUVSets (MStatus *ReturnStatus=NULL) const
MString	createUVSetWithName (const MString &uvSetName, MDGModifier modifier=NULL, MStatus ReturnStatus=NULL, const MUintArray *instances=NULL)
MString	copyUVSetWithName (const MString &fromName, const MString &toName, MDGModifier modifier=NULL, MStatus ReturnStatus=NULL)
MStatus	renameUVSet (const MString &origName, const MString &newName, MDGModifier *modifier=NULL)
MStatus	deleteUVSet (const MString &setName, MDGModifier modifier=NULL, MSelectionList currentSelection=NULL)
MStatus	setCurrentUVSetName (const MString &setName, MDGModifier modifier=NULL, MSelectionList currentSelection=NULL)
MString	currentUVSetName (MStatus *ReturnStatus=NULL, int instance=-1) const
MStatus	getUVSetNames (MStringArray &setNames) const
MStatus	getUVSetFamilyNames (MStringArray &familyNames) const
MStatus	getUVSetsInFamily (const MString &familyName, MStringArray &setNames) const
bool	isUVSetPerInstance (const MString &name, MStatus *ReturnStatus=NULL) const
MStatus	getFaceUVSetNames (int polygonId, MStringArray &setNames) const
MStatus	getAssociatedUVSetTextures (const MString uvSetName, MObjectArray &textures) const
MStatus	getAssociatedUVSetInstances (const MString &uvSetName, MIntArray &instances) const
MStatus	setUVs (const MFloatArray &uArray, const MFloatArray &vArray, const MString *uvSet=NULL)
MStatus	setSomeUVs (const MIntArray &uvIds, const MFloatArray &uArray, const MFloatArray &vArray, const MString *uvSet=NULL)
MStatus	getUVs (MFloatArray &uArray, MFloatArray &vArray, const MString *uvSet=NULL) const
MStatus	setUV (int uvId, float u, float v, const MString *uvSet=NULL)
MStatus	getUV (int uvId, float &u, float &v, const MString *uvSet=NULL) const
MStatus	getPointAtUV (int polygonId, MPoint &theClosestPoint, float2 &uvPoint, MSpace::Space space=MSpace::kObject, const MString *uvSet=NULL, float tolerance=0.0)
MStatus	getUVAtPoint (MPoint &pt, float2 &uvPoint, MSpace::Space space=MSpace::kObject, const MString uvSet=NULL, int closestPolygon=NULL)
MStatus	getPolygonUV (int polygonId, int vertexIndex, float &u, float &v, const MString *uvSet=NULL) const
MStatus	getPolygonUVid (int polygonId, int vertexIndex, int &uvId, const MString *uvSet=NULL) const
MStatus	assignUV (int polygonId, int vertexIndex, int uvId, const MString *uvSet=NULL)
MStatus	assignUVs (const MIntArray &uvCounts, const MIntArray &uvIds, const MString *uvSet=NULL)
MStatus	clearUVs (const MString *uvSet=NULL)
MStatus	getAssignedUVs (MIntArray &uvCounts, MIntArray &uvIds, const MString *uvSet=NULL) const
MStatus	getUvShellsIds (MIntArray &uvShellIds, unsigned int &nbUvShells, const MString *uvSet=NULL) const
int	numColorSets (MStatus *ReturnStatus=NULL) const
MString	createColorSetWithName (const MString &colorSetName, MDGModifier modifier=NULL, const MUintArray instances=NULL, MStatus *ReturnStatus=NULL)
MStatus	deleteColorSet (const MString &colorSetName, MDGModifier modifier=NULL, MSelectionList currentSelection=NULL)
MStatus	setCurrentColorSetName (const MString &setName, MDGModifier modifier=NULL, MSelectionList currentSelection=NULL)
MString	currentColorSetName (int instance=-1, MStatus *ReturnStatus=NULL) const
MStatus	getColorSetNames (MStringArray &setNames) const
MStatus	getColorSetFamilyNames (MStringArray &familyNames) const
MStatus	getColorSetsInFamily (const MString &familyName, MStringArray &setNames) const
bool	isColorSetPerInstance (const MString &name, MStatus *ReturnStatus=NULL) const
MStatus	getAssociatedColorSetInstances (const MString &setName, MIntArray &instances) const
MStatus	setFaceColor (MColor &color, int index)
MStatus	setFaceColor (MColor &color, int index, MColorRepresentation rep)
MStatus	setVertexColor (MColor &color, int index, MDGModifier *modifier=NULL)
MStatus	setVertexColor (MColor &color, int index, MDGModifier *modifier, MColorRepresentation rep)
MStatus	setFaceVertexColor (MColor &color, int faceIndex, int vertexIndex, MDGModifier *modifier=NULL)
MStatus	setFaceVertexColor (MColor &color, int faceIndex, int vertexIndex, MDGModifier *modifier, MColorRepresentation rep)
MStatus	setFaceVertexColor (int faceIndex, int localVertexIndex, MColor &color, MDGModifier *modifier=NULL)
MStatus	setFaceVertexColor (int faceIndex, int localVertexIndex, MColor &color, MDGModifier *modifier, MColorRepresentation rep)
MStatus	setFaceColors (MColorArray &colors, MIntArray &faceList)
MStatus	setFaceColors (MColorArray &colors, MIntArray &faceList, MColorRepresentation rep)
MStatus	setVertexColors (MColorArray &colors, MIntArray &vertexList, MDGModifier *modifier=NULL)
MStatus	setVertexColors (MColorArray &colors, MIntArray &vertexList, MDGModifier *modifier, MColorRepresentation rep)
MStatus	setFaceVertexColors (MColorArray &colors, MIntArray &faceList, MIntArray &vertexList, MDGModifier *modifier=NULL)
MStatus	setFaceVertexColors (MColorArray &colors, MIntArray &faceList, MIntArray &vertexList, MDGModifier *modifier, MColorRepresentation rep)
MStatus	removeFaceColors (MIntArray &faceList)
MStatus	removeVertexColors (MIntArray &vertexList)
MStatus	removeFaceVertexColors (MIntArray &faceList, MIntArray &vertexList)
MStatus	getVertexColors (MColorArray &colors, const MString colorSet=NULL, const MColor defaultUnsetColor=NULL)
MStatus	getFaceVertexColors (MColorArray &colors, const MString colorSet=NULL, const MColor defaultUnsetColor=NULL)
MStatus	getFaceVertexColorIndex (int faceIndex, int localVertexIndex, int &colorIndex, const MString *colorSet=NULL)
MStatus	setColors (const MColorArray &colors, const MString *colorSet=NULL)
MStatus	setColors (const MColorArray &colors, const MString *colorSet, MColorRepresentation rep)
MStatus	setSomeColors (const MIntArray &colorIds, const MColorArray &colors, const MString *colorSet=NULL)
MStatus	setSomeColors (const MIntArray &colorIds, const MColorArray &colors, const MString *colorSet, MColorRepresentation rep)
MStatus	getColors (MColorArray &colors, const MString colorSet=NULL, const MColor defaultUnsetColor=NULL) const
MStatus	getColorIndex (int faceIndex, int localVertexIndex, int &colorIndex, const MString *colorSet=NULL)
MStatus	setColor (int colorId, const MColor &color, const MString *colorSet=NULL)
MStatus	setColor (int colorId, const MColor &color, const MString *colorSet, MColorRepresentation rep)
MStatus	getColor (int colorId, MColor &color, const MString colorSet=NULL, const MColor defaultUnsetColor=NULL) const
MStatus	assignColor (int polygonId, int vertexIndex, int colorId, const MString *colorSet=NULL)
MStatus	assignColors (const MIntArray &colorIds, const MString *colorSet=NULL)
MStatus	clearColors (const MString *colorSet=NULL)
int	getHoles (MIntArray &holeInfoArray, MIntArray &holeVertexArray, MStatus *ReturnStatus=NULL)
bool	onBoundary (int polygonId, MStatus *ReturnStatus=NULL) const
bool	isBlindDataTypeUsed (int blindDataId, MStatus *ReturnStatus=NULL) const
MStatus	createBlindDataType (int blindDataId, MStringArray longNames, MStringArray shortNames, MStringArray formatNames)
bool	hasBlindDataComponentId (int compID, MFn::Type compType, int blindDataId, MStatus *ReturnStatus=NULL) const
bool	hasBlindData (MFn::Type compType, int blindDataId, MStatus *ReturnStatus=NULL) const
bool	hasBlindDataComponentId (int compID, MFn::Type compType, MStatus *ReturnStatus=NULL) const
bool	hasBlindData (MFn::Type compType, MStatus *ReturnStatus=NULL) const
MStatus	getBlindDataTypes (MFn::Type compType, MIntArray &blindDataIds) const
MStatus	getBlindDataAttrNames (int blindDataId, MStringArray &longNames, MStringArray &shortNames, MStringArray &formatNames) const
MStatus	getFaceVertexBlindDataIndex (int faceIndex, int vertexIndex, int &blindDataIndex) const
MStatus	getBlindDataFaceVertexIndices (int blindDataIndex, int &faceIndex, int &vertexIndex) const
MStatus	getIntBlindData (int compID, MFn::Type compType, int blindDataId, MString attrName, int &data) const
MStatus	getIntBlindData (MFn::Type compType, int blindDataId, MString attrName, MIntArray &compIDs, MIntArray &data) const
MStatus	getFloatBlindData (int compID, MFn::Type compType, int blindDataId, MString attrName, float &data) const
MStatus	getFloatBlindData (MFn::Type compType, int blindDataId, MString attrName, MIntArray &compIDs, MFloatArray &data) const
MStatus	getDoubleBlindData (int compID, MFn::Type compType, int blindDataId, MString attrName, double &data) const
MStatus	getDoubleBlindData (MFn::Type compType, int blindDataId, MString attrName, MIntArray &compIDs, MDoubleArray &data) const
MStatus	getBoolBlindData (int compID, MFn::Type compType, int blindDataId, MString attrName, bool &data) const
MStatus	getBoolBlindData (MFn::Type compType, int blindDataId, MString attrName, MIntArray &compIDs, MIntArray &data) const
MString	stringBlindDataComponentId (int compID, MFn::Type compType, int blindDataId, MString attrName, MStatus *ReturnStatus=NULL) const
MStatus	getStringBlindData (MFn::Type compType, int blindDataId, MString attrName, MIntArray &compIDs, MStringArray &data) const
MString	binaryBlindDataComponentId (int compID, MFn::Type compType, int blindDataId, MString attrName, MStatus *ReturnStatus=NULL) const
MStatus	getBinaryBlindData (MFn::Type compType, int blindDataId, MString attrName, MIntArray &compIDs, MStringArray &data) const
MStatus	setIntBlindData (int compID, MFn::Type compType, int blindDataId, MString attrName, int data)
MStatus	setIntBlindData (MIntArray &compIDs, MFn::Type compType, int blindDataId, MString attrName, int data)
MStatus	setIntBlindData (MIntArray &compIDs, MFn::Type compType, int blindDataId, MString attrName, MIntArray &data)
MStatus	setFloatBlindData (int compID, MFn::Type compType, int blindDataId, MString attrName, float data)
MStatus	setFloatBlindData (MIntArray &compIDs, MFn::Type compType, int blindDataId, MString attrName, float data)
MStatus	setFloatBlindData (MIntArray &compIDs, MFn::Type compType, int blindDataId, MString attrName, MFloatArray &data)
MStatus	setDoubleBlindData (int compID, MFn::Type compType, int blindDataId, MString attrName, double data)
MStatus	setDoubleBlindData (MIntArray &compIDs, MFn::Type compType, int blindDataId, MString attrName, double data)
MStatus	setDoubleBlindData (MIntArray &compIDs, MFn::Type compType, int blindDataId, MString attrName, MDoubleArray &data)
MStatus	setBoolBlindData (int compID, MFn::Type compType, int blindDataId, MString attrName, bool data)
MStatus	setBoolBlindData (MIntArray &compIDs, MFn::Type compType, int blindDataId, MString attrName, bool data)
MStatus	setBoolBlindData (MIntArray &compIDs, MFn::Type compType, int blindDataId, MString attrName, MIntArray &data)
MStatus	setStringBlindData (int compID, MFn::Type compType, int blindDataId, MString attrName, MString data)
MStatus	setStringBlindData (MIntArray &compIDs, MFn::Type compType, int blindDataId, MString attrName, MString data)
MStatus	setStringBlindData (MIntArray &compIDs, MFn::Type compType, int blindDataId, MString attrName, MStringArray &data)
MStatus	setBinaryBlindData (int compID, MFn::Type compType, int blindDataId, MString attrName, MString data)
MStatus	setBinaryBlindData (MIntArray &compIDs, MFn::Type compType, int blindDataId, MString attrName, MString data)
MStatus	setBinaryBlindData (MIntArray &compIDs, MFn::Type compType, int blindDataId, MString attrName, MStringArray &data)
MStatus	setBinaryBlindData (int compID, MFn::Type compType, int blindDataId, MString attrName, char *data, int length)
MStatus	clearBlindData (int compID, MFn::Type compType, int blindDataId, MString attrName)
MStatus	clearBlindData (MFn::Type compType, int blindDataId, MString attrName)
MStatus	clearBlindData (MFn::Type compType)
MStatus	clearBlindData (int compID, MFn::Type compType, int blindDataId)
MStatus	clearBlindData (MFn::Type compType, int blindDataId)
void	setCheckSamePointTwice (bool check=true)
bool	getCheckSamePointTwice (void)
MStatus	createInPlace (int numVertices, int numPolygons, const MFloatPointArray &vertexArray, const MIntArray &polygonCounts, const MIntArray &polygonConnects)
MStatus	copyInPlace (const MObject &source)
MString	createColorSetWithName (const MString &colorSetName, MDGModifier modifier, MStatus ReturnStatus)
	This method is obsolete.
MString	currentColorSetName (MStatus *ReturnStatus) const
	This method is obsolete. This method is not available in Python.
MObject	generateSmoothMesh (MObject parentOrOwner, MStatus *ReturnStatus)
	This method is obsolete.
	MFnMesh (const MObject &object, MStatus *ret=NULL)
	Constructor.
MObject	addPolygon (MPointArray &vertexArray, double polyTolerance, bool mergeVertices=true, double pointTolerance=1.0e-10, bool forceGeometry=true, MObject parentOrOwner=MObject::kNullObj, MStatus *ReturnStatus=NULL)
	This method is obsolete. This method is not available in Python.
bool	intersect (MPoint &raySource, MVector &rayDirection, MPointArray &points, MStatus *ReturnStatus=NULL) const
	This method is obsolete. This method is not available in Python.
bool	intersect (const MPoint &raySource, const MVector &rayDirection, MPointArray &points, MStatus *ReturnStatus=NULL) const
	This method is obsolete. This method is not available in Python.
MStatus	getBlindDataAttrNames (int blindDataId, MStringArray &longNames, MStringArray &shortNames) const
bool	hasBlindData (int compID, MFn::Type compType, int blindDataId, MStatus *ReturnStatus=NULL) const
	This method is obsolete. This method is not available in Python.
bool	hasBlindData (int compID, MFn::Type compType, MStatus *ReturnStatus=NULL) const
	This method is obsolete. This method is not available in Python.
MStatus	createUVSet (MString &uvSetName, MDGModifier modifier=NULL, const MUintArray instances=NULL)
	This method is not available in Python.
MStatus	copyUVSet (const MString &fromName, MString &toName, MDGModifier *modifier=NULL)
	This method is not available in Python.
MStatus	getCurrentUVSetName (MString &setName, int instance=-1) const
	This method is not available in Python.
MStatus	createColorSet (MString &colorSetName, MDGModifier modifier=NULL, const MUintArray instances=NULL)
	This method is not available in Python.
MStatus	createColorSet (MString &colorSetName, MDGModifier modifier, bool clamped, MColorRepresentation rep, const MUintArray instances=NULL)
	This method is not available in Python.
MStatus	getCurrentColorSetName (MString &setName, int instance=-1) const
	This method is not available in Python.
MStatus	getStringBlindData (int compID, MFn::Type compType, int blindDataId, MString attrName, MString &data) const
	This method is obsolete. This method is not available in Python.
MStatus	getBinaryBlindData (int compID, MFn::Type compType, int blindDataId, MString attrName, MString &data) const
	This method is obsolete. This method is not available in Python.
Static Public Member Functions
static MMeshIsectAccelParams	uniformGridParams (int xDiv, int yDiv, int zDiv)
static MMeshIsectAccelParams	autoUniformGridParams ()
static MString	globalIntersectionAcceleratorsInfo ()
static void	clearGlobalIntersectionAcceleratorInfo ()
Protected Member Functions
virtual const char *	className () const
	Class name.

Member Enumeration Documentation

enum MFnMesh::MColorRepresentation

Specifies which color components are used by a colorSet.

Enumerator:

kAlpha	Alpha only.
kRGB	Red, green and blue only.
kRGBA	Red, green, blue and alpha.

enum MFnMesh::SplitPlacement

Specifies how a point along split is to be determined.

Enumerator:

kOnEdge	Split at a position along an edge.
kInternalPoint	Split at a point within a face.
kInvalid

enum MFnMesh::BoolOperation

Boolean operators.

Enumerator:

kIntersection	Boolean interesection.
kDifference	Boolean difference.
kUnion	Boolean union.

Constructor & Destructor Documentation

MFnMesh::~MFnMesh ( ) [virtual]

Destructor.

Class destructor.

MFnMesh::MFnMesh	(	MObject &	object,
		MStatus *	ReturnStatus = `NULL`
	)

Constructor.

Class constructor that initializes the function set to the given MObject.

Parameters:

`[in]`	object	The MObject to attach the function set to
`[out]`	ReturnStatus	the return status

Status Codes:

MS::kSuccess if the function set is successfully attached
MS::kInvalidParameter if the MObject does not represent a valid Maya object or if the function set is not allowed to attach to this MObject

MFnMesh::MFnMesh	(	const MDagPath &	object,
		MStatus *	ReturnStatus = `NULL`
	)

Constructor.

Class constructor that initializes the function set to the given constant MDagPath object.

Parameters:

`[in]`	object	The const MDagPath to attach the function set to
`[out]`	ReturnStatus	The return status

Status Codes:

MS::kSuccess if the function set is successfully attached
MS::kInvalidParameter if the MObject does not represent a valid Maya object or if the function set is not allowed to attach to this MObject

MFnMesh::MFnMesh	(	const MObject &	object,
		MStatus *	ReturnStatus = `NULL`
	)

Constructor.

Class constructor that initializes the function set to the given MObject.

Parameters:

`[in]`	object	The MObject to attach the function set to
`[out]`	ReturnStatus	the return status

Status Codes:

MS::kSuccess if the function set is successfully attached
MS::kInvalidParameter if the MObject does not represent a valid Maya object or if the function set is not allowed to attach to this MObject

Member Function Documentation

MFn::Type MFnMesh::type ( ) const [virtual]

Function set type.

Return the class type : MFn::kMesh

Reimplemented from MFnDagNode.

const char * MFnMesh::className ( ) const [protected, virtual]

Class name.

Return the class name : "MFnMesh"

Reimplemented from MFnDagNode.

MObject MFnMesh::create	(	int	numVertices,
		int	numPolygons,
		const MFloatPointArray &	vertexArray,
		const MIntArray &	polygonCounts,
		const MIntArray &	polygonConnects,
		MObject	parentOrOwner = `MObject::kNullObj`,
		MStatus *	ReturnStatus = `NULL`
	)

Creates a new polygonal mesh given an array of vertices and polygon connection information and sets this function set to operate on the new surface.

This method is meant to be as efficient as possible and thus assumes that all the given data is topologically correct.

The parentOrOwner argument is used to specify the owner of the new surface.

If the parentOrOwner is kMeshData then the created surface will be of type kMeshGeom and will be returned. The parentOrOwner will become the owner of the new mesh.

If parentOrOwner is NULL then a new transform will be created and returned which will be the parent for the mesh. The new transform will be added to the DAG.

If parentOrOwner is a DAG node then the new mesh will be returned and the parentOrOwner will become its parent.

Parameters:

`[in]`	numVertices	number of vertices
`[in]`	numPolygons	number of polygons
`[in]`	vertexArray	point (vertex) array. This should include all the vertices in the mesh, and no extras. For example, a cube could have the vertices: { (-1,-1,-1), (1,-1,-1), (1,-1,1), (-1,-1,1), (-1,1,-1), (-1,1,1), (1,1,1), (1,1,-1) }
`[in]`	polygonCounts	array of vertex counts for each polygon. For example the cube would have 6 faces, each of which had 4 verts, so the polygonCounts would be {4,4,4,4,4,4}.
`[in]`	polygonConnects	array of vertex connections for each polygon. For example, in the cube, we have 4 vertices for every face, so we list the vertices for face0, face1, etc consecutively in the array. These are specified by indexes in the vertexArray: e.g for the cube: { 0, 1, 2, 3, 4, 5, 6, 7, 3, 2, 6, 5, 0, 3, 5, 4, 0, 4, 7, 1, 1, 7, 6, 2 }
`[in]`	parentOrOwner	parent of the polygon that will be created
`[out]`	ReturnStatus	Status code

Returns:

If parentOrOwner is NULL then the transform for this surface is returned
If parentOrOwner is a DAG object then the new surface shape is returned
The surface geometry is returned if parentOrOwner is of type kMeshData

Status Codes:

MS:kSuccess The method was successful.
MS::kLicenseFailure Application not licensed for attempted operation
MS::kInvalidParameter One of the following parameter errors

Array length does not match given item count
parentOrOwner was not valid
There was no model present to add the object to

MS::kFailure An object error has occurred.
MS::kInsufficientMemory Insufficient memory to complete this method

Examples:

animCubeNode.cpp, blindDataMesh.cpp, polyPrimitiveCmd.cpp, and shellNode.cpp.

MObject MFnMesh::create	(	int	numVertices,
		int	numPolygons,
		const MPointArray &	vertexArray,
		const MIntArray &	polygonCounts,
		const MIntArray &	polygonConnects,
		MObject	parentOrOwner = `MObject::kNullObj`,
		MStatus *	ReturnStatus = `NULL`
	)

Creates a new polygonal mesh given an array of vertices and polygon connection information and sets this function set to operate on the new surface.

This method is meant to be as efficient as possible and thus assumes that all the given data is topologically correct.

The parentOrOwner argument is used to specify the owner of the new surface.

If the parentOrOwner is kMeshData then the created surface will be of type kMeshGeom and will be returned. The parentOrOwner will become the owner of the new mesh.

If parentOrOwner is NULL then a new transform will be created and returned which will be the parent for the mesh. The new transform will be added to the DAG.

If parentOrOwner is a DAG node then the new mesh will be returned and the parentOrOwner will become its parent.

Parameters:

`[in]`	numVertices	number of vertices
`[in]`	numPolygons	number of polygons
`[in]`	vertexArray	point (vertex) array. This should include all the vertices in the mesh, and no extras. For example, a cube could have the vertices: { (-1,-1,-1), (1,-1,-1), (1,-1,1), (-1,-1,1), (-1,1,-1), (-1,1,1), (1,1,1), (1,1,-1) }
`[in]`	polygonCounts	array of vertex counts for each polygon. For example the cube would have 6 faces, each of which had 4 verts, so the polygonCounts would be {4,4,4,4,4,4}.
`[in]`	polygonConnects	array of vertex connections for each polygon. For example, in the cube, we have 4 vertices for every face, so we list the vertices for face0, face1, etc consecutively in the array. These are specified by indexes in the vertexArray: e.g for the cube: { 0, 1, 2, 3, 4, 5, 6, 7, 3, 2, 6, 5, 0, 3, 5, 4,0, 4, 7, 1, 1, 7, 6, 2 }
`[in]`	parentOrOwner	parent of the polygon that will be created
`[out]`	ReturnStatus	Status code

Returns:

If parentOrOwner is NULL then the transform for this surface is returned
If parentOrOwner is a DAG object then the new surface shape is returned
The surface geometry is returned if parentOrOwner is of type kMeshData

Status Codes:

MS::kSuccess The method was successful.
MS::kLicenseFailure Application not licensed for attempted operation
MS::kInvalidParameter One of the following parameter errors

Array length does not match given item count
parentOrOwner was not valid
There was no model present to add the object to

MS::kFailure An object error has occurred.
MS::kInsufficientMemory Insufficient memory to complete this method

MObject MFnMesh::create	(	int	numVertices,
		int	numPolygons,
		const MFloatPointArray &	vertexArray,
		const MIntArray &	polygonCounts,
		const MIntArray &	polygonConnects,
		const MFloatArray &	uArray,
		const MFloatArray &	vArray,
		MObject	parentOrOwner = `MObject::kNullObj`,
		MStatus *	ReturnStatus = `NULL`
	)

Creates a new polygonal mesh given an array of vertices, polygon connection information, UV information, and sets this function set to operate on the new surface.

This method is meant to be as efficient as possible and thus assumes that all the given data is topologically correct.

The parentOrOwner argument is used to specify the owner of the new surface.

If the parentOrOwner is kMeshData then the created surface will be of type kMeshGeom and will be returned. The parentOrOwner will become the owner of the new mesh.

If parentOrOwner is NULL then a new transform will be created and returned which will be the parent for the mesh. The new transform will be added to the DAG.

If parentOrOwner is a DAG node then the new mesh will be returned and the parentOrOwner will become its parent.

The uv arrays must be of equal size. After using this method to create the mesh and the UV values, you can call assignUVs to assign the corresponding UV ids to the geometry.

Parameters:

`[in]`	numVertices	number of vertices
`[in]`	numPolygons	number of polygons
`[in]`	vertexArray	point (vertex) array. This should include all the vertices in the mesh, and no extras. For example, a cube could have the vertices: { (-1,-1,-1), (1,-1,-1), (1,-1,1), (-1,-1,1), (-1,1,-1), (-1,1,1), (1,1,1), (1,1,-1) }
`[in]`	polygonCounts	array of vertex counts for each polygon. For example the cube would have 6 faces, each of which had 4 verts, so the polygonCounts would be {4,4,4,4,4,4}.
`[in]`	polygonConnects	array of vertex connections for each polygon. For example, in the cube, we have 4 vertices for every face, so we list the vertices for face0, face1, etc consecutively in the array. These are specified by indexes in the vertexArray: e.g for the cube: { 0, 1, 2, 3, 4, 5, 6, 7, 3, 2, 6, 5, 0, 3, 5, 4,0, 4, 7, 1, 1, 7, 6, 2 }
`[in]`	uArray	The array of u values to be set
`[in]`	vArray	The array of v values to be set
`[in]`	parentOrOwner	parent of the polygon that will be created
`[out]`	ReturnStatus	Status code

Returns:

If parentOrOwner is NULL then the transform for this surface is returned
If parentOrOwner is a DAG object then the new surface shape is returned
The surface geometry is returned if parentOrOwner is of type kMeshData

Status Codes:

MS::kSuccess The method was successful.
MS::kLicenseFailure Application not licensed for attempted operation
MS::kInvalidParameter One of the following parameter errors

Array length does not match given item count
parentOrOwner was not valid
There was no model present to add the object to

MS::kFailure An object error has occurred.
MS::kInsufficientMemory Insufficient memory to complete this method

MObject MFnMesh::create	(	int	numVertices,
		int	numPolygons,
		const MPointArray &	vertexArray,
		const MIntArray &	polygonCounts,
		const MIntArray &	polygonConnects,
		const MFloatArray &	uArray,
		const MFloatArray &	vArray,
		MObject	parentOrOwner = `MObject::kNullObj`,
		MStatus *	ReturnStatus = `NULL`
	)

Creates a new polygonal mesh given an array of vertices, polygon connection information, UV information, and sets this function set to operate on the new surface.

This method is meant to be as efficient as possible and thus assumes that all the given data is topologically correct.

The parentOrOwner argument is used to specify the owner of the new surface.

If the parentOrOwner is kMeshData then the created surface will be of type kMeshGeom and will be returned. The parentOrOwner will become the owner of the new mesh.

If parentOrOwner is NULL then a new transform will be created and returned which will be the parent for the mesh. The new transform will be added to the DAG.

If parentOrOwner is a DAG node then the new mesh will be returned and the parentOrOwner will become its parent.

The uv arrays must be of equal size. After using this method to create the mesh and the UV values, you can call assignUVs to assign the corresponding UV ids to the geometry.

Parameters:

`[in]`	numVertices	number of vertices
`[in]`	numPolygons	number of polygons
`[in]`	vertexArray	point (vertex) array. This should include all the vertices in the mesh, and no extras. For example, a cube could have the vertices: { (-1,-1,-1), (1,-1,-1), (1,-1,1), (-1,-1,1), (-1,1,-1), (-1,1,1), (1,1,1), (1,1,-1) }
`[in]`	polygonCounts	array of vertex counts for each polygon. For example the cube would have 6 faces, each of which had 4 verts, so the polygonCounts would be {4,4,4,4,4,4}.
`[in]`	polygonConnects	array of vertex connections for each polygon. For example, in the cube, we have 4 vertices for every face, so we list the vertices for face0, face1, etc consecutively in the array. These are specified by indexes in the vertexArray: e.g for the cube: { 0, 1, 2, 3, 4, 5, 6, 7, 3, 2, 6, 5, 0, 3, 5, 4,0, 4, 7, 1, 1, 7, 6, 2 }
`[in]`	uArray	The array of u values to be set
`[in]`	vArray	The array of v values to be set
`[in]`	parentOrOwner	parent of the polygon that will be created
`[out]`	ReturnStatus	Status code

Returns:

If parentOrOwner is NULL then the transform for this surface is returned
If parentOrOwner is a DAG object then the new surface shape is returned
The surface geometry is returned if parentOrOwner is of type kMeshData

Status Codes:

MS::kSuccess The method was successful.
MS::kLicenseFailure Application not licensed for attempted operation
MS::kInvalidParameter One of the following parameter errors

Array length does not match given item count
parentOrOwner was not valid
There was no model present to add the object to

MS::kFailure An object error has occurred.
MS::kInsufficientMemory Insufficient memory to complete this method

MObject MFnMesh::generateSmoothMesh	(	MObject	parentOrOwner = `MObject::kNullObj`,
		MMeshSmoothOptions *	options = `NULL`,
		MStatus *	ReturnStatus = `NULL`
	)

Creates a new polygonal mesh using either the Smooth Mesh Preview attributes of this mesh or a set of options specified in an MMeshSmoothOptions object. Unlike the MFnMesh::create functions, this function does not set this function set to operate on the new surface.

The parentOrOwner argument is used to specify the owner of the new surface.

If the parentOrOwner is kMeshData then the created surface will be of type kMeshGeom and will be returned. The parentOrOwner will become the owner of the new mesh.

If parentOrOwner is NULL then a new transform will be created and returned which will be the parent for the mesh. The new transform will be added to the DAG.

If parentOrOwner is a DAG node then the new mesh will be returned and the parentOrOwner will become its parent.

Parameters:

`[in]`	parentOrOwner	parent of the polygon that will be created
`[in]`	options	Set of options to use when generating the smoothed mesh
`[out]`	ReturnStatus	Status code

Returns:

If parentOrOwner is NULL then the transform for this surface is returned
If parentOrOwner is a DAG object then the new surface shape is returned
The surface geometry is returned if parentOrOwner is of type kMeshData

Status Codes:

MS::kSuccess The method was successful.
MS::kLicenseFailure Application not licensed for attempted operation
MS::kInvalidParameter One of the following parameter errors

parentOrOwner was not valid
There was no model present to add the object to

MS::kFailure An object error has occurred.
MS::kInsufficientMemory Insufficient memory to complete this method

MStatus MFnMesh::getSmoothMeshDisplayOptions ( MMeshSmoothOptions & options ) const

Retrieve the current display smoothing options for the mesh

Parameters:

[out] options storge for the options

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::setSmoothMeshDisplayOptions ( const MMeshSmoothOptions & options )

Sets the current display smoothing options for the mesh

Parameters:

[in] options Options to set

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MObject MFnMesh::addPolygon	(	const MPointArray &	vertexArray,
		bool	mergeVertices = `true`,
		double	pointTolerance = `1.0e-10`,
		MObject	parentOrOwner = `MObject::kNullObj`,
		MStatus *	ReturnStatus = `NULL`
	)

Adds a new polygon to this polygonal mesh.

If there is no current geometry then a new polygonal mesh is created and parentOrOwner is used to specify the owner of the new surface. If parentOrOwner is NULL or a DAG parent is specified, then a new transform will be created in the DAG and returned. If the parentOrOwner is kMeshData then the new surface will become its data and the geometry will be returned.

If we are adding to an existing polygonal mesh then parentOrOwner is ignored and the geometry is returned.

Parameters:

`[in]`	vertexArray	array of ordered vertices that make up the polygon
`[in]`	mergeVertices	If true then if a vertex falls within pointTolerance of an existing vertex then the existing vertex is reused.
`[in]`	pointTolerance	specifies how close verticies have to be to before they are merged. This merging is only done if mergeVerticies is true.
`[in]`	parentOrOwner	the DAG parent or kMeshData the new surface will belong to
`[out]`	ReturnStatus	status code

Returns:: The transform if one is created, otherwise the geometry.

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MObject MFnMesh::addPolygon	(	const MPointArray &	vertexArray,
		int &	faceIndex,
		bool	mergeVertices = `true`,
		double	pointTolerance = `1.0e-10`,
		MObject	parentOrOwner = `MObject::kNullObj`,
		MStatus *	ReturnStatus = `NULL`
	)

Adds a new polygon to this polygonal mesh. Return an index of the created polygon.

If there is no current geometry then a new polygonal mesh is created and parentOrOwner is used to specify the owner of the new surface. If parentOrOwner is NULL or a DAG parent is specified, then a new transform will be created in the DAG and returned. If the parentOrOwner is kMeshData then the new surface will become its data and the geometry will be returned.

If we are adding to an existing polygonal mesh then parentOrOwner is ignored and the geometry is returned.

Parameters:

`[in]`	vertexArray	Array of ordered vertices that make up the polygon.
`[out]`	faceIndex	Index of the newly added polygon.
`[in]`	mergeVertices	If true then if a vertex falls within pointTolerance of an existing vertex then the existing vertex is reused.
`[in]`	pointTolerance	Specifies how close verticies have to be to before they are merged. This merging is only done if mergeVerticies is true.
`[in]`	parentOrOwner	The DAG parent or kMeshData the new surface will belong to.
`[out]`	ReturnStatus	Status code.

Returns:: The transform if one is created, otherwise the geometry.

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::deleteFace	(	int	faceId,
		MDGModifier *	modifier = `NULL`
	)

Delete this face. The method will return failure if an attempt is made to delete the last polygonal face in the object.

Parameters:

`[in]`	faceId	The face to delete
`[in]`	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::deleteEdge	(	int	edgeId,
		MDGModifier *	modifier = `NULL`
	)

Delete this edge.

Parameters:

`[in]`	edgeId	The edge to delete
`[in]`	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::deleteVertex	(	int	vertexId,
		MDGModifier *	modifier = `NULL`
	)

Delete this vertex.

Parameters:

`[in]`	vertexId	The object-relative (mehs-relative/global) vertex index to delete
`[in]`	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::split	(	MIntArray &	placements,
		MIntArray &	edgeList,
		MFloatArray &	edgeFactors,
		MFloatPointArray &	internalPoints
	)

This function splits a set of edges and faces in a continuous manner.

The elements of the placements array must be elements of the SplitPlacement enumeration. For each SplitPlacement::kOnEdge element in the placements array, an equivalent edge ID and factor must be included in the edgeList and edgeFactors arrays. Similarly for SplitPlacement::kInternalPoint elements and the internalPoints array. The equivalent elements must be in the same order in all three arrays so that the first SplitPlacement::kOnEdge element in the placements array maps to the first elements in the edgeList and edgeFactors arrays. If one of the vertices cannot be created, the whole algorithm fails. The same edge cannot be split more than once.

The split must also start and end on an edge. This means that the first and last elements in the placements array must be SplitPlacement::kOnEdge values. If the placements array does not start and end on an edge then the code will still succeed but the mesh will not be split.

NOTE: the algorithm used by this method is the same as the polySplit command and has similar limitations.

Parameters:

`[in]`	placements	array that contains elements of the SplitPlacement enumeration. They represent where to place the new vertices for the split.
`[in]`	edgeList	array of edge IDs to be split, in order of their appearance in the split. There must be as many elements in this array as there are SplitPlacement::kOnEdge elements in the placements array.
`[in]`	edgeFactors	array of factors in the range [0,1] that represent how far along each edge must the split be done. This array must have the same number of elements as the edgeList array.
`[in]`	internalPoints	array of positions for the vertices that will be added inside existing faces. There must be as many elements in this array as there are SplitPlacement::kInternalPoint elements in the placements array. This array can be empty. Internal points should be specified on the face between the previous edge id and the next edge id.

Returns:: Status Code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter One of the following parameter errors

MS::kIndexOutOfRange One or more of the edge IDs are not on the mesh.
MS::kValueOutOfRange One or more of the edge factors are not within the [0,1] range
MS::kInvalidParameter The split algorithm could not be completed successfully or the array sizes are not appropriate.
MS::kNotFound The given placements list is empty.

MS::kFailure An object error has occurred.

MS::kObjectDoesNotExist The base stucture was not initialized properly
MS::kShapeHasNoGeometry The mesh shape has no geometry to work on

Examples:

meshOpFtyAction.cpp.

MStatus MFnMesh::subdivideFaces	(	MIntArray &	faceList,
		int	divisionCount
	)

This function subdivides multiple faces. This method only accepts faces that are three of four-sided. The operation adds a vertex in the middle of each given face and connects it to the middle of every edge in the given face. This results in three or four new faces for each original face.

Parameters:

`[in]`	faceList	array of face IDs to subdivide
`[in]`	divisionCount	number of subsequent subdivisions to do

Returns:: Status Code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter One of the following parameter errors

MS::kValueOutOfRange The given subdivision count is less than 1
MS::kIndexOutOfRange The given faceIDs are not on the mesh
MS::kInvalidParameter The given information cannot result in the subdivision of the faces.
MS::kNotFound The given face list is empty

MS::kFailure An object error has occurred.

MS::kObjectDoesNotExist The base stucture was not initialized properly
MS::kShapeHasNoGeometry The mesh shape has no geometry to work on

Examples:

meshOpFtyAction.cpp.

MStatus MFnMesh::subdivideEdges	(	MIntArray &	edgeList,
		int	divisionCount
	)

This function subdivides edges at regular intervals. The divisionCount argument is the number of subdivisions per edges and represents the number of new vertices created on each edge.

For example, a divisionCount of 2 will add a new vertex on every edge in the edgeList 33% along the edges and a new vertex at 67% along the edges.

Parameters:

`[in]`	edgeList	array of edge component IDs to be subdivided
`[in]`	divisionCount	number of subsequent subdivisions to do

Returns:: Status Code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter One of the following parameter errors

MS::kIndexOutOfRange The given edge IDs are not on the mesh
MS::kValueOutOfRange The given subdivision count is less than 1
MS::kInvalidParameter The subdivisions could not be completed successfully.
MS::kNotFound The given edge list is empty

MS::kFailure An object error has occurred.

MS::kObjectDoesNotExist The base stucture was not initialized properly
MS::kShapeHasNoGeometry The mesh shape has no geometry to work on

Examples:

meshOpFtyAction.cpp.

MStatus MFnMesh::extrudeFaces	(	MIntArray &	faceList,
		int	extrusionCount,
		MFloatVector *	translation,
		bool	extrudeTogether
	)

This function extrudes a set of faces. The resulting mesh will have extra parallelograms coming out of the edges of the given polygons going to the new extruded edges. The extrusionCount argument is the number of subsequent extrusions per polygon and represents the number of faces that will be created for each edge of the polygons in the list.

Parameters:

`[in]`	faceList	array of face component IDs to be extruded
`[in]`	extrusionCount	number of subsequent extrusions to do
`[in]`	translation	translation vector to apply to the extruded elements. This is a world-space translation. Use NULL if not required.
`[in]`	extrudeTogether	sets whether the components should be extruded individually or together, as if one complex component was being extruded.

Returns:: Status Code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter One of the following parameter errors

MS::kIndexOutOfRange The given face IDs are not on the mesh
MS::kValueOutOfRange The given extrusion count is less than 1
MS::kInvalidParameter The extrusion could not be completed successfully.
MS::kNotFound The given face list is empty

MS::kFailure An object error has occurred.

MS::kObjectDoesNotExist The base stucture was not initialized properly
MS::kShapeHasNoGeometry The mesh shape has no geometry to work on

Examples:

meshOpFtyAction.cpp.

MStatus MFnMesh::extrudeEdges	(	MIntArray &	edgeList,
		int	extrusionCount,
		MFloatVector *	translation,
		bool	extrudeTogether
	)

This function extrudes edges. The resulting mesh will have extra parallelograms coming out of the given edges and going to the new extruded edges. The extrusionCount argument is the number of subsequent extrusions per edges and represents the number of polygons that will be created from each given edge to the extruded edges.

Parameters:

`[in]`	edgeList	array of edge component IDs to be extruded
`[in]`	extrusionCount	number of subsequent extrusions to do
`[in]`	translation	translation vector to apply to the extruded elements. This is a world-space translation. Use NULL if not required.
`[in]`	extrudeTogether	sets whether the components should be extruded individually or together, as if one complex component was being extruded.

Returns:: Status Code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter One of the following parameter errors

MS::kIndexOutOfRange The given edge IDs are not on the mesh
MS::kValueOutOfRange The given extrusion count is less than 1
MS::kInvalidParameter The extrusion could not be completed successfully.
MS::kNotFound The given edge list is empty

MS::kFailure An object error has occurred.

MS::kObjectDoesNotExist The base stucture was not initialized properly
MS::kShapeHasNoGeometry The mesh shape has no geometry to work on

Examples:

meshOpFtyAction.cpp.

MStatus MFnMesh::duplicateFaces	(	MIntArray &	faceList,
		MFloatVector *	translation
	)

This function duplicates a set of faces and detaches them from the rest of the mesh. The resulting mesh will contain one more independant piece of geometry.

Parameters:

`[in]`	faceList	array of face component IDs to be duplicated
`[in]`	translation	translation vector to apply to the duplicated elements. This is a world-space translation. Use NULL if not required.

Returns:: Status Code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter One of the following parameter errors

MS::kIndexOutOfRange The given face IDs are not on the mesh
MS::kInvalidParameter The duplication could not be completed successfully.
MS::kNotFound The given face list is empty

MS::kFailure An object error has occurred.

MS::kObjectDoesNotExist The base stucture was not initialized properly
MS::kShapeHasNoGeometry The mesh shape has no geometry to work on

Examples:

meshOpFtyAction.cpp.

MStatus MFnMesh::extractFaces	(	MIntArray &	faceList,
		MFloatVector *	translation
	)

This function detaches a set of faces from the mesh so that the resulting mesh will contain one more independant piece of geometry and leaves a hole where the faces use to be.

Parameters:

`[in]`	faceList	array of face component IDs to be extracted
`[in]`	translation	translation vector to apply to the extracted elements. This is a world-space translation. Use NULL if not required.

Returns:: Status Code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter One of the following parameter errors

MS::kIndexOutOfRange The given face IDs are not on the mesh
MS::kInvalidParameter The extraction could not be completed successfully.
MS::kNotFound The given face list is empty

MS::kFailure An object error has occurred.

MS::kObjectDoesNotExist The base stucture was not initialized properly
MS::kShapeHasNoGeometry The mesh shape has no geometry to work on

Examples:

meshOpFtyAction.cpp.

MStatus MFnMesh::collapseFaces ( MIntArray & faceList )

This function collapse faces into vertices. Non-adjacent faces will be collapsed individually so that each pieces of adjacent faces turn into one vertex.

Parameters:

[in] faceList array of face component IDs to be collapsed

Returns:: Status Code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter One of the following parameter errors

MS::kIndexOutOfRange The given face IDs are not on the mesh
MS::kInvalidParameter The collapse could not be completed successfully.
MS::kNotFound The given face list is empty

MS::kFailure An object error has occurred.

MS::kObjectDoesNotExist The base stucture was not initialized properly
MS::kShapeHasNoGeometry The mesh shape has no geometry to work on

Examples:

meshOpFtyAction.cpp.

MStatus MFnMesh::collapseEdges ( MIntArray & edgeList )

This function collapse edges into vertices. The two vertices that create each given edge are replaced in turn by one vertex placed at the average of the two initial vertex.

Parameters:

[in] edgeList array of edge component IDs to be collapsed

Returns:: Status Code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter One of the following parameter errors

MS::kIndexOutOfRange The given edge IDs are not on the mesh
MS::kInvalidParameter The collapse could not be completed successfully.
MS::kNotFound The given edge list is empty

MS::kFailure An object error has occurred.

MS::kObjectDoesNotExist The base stucture was not initialized properly
MS::kShapeHasNoGeometry The mesh shape has no geometry to work on

Examples:

meshOpFtyAction.cpp.

int MFnMesh::numVertices ( MStatus * ReturnStatus = NULL ) const

Returns the number of vertices in the vertex list for this mesh. This number will be the same as the length of the vertex array returned with the getPoints method.

Parameters:

[out] ReturnStatus Status code

Returns:: The number of vertices of the mesh

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

int MFnMesh::numEdges ( MStatus * ReturnStatus = NULL ) const

Returns the number of edges for this mesh.

Parameters:

[out] ReturnStatus Status code

Returns:: The number of edges for this mesh

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

int MFnMesh::numPolygons ( MStatus * ReturnStatus = NULL ) const

Returns the number of polygons for this mesh.

Parameters:

[out] ReturnStatus Status code

Returns:: The number of polygons for this mesh

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

int MFnMesh::numFaceVertices ( MStatus * ReturnStatus = NULL ) const

Returns the number of face-vertices for this mesh.

Parameters:

[out] ReturnStatus Status code

Returns:: The number of face-vertices for this mesh

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

int MFnMesh::polygonVertexCount	(	int	polygonId,
		MStatus *	ReturnStatus = `NULL`
	)			const

Returns the number of vertices for the specified polygon.

Parameters:

`[in]`	polygonId	The polygon index
`[out]`	ReturnStatus	Status code

Returns:: The number of vertices for the specified polygon

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

int MFnMesh::numUVs ( MStatus * ReturnStatus = NULL ) const

Returns the number of texture (uv) coordinates for this mesh. The uv's are stored in a list which is referenced by polygons requiring textures on a per-polygon per-vertex basis. This method returns the number of elements in this list.

Parameters:

[out] ReturnStatus Status code

Returns:: The number of texture coordinates

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

Examples:

splitUVFtyAction.cpp.

int MFnMesh::numUVs	(	const MString &	uvSet,
		MStatus *	ReturnStatus = `NULL`
	)			const

Returns the number of texture (uv) coordinates for this mesh. The uv's are stored in a list which is referenced by polygons requiring textures on a per-polygon per-vertex basis. This method returns the number of elements in this list.

Parameters:

`[in]`	uvSet	UV set to work with
`[out]`	ReturnStatus	Status code

Returns:: The number of texture coordinates

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

int MFnMesh::numColors ( MStatus * ReturnStatus = NULL ) const

Returns the number of (vertex) color for this mesh. The color are stored in a list which is referenced by polygons requiring color on a per-polygon per-vertex basis. This method returns the number of elements in this list.

Parameters:

[out] ReturnStatus Status code

Returns:: The number of colors

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

Examples:

meshReorderCmd.cpp.

int MFnMesh::numColors	(	const MString &	colorSet,
		MStatus *	ReturnStatus = `NULL`
	)			const

Returns the number of colors (vertex data) for this mesh. The colors are stored in a list which is referenced by polygons requiring textures on a per-polygon per-vertex basis. This method returns the number of elements in this list.

Parameters:

`[in]`	colorSet	Color set to work with
`[out]`	ReturnStatus	Status code

Returns:: The number of colors

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

int MFnMesh::numNormals ( MStatus * ReturnStatus = NULL ) const

Returns the number of per-polygon per-vertex normals for this mesh. This number will correspond to the length of the normal array returned by getNormals( normalArray, space ).

This method is not threadsafe.

Parameters:

[out] ReturnStatus Status code

Returns:: The number of per-polygon per-vertex normals

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

bool MFnMesh::hasColorChannels	(	const MString &	colorSet,
		MStatus *	ReturnStatus = `NULL`
	)			const

This method returns if the color set has RGB components.

Parameters:

`[in]`	colorSet	Color set to work with
`[out]`	ReturnStatus	Status code

Returns:

true The color set has RGB components
false The color set doesn't have RGB components

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

bool MFnMesh::hasAlphaChannels	(	const MString &	colorSet,
		MStatus *	ReturnStatus = `NULL`
	)			const

This method returns true if the color set has Alpha component.

Parameters:

`[in]`	colorSet	Color set to work with
`[out]`	ReturnStatus	Status code

Returns:

true The color set has Alpha component
false The color set doesn't have Alpha component

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MFnMesh::MColorRepresentation MFnMesh::getColorRepresentation	(	const MString &	colorSet,
		MStatus *	ReturnStatus = `NULL`
	)			const

This method returns the color representation (RGB/RGBA/A) of a color set.

Parameters:

`[in]`	colorSet	Color set to work with
`[out]`	ReturnStatus	Status code

Returns:

kAlpha The color set contains only Alpha component
kRGB The color set contains only RGB components
kRGBA The color set contains RGBA components

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure The color set doesn't exist

Examples:

meshReorderCmd.cpp.

bool MFnMesh::isColorClamped	(	const MString &	colorSet,
		MStatus *	ReturnStatus = `NULL`
	)			const

This method returns if the color set has its R,G,B,and A components clamped in the range from 0 to 1.

Parameters:

`[in]`	colorSet	Color set to work with
`[out]`	ReturnStatus	Status code

Returns:

true All components in the color set are clamped
false All components in the color set are not clamped

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

Examples:

meshReorderCmd.cpp.

MStatus MFnMesh::setIsColorClamped	(	const MString &	colorSet,
		bool	clamped
	)

Set the color set to be clamped.

Parameters:

`[in]`	colorSet	Color set to work with
`[in]`	clamped	If the color set should be set clamped

Returns:: If the operation is successful.

Status Codes:

true clamped.
false unclamped.

MStatus MFnMesh::getTriangles	(	MIntArray &	triangleCounts,
		MIntArray &	triangleVertices
	)			const

Returns the number of triangles for every polygon face and the vertex Ids of each triangle vertex. The triangleVertices array holds each vertex for each triangle in sequence, so is three times longer than the triangleCounts array

This method is not threadsafe.

Parameters:

`[out]`	triangleCounts	The number of triangles for each polygon face
`[out]`	triangleVertices	The triangle vertex Ids for each triangle

Returns:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::booleanOp	(	BoolOperation	op,
		MFnMesh &	mesh1,
		MFnMesh &	mesh2
	)

Computes the boolean between two meshes. The result is stored in the current MFnMesh instance. The current instance must point to a valid mesh, which can be empty. Such as mesh can result from using MFnMeshData::create() for example.

Parameters:

`[in]`	op	Operation to perform (kIntersection, kDifference or kUnion)
`[in]`	mesh1	The first mesh in the boolean operation
`[in]`	mesh2	The second mesh in the boolean operation

Returns:: Status Code

Status Codes:

MS::kFailure Mesh1, mesh2, this mesh is invalid, or the boolean operation failed.
MS::kSuccess Operation successful.

MMeshIsectAccelParams MFnMesh::uniformGridParams	(	int	xDiv,
		int	yDiv,
		int	zDiv
	)			`[static]`

Creates a MMeshIsectAccelParams configuration object to pass to the methods MFnMesh::closestIntersection(), MFnMesh::anyIntersection(), or MFnMesh::allIntersections(). This object specifies that a uniform voxel grid structure should be used by the intersection routines to speed up their operation. This object specifies the number of voxel cells to be used in the x, y, and z dimensions. The grid acceleration structure will be cached with the mesh, so that if the same MMeshIsectAccelParams configuration is used on the next intersect call, the acceleration structure will not need to be rebuilt.

To see details of the acceleration structure, including build time and memory usage, refer to the cachedIntersectionAcceleratorInfo() method.

Parameters:

`[in]`	xDiv	Number of voxels in the x direction
`[in]`	yDiv	Number of voxels in the y direction
`[in]`	zDiv	Number of voxels in the z direction

MMeshIsectAccelParams MFnMesh::autoUniformGridParams ( ) [static]

Creates a MMeshIsectAccelParams configuration object to pass to the methods MFnMesh::closestIntersection(), MFnMesh::anyIntersection(), or MFnMesh::allIntersections(). This object specifies that a uniform voxel grid structure should be used by the intersection routines to speed up their operation, and that the system should automatically determine the number of voxel cells to use based on the density of triangles in the mesh. The grid acceleration structure will be cached with the mesh, so that if the same MMeshIsectAccelParams configuration is used on the next intersect call, the acceleration structure will not need to be rebuilt.

To see details of the acceleration structure, including build time and memory usage, refer to the cachedIntersectionAcceleratorInfo() method.

Examples:

intersectCmd.cpp.

bool MFnMesh::closestIntersection	(	const MFloatPoint &	raySource,
		const MFloatVector &	rayDirection,
		const MIntArray *	faceIds,
		const MIntArray *	triIds,
		bool	idsSorted,
		MSpace::Space	space,
		float	maxParam,
		bool	testBothDirections,
		MMeshIsectAccelParams *	accelParams,
		MFloatPoint &	hitPoint,
		float *	hitRayParam,
		int *	hitFace,
		int *	hitTriangle,
		float *	hitBary1,
		float *	hitBary2,
		float	tolerance = `1e-6`,
		MStatus *	ReturnStatus = `NULL`
	)

Finds the closest intersection of a ray starting at raySource and travelling in rayDirection with the mesh. If faceIds is non-NULL and triIds is NULL, then only the faces specified by faceIds will be considered for intersection. If both faceIds and triIds are non-NULL, then each pair of entries will be taken as a (face,triangle) pair to be considered for intersection, where triangles are numbered on each face starting from 0. Thus, the face-triangle pair (10,0) means the first triangle on face 10. If both faceIds and triIds are NULL, then all face-triangles in the mesh will be considered.

The maxParam and testBothDirections flags can be used to control the radius of the search around the raySource point.

If accelParams is NULL, the search proceeds by testing all applicable face-triangles looking for intersections. If an MMeshIsectAccelParams structure is passed in via this parameter, the mesh builds an intersection acceleration structure based on the description provided by the parameter object. This acceleration structure is used to speed up the intersection operation, sometimes by a factor of several hundred over the non-accelerated case. Once created, the acceleration structure is cached, and will be reused the next time this method (or anyIntersection() or allIntersections()) is called with an identically-configured MMeshIsectAccelParams object. If a different MMeshIsectAccelParams object is used, then the acceleration structure will be deleted and re-created according to the new settings. Once created, the acceleration structure will persist until either the object is destroyed (or rebuilt by a construction history operation), or if the freeCachedIntersectionAccelerator() method is called. The cachedIntersectionAcceleratorInfo() and globalIntersectionAcceleratorsInfo() methods provide useful information about the resource usage of individual acceleration structures, and of all such structures in the system.

If the ray hits the mesh, the details of the closest intersection point to the raySource will be returned via the hitPoint, hitRayParam, hitFace, hitTriangle, hitBary1, and hitBary2 parameters. These parameters completely describe where the hit occurred.

Parameters:

`[in]`	raySource	Starting point for the ray
`[in]`	rayDirection	Direction of the ray
`[in]`	faceIds	(see above) if non-NULL, describes a subset of faces to consider for intersection.
`[in]`	triIds	(see above) if non-NULL, then along with faceIds describes a set of face-triangles to consider for intersection. If triIds is non-NULL, then faceIds must be non-NULL as well, otherwise an error will be generated.
`[in]`	idsSorted	should be true if the faceIds or faceIds/triIds arrays are properly sorted into ascending order. For face-triangle pairs, the arrays must be sorted by ascending face ids, then by ascending triangle ids within each face. The routine sortIntersectionFaceTriIds() can be used to perform this task. It is not important to sort ids unless an acceleration structure is being used. When using an acceleration structure in conjunction with a limited set of faces or face-triangles, it is ESSENTIAL to sort the indices, otherwise performance will be severely degraded.
`[in]`	space	specifies the space in which raySource and rayDirection are specified, as well as the space in which the hit point will be returned.
`[in]`	maxParam	specifies the maximum radius within which hits will be considered. This radius is specified as a multiple of the length of the rayDirection vector, so any hits beyond raySource+maxParam*rayDirection will not be considered. This value must be positive.
`[in]`	testBothDirections	specifies that hits in the negative rayDirection should also be considered. The maxParam value still applies to limit the search radius, which means that if testBothDirections is true, then only hits that lie between raySource-maxParamrayDirection and raySource+maxParamrayDirection will be considered.
`[out]`	hitPoint	receives the 3d coordinates of the closest intersection, in the space specified by the space parameter.
`[out]`	hitRayParam	if non-NULL, points to a value that will be filled in with the parametric distance along the ray to the hit point, if one was found. That is, hitPoint = raySource+(hitRayParam)rayDirection. If no hit was found, the referenced value will not be modified.
`[out]`	hitFace	if non-NULL, points to a value that will be filled in with the face id of the hit point, if one was found. If no hit was found, the referenced value will not be modified.
`[out]`	hitTriangle	if non-NULL, points to a value that will be filled in with the 0-based index of the triangle that was hit within the face given by *hitFace. If no hit was found, the referenced value will not be modified,
`[out]`	hitBary1	if non-NULL, points to a value that will be filled in with the first barycentric coordinate of the hit point within the triangle defined by hitFace and hitTriangle. If v1, v2, and v3 are the vertices of that triangle, then the barycentric coordinates are such that hitPoint = (hitBary1)v1 + (hitBary2)v2 + (1-hitBary1-hitBary2)v3; If no hit was found, the referenced value will not be modified,
`[out]`	hitBary2	if non-NULL, points to a value that will be filled in with the second barycentric coordinate of the hit point within the triangle defined by hitFace and *hitTriangle. If no hit was found, the referenced value will not be modified,
`[in]`	tolerance	numerical tolerance for the intersection operation. For numerical reasons, it is wise to allow the intersection routine to consider hits that lie a tiny bit outside mesh triangles. This parameter defines how close a ray has to be to hitting a triangle in order for a hit to register. Obviously, hits within the triangle are always considered, but we also consider hits that are up to a distance of tol*edgeLength away from the triangle, where "edgeLength" is the length of the edge of the triangle that is closest to the ray. This tolerance value is also used to collapse multiple nearly-identical hits that may arise due to numerical imprecision when a ray passes extremely close to a mesh vertex. Any two hits that are less than tol multiplied by the length of rayDirection apart will be considered the same hit, and treated interchangeably.
`[out]`	ReturnStatus	Status code

Returns:

true The given ray intersects the mesh, and the closest intersection of the ray with the mesh is given by the value returned in hitPoint.
false The given ray does not intersect this mesh

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter There was an error with the parameters passed to the method. Either MSpace::kWorld was specified for a mesh with no world-space transformation, or the mesh had no data, or triIds was non-NULL without a corresponding faceIds array.
MS::kFailure An object error has occurred.

bool MFnMesh::anyIntersection	(	const MFloatPoint &	raySource,
		const MFloatVector &	rayDirection,
		const MIntArray *	faceIds,
		const MIntArray *	triIds,
		bool	idsSorted,
		MSpace::Space	space,
		float	maxParam,
		bool	testBothDirections,
		MMeshIsectAccelParams *	accelParams,
		MFloatPoint &	hitPoint,
		float *	hitRayParam,
		int *	hitFace,
		int *	hitTriangle,
		float *	hitBary1,
		float *	hitBary2,
		float	tolerance = `1e-6`,
		MStatus *	ReturnStatus = `NULL`
	)

Finds any intersection of a ray starting at raySource and travelling in rayDirection with the mesh. If faceIds is non-NULL and triIds is NULL, then only the faces specified by faceIds will be considered for intersection. If both faceIds and triIds are non-NULL, then each pair of entries will be taken as a (face,triangle) pair to be considered for intersection, where triangles are numbered on each face starting from 0. Thus, the face-triangle pair (10,0) means the first triangle on face 10. If both faceIds and triIds are NULL, then all face-triangles in the mesh will be considered.

The maxParam and testBothDirections flags can be used to control the radius of the search around the raySource point.

If accelParams is NULL, the search proceeds by testing all applicable face-triangles looking for intersections. If an MMeshIsectAccelParams structure is passed in via this parameter, the mesh builds an intersection acceleration structure based on the description provided by the parameter object. This acceleration structure is used to speed up the intersection operation, sometimes by a factor of several hundred over the non-accelerated case. Once created, the acceleration structure is cached, and will be reused the next time this method (or closestIntersection() or allIntersections()) is called with an identically-configured MMeshIsectAccelParams object. If a different MMeshIsectAccelParams object is used, then the acceleration structure will be deleted and re-created according to the new settings. Once created, the acceleration structure will persist until either the object is destroyed (or rebuilt by a construction history operation), or if the freeCachedIntersectionAccelerator() method is called. The cachedIntersectionAcceleratorInfo() and globalIntersectionAcceleratorsInfo() methods provide useful information about the resource usage of individual acceleration structures, and of all such structures in the system.

If the ray hits the mesh, the details of the found intersection point to the raySource will be returned via the hitPoint, hitRayParam, hitFace, hitTriangle, hitBary1, and hitBary2 parameters. These parameters completely describe where the hit occurred.

Parameters:

`[in]`	raySource	Starting point for the ray
`[in]`	rayDirection	Direction of the ray
`[in]`	faceIds	(see above) if non-NULL, describes a subset of faces to consider for intersection.
`[in]`	triIds	(see above) if non-NULL, then along with faceIds describes a set of face-triangles to consider for intersection. If triIds is non-NULL, then faceIds must be non-NULL as well, otherwise an error will be generated.
`[in]`	idsSorted	should be true if the faceIds or faceIds/triIds arrays are properly sorted into ascending order. For face-triangle pairs, the arrays must be sorted by ascending face ids, then by ascending triangle ids within each face. The routine sortIntersectionFaceTriIds() can be used to perform this task. It is not important to sort ids unless an acceleration structure is being used. When using an acceleration structure in conjunction with a limited set of faces or face-triangles, it is ESSENTIAL to sort the indices, otherwise performance will be severely degraded.
`[in]`	space	specifies the space in which raySource and rayDirection are specified, as well as the space in which the hit point will be returned.
`[in]`	maxParam	specifies the maximum radius within which hits will be considered. This radius is specified as a multiple of the length of the rayDirection vector, so any hits beyond raySource+maxParam*rayDirection will not be considered. This value must be positive.
`[in]`	testBothDirections	specifies that hits in the negative rayDirection should also be considered. The maxParam value still applies to limit the search radius, which means that if testBothDirections is true, then only hits that lie between raySource-maxParamrayDirection and raySource+maxParamrayDirection will be considered.
`[out]`	hitPoint	receives the 3d coordinates of the intersection, in the space specified by the space parameter.
`[out]`	hitRayParam	if non-NULL, points to a value that will be filled in with the parametric distance along the ray to the hit point, if one was found. That is, hitPoint = raySource+(hitRayParam)rayDirection. If no hit was found, the referenced value will not be modified.
`[out]`	hitFace	if non-NULL, points to a value that will be filled in with the face id of the hit point, if one was found. If no hit was found, the referenced value will not be modified.
`[out]`	hitTriangle	if non-NULL, points to a value that will be filled in with the 0-based index of the triangle that was hit within the face given by *hitFace. If no hit was found, the referenced value will not be modified,
`[out]`	hitBary1	if non-NULL, points to a value that will be filled in with the first barycentric coordinate of the hit point within the triangle defined by hitFace and hitTriangle. If v1, v2, and v3 are the vertices of that triangle, then the barycentric coordinates are such that hitPoint = (hitBary1)v1 + (hitBary2)v2 + (1-hitBary1-hitBary2)v3; If no hit was found, the referenced value will not be modified,
`[out]`	hitBary2	if non-NULL, points to a value that will be filled in with the second barycentric coordinate of the hit point within the triangle defined by hitFace and *hitTriangle. If no hit was found, the referenced value will not be modified,
`[in]`	tolerance	numerical tolerance for the intersection operation. For numerical reasons, it is wise to allow the intersection routine to consider hits that lie a tiny bit outside mesh triangles. This parameter defines how close a ray has to be to hitting a triangle in order for a hit to register. Obviously, hits within the triangle are always considered, but we also consider hits that are up to a distance of tol*edgeLength away from the triangle, where "edgeLength" is the length of the edge of the triangle that is closest to the ray. This tolerance value is also used to collapse multiple nearly-identical hits that may arise due to numerical imprecision when a ray passes extremely close to a mesh vertex. Any two hits that are less than tol multiplied by the length of rayDirection apart will be considered the same hit, and treated interchangeably.
`[out]`	ReturnStatus	Status code

Returns:

true The given ray intersects the mesh, and the found intersection of the ray with the mesh is given by the value returned in hitPoint.
false The given ray does not intersect this mesh

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter There was an error with the parameters passed to the method. Either MSpace::kWorld was specified for a mesh with no world-space transformation, or the mesh had no data, or triIds was non-NULL without a corresponding faceIds array.
MS::kFailure An object error has occurred.

Examples:

intersectCmd.cpp.

bool MFnMesh::allIntersections	(	const MFloatPoint &	raySource,
		const MFloatVector &	rayDirection,
		const MIntArray *	faceIds,
		const MIntArray *	triIds,
		bool	idsSorted,
		MSpace::Space	space,
		float	maxParam,
		bool	testBothDirections,
		MMeshIsectAccelParams *	accelParams,
		bool	sortHits,
		MFloatPointArray &	hitPoints,
		MFloatArray *	hitRayParams,
		MIntArray *	hitFaces,
		MIntArray *	hitTriangles,
		MFloatArray *	hitBary1s,
		MFloatArray *	hitBary2s,
		float	tolerance = `1e-6`,
		MStatus *	ReturnStatus = `NULL`
	)

Finds all intersections of a ray starting at raySource and travelling in rayDirection with the mesh. If faceIds is non-NULL and triIds is NULL, then only the faces specified by faceIds will be considered for intersection. If both faceIds and triIds are non-NULL, then each pair of entries will be taken as a (face,triangle) pair to be considered for intersection, where triangles are numbered on each face starting from 0. Thus, the face-triangle pair (10,0) means the first triangle on face 10. If both faceIds and triIds are NULL, then all face-triangles in the mesh will be considered.

The maxParam and testBothDirections flags can be used to control the radius of the search around the raySource point.

If accelParams is NULL, the search proceeds by testing all applicable face-triangles looking for intersections. If an MMeshIsectAccelParams structure is passed in via this parameter, the mesh builds an intersection acceleration structure based on the description provided by the parameter object. This acceleration structure is used to speed up the intersection operation, sometimes by a factor of several hundred over the non-accelerated case. Once created, the acceleration structure is cached, and will be reused the next time this method (or anyIntersection() or allIntersections()) is called with an identically-configured MMeshIsectAccelParams object. If a different MMeshIsectAccelParams object is used, then the acceleration structure will be deleted and re-created according to the new settings. Once created, the acceleration structure will persist until either the object is destroyed (or rebuilt by a construction history operation), or if the freeCachedIntersectionAccelerator() method is called. The cachedIntersectionAcceleratorInfo() and globalIntersectionAcceleratorsInfo() methods provide useful information about the resource usage of individual acceleration structures, and of all such structures in the system.

If the ray hits the mesh, the details of the intersection points will be returned via the hitPoint, hitRayParam, hitFace, hitTriangle, hitBary1, and hitBary2 parameters. These parameters completely describe where the hit occurred.

Parameters:

`[in]`	raySource	Starting point for the ray
`[in]`	rayDirection	Direction of the ray
`[in]`	faceIds	(see above) if non-NULL, describes a subset of faces to consider for intersection.
`[in]`	triIds	(see above) if non-NULL, then along with faceIds describes a set of face-triangles to consider for intersection. If triIds is non-NULL, then faceIds must be non-NULL as well, otherwise an error will be generated.
`[in]`	idsSorted	should be true if the faceIds or faceIds/triIds arrays are properly sorted into ascending order. For face-triangle pairs, the arrays must be sorted by ascending face ids, then by ascending triangle ids within each face. The routine sortIntersectionFaceTriIds() can be used to perform this task. It is not important to sort ids unless an acceleration structure is being used. When using an acceleration structure in conjunction with a limited set of faces or face-triangles, it is ESSENTIAL to sort the indices, otherwise performance will be severely degraded.
`[in]`	space	specifies the space in which raySource and rayDirection are specified, as well as the space in which the hit point will be returned.
`[in]`	maxParam	specifies the maximum radius within which hits will be considered. This radius is specified as a multiple of the length of the rayDirection vector, so any hits beyond raySource+maxParam*rayDirection will not be considered. This value must be positive.
`[in]`	testBothDirections	specifies that hits in the negative rayDirection should also be considered. The maxParam value still applies to limit the search radius, which means that if testBothDirections is true, then only hits that lie between raySource-maxParamrayDirection and raySource+maxParamrayDirection will be considered.
`[in]`	sortHits	if true, then hits will be sorted in ascending ray-parametric order, so hits behind the raySource will be first (if testBothDirections is true), moving proceeding closer to the raySource, followed by hits in front of the raySource, proceeding by increasing distance from the raySource. If false, hits will be presented in no particular order in the return arrays.
`[out]`	hitPoints	an array that receives the 3d coordinates of the intersections, in the space specified by the space parameter.
`[out]`	hitRayParams	if non-NULL, points to an array that will be filled in with the parametric distances along the ray to the hit points, if any were found. That is, for the i'th hit, hitPoints[i] = raySource+(hitRayParams[i])rayDirection. If no hit was found, the referenced values will not be modified.
`[out]`	hitFaces	if non-NULL, points to an array that will be filled in with the face ids of the hit points, if any were found. If no hits were found, the referenced values will not be modified.
`[out]`	hitTriangles	if non-NULL, points to an array that will be filled in with the 0-based indices of the triangles that were hit within the faces given by *hitFaces. If no hits were found, the referenced values will not be modified,
`[out]`	hitBary1s	if non-NULL, points to an array that will be filled in with the first barycentric coordinates of the hit points within the triangles defined by hitFaces and hitTriangles. For the i'th hit, If v1, v2, and v3 are the vertices of that triangle, then the barycentric coordinates are such that hitPoint[i] = (hitBary1s)[i]v1 + (hitBary2s)[i]v2 + (1-(hitBary1s)[i]-(hitBary2s)[i])v3; If no hits were found, the referenced value will not be modified,
`[out]`	hitBary2s	if non-NULL, points to an array that will be filled in with the second barycentric coordinates of the hit points within the triangles defined by hitFaces and *hitTriangles. If no hits were found, the referenced values will not be modified,
`[in]`	tolerance	numerical tolerance for the intersection operation. For numerical reasons, it is wise to allow the intersection routine to consider hits that lie a tiny bit outside mesh triangles. This parameter defines how close a ray has to be to hitting a triangle in order for a hit to register. Obviously, hits within the triangle are always considered, but we also consider hits that are up to a distance of tol*edgeLength away from the triangle, where "edgeLength" is the length of the edge of the triangle that is closest to the ray. This tolerance value is also used to collapse multiple nearly-identical hits that may arise due to numerical imprecision when a ray passes extremely close to a mesh vertex. Any two hits that are less than tol multiplied by the length of rayDirection apart will be considered the same hit, and treated interchangeably.
`[out]`	ReturnStatus	Status code

Returns:

true The given ray intersects the mesh, and the intersections of the ray with the mesh are given by the values returned in hitPoints.
false The given ray does not intersect this mesh

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter There was an error with the parameters passed to the method. Either MSpace::kWorld was specified for a mesh with no world-space transformation, or the mesh had no data, or triIds was non-NULL without a corresponding faceIds array.
MS::kFailure An object error has occurred.

Examples:

intersectCmd.cpp.

MStatus MFnMesh::sortIntersectionFaceTriIds	(	MIntArray *	faceIds,
		MIntArray *	triIds
	)

Convenience routine for sorting faceIds or face/triangle ids before passing them into the closestIntersection(), allIntersections(), or anyIntersection() methods. When using an acceleration structure with the intersection operation, it is essential that any faceId or faceId/triId arrays be sorted properly to ensure optimal performance.

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::freeCachedIntersectionAccelerator ( )

If the mesh has a cached intersection accelerator structure, then this routine forces it to be deleted. Ordinarily, these structures are cached so that series of calls to the closestIntersection(), allIntersections(), and anyIntersection() method can reuse the same structure. Once the client is finished with these intersection operations, however, they are responsible for freeing the acceleration structure, which is what this method does.

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MString MFnMesh::cachedIntersectionAcceleratorInfo ( MStatus * ReturnStatus = NULL )

Retrieves a string that describes the intersection acceleration structure for this object, if any. The string is formatted similar to:

10x10x10 uniform grid, (build time 0.5s), (memory footprint 2000KB)

It describes the configuration of the cached intersection accelerator, as well as how long it took to build it, and how much memory it is currently occupying. If the mesh has no cached intersection accelerator, the empty string is returned.

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

Returns:: The description string

MString MFnMesh::globalIntersectionAcceleratorsInfo ( ) [static]

Retrieves a string that describes the systemwide resource usage for cached mesh intersection accelerators. The string will be formatted similar to:

total 10 accelerators created (2 currently active - total current memory = 10000KB), total build time = 10.2s, peak memory = 14567.1KB

This means that:

a total of 10 intersection accelerators have been created as instructed by calls to closestIntersection(), allIntersections(), or anyIntersection() with non-NULL accelParams values. These structures are destroyed and re-created when intersection requests with differing acceleration parameters are passed in for the same mesh, so it is useful to see this value, which is the total count of how many have been created. In this case, 8 of the 10 created have been destroyed, either automatically or via calls to the freeCachedIntersectionAccelerator() method

the total memory footprint for the 2 accelerators currently in existence is 10,000KB

the total build time for all 10 structures that have been created is 10.2 seconds

the peak of total memory usage for all accelerators in the system was 14567.1KB

Calling clearGlobalIntersectionAcceleratorInfo() will clear the "total count", "total build time", and "peak memory" fields from this information. It will not cause information about currently existing accelerators to be lost.

Returns:: The information string

void MFnMesh::clearGlobalIntersectionAcceleratorInfo ( ) [static]

As described above, clears the "total count", "total build time", and "peak memory" fields from the information string returned by globalIntersectionAcceleratorsInfo(). It will not cause information about currently existing accelerators to be lost.

bool MFnMesh::intersect	(	const MPoint &	raySource,
		const MVector &	rayDirection,
		MPointArray &	points,
		double	tolerance = `1.0e-10`,
		MSpace::Space	space = `MSpace::kObject`,
		MIntArray *	polygonIds = `NULL`,
		MStatus *	ReturnStatus = `NULL`
	)			const

Determines whether the given ray intersects this polygon and if so, returns the points of intersection. The points of intersection will be in order of closest point to the raySource.

If the polygonIds array is not NULL then it will contain the polygon id's that correspond to the points of intersection.

The tolerance parameter is the epsilon value that will be used in the point-in-polygon calculation.

This method is not threadsafe when invoked by multiple threads on the same object at the same time. It is threadsafe as long as each thread operates on a different mesh object.

Parameters:

`[in]`	raySource	Starting point for the ray
`[in]`	rayDirection	Direction of the ray
`[out]`	points	Storage for any points of intersection
`[in]`	tolerance	Tolerance used in intersection calculation
`[in]`	space	specifies the coordinate system for this operation
`[out]`	polygonIds	Storage for the polygon id's that correspond to the points of intersection.
`[out]`	ReturnStatus	Status code

Returns:

true The given ray intersects this polygon
false The given ray does not intersect this polygon

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter Cannot do world space transform.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getClosestPointAndNormal	(	const MPoint &	toThisPoint,
		MPoint &	theClosestPoint,
		MVector &	theNormal,
		MSpace::Space	space = `MSpace::kObject`,
		int *	closestPolygon = `NULL`
	)			const

Returns the closest point on this surface to the given point. This method also returns the surface normal at that point.

If world space is specified then the returned point and normal will be in world space. In this case The test point (toThisPoint) is assumed to be in world space.

This method is not threadsafe. For a threadsafe closest point implementation, use the MMeshIntersector class.

Parameters:

`[in]`	toThisPoint	Point to be compared
`[out]`	theClosestPoint	Storage for the closest point
`[out]`	theNormal	Storage for normal at the closest point
`[in]`	space	Specifies the coordinate system for this operation
`[out]`	closestPolygon	Storage for the closest polygon id

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter Cannot do world space operation.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getClosestPoint	(	const MPoint &	toThisPoint,
		MPoint &	theClosestPoint,
		MSpace::Space	space = `MSpace::kObject`,
		int *	closestPolygon = `NULL`
	)			const

Returns the closest point on this surface to the given point.

If world space is specified then the returned point will be in world space. In this case The test point (toThisPoint) is assumed to be in world space.

This method is not threadsafe. For a threadsafe closest point implementation, use the MMeshIntersector class.

Parameters:

`[in]`	toThisPoint	Point to be compared
`[out]`	theClosestPoint	Storage for the closest point
`[in]`	space	Specifies the coordinate system for this operation
`[out]`	closestPolygon	Storage for the closest polygon id

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter Cannot do world space operation.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getClosestNormal	(	const MPoint &	toThisPoint,
		MVector &	theNormal,
		MSpace::Space	space = `MSpace::kObject`,
		int *	closestPolygon = `NULL`
	)			const

Returns the closest point on this surface to the given point. This method also returns the surface normal at that point.

If world space is specified then the returned normal will be in world space. In this case The test point (toThisPoint) is assumed to be in world space.

Parameters:

`[in]`	toThisPoint	Point to be compared
`[out]`	theNormal	Storage for normal at the closest point
`[in]`	space	Specifies the coordinate system for this operation
`[out]`	closestPolygon	Storage for the closest polygon id

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter Cannot do world space operation.
MS::kFailure An object error has occurred.

Examples:

getPointAndNormal.cpp.

MStatus MFnMesh::getConnectedShaders	(	unsigned int	instanceNumber,
		MObjectArray &	shaders,
		MIntArray &	indices
	)			const

Returns all the shaders (sets) connected to the specified instance of this mesh. As well as an array of polygon/shader assignments. The indices array will hold for each polygon in the mesh, an index into the shaders array. If a polygon does not have a shader assigned to it, the value of the index will be -1.

The shader objects can be derived from the sets returned.

Note: This method will only work with a MFnMesh function set which has been initialized with an MFn::kMesh.

See also getConnectedSetsAndMembers.

Parameters:

`[in]`	instanceNumber	The instance number of the mesh to query
`[out]`	shaders	Storage for set objects (shader objects)
`[out]`	indices	Storage for indices matching faces to shaders. For each face, this array contains the index into the shaders array for the shader assigned to the face.

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getConnectedSetsAndMembers	(	unsigned int	instanceNumber,
		MObjectArray &	sets,
		MObjectArray &	comps,
		bool	renderableSetsOnly
	)			const

Returns all the sets connected to the specified instance of this mesh. For each set in the "sets" array there is a corresponding entry in the "comps" array which are all the components in that set. If the entire object is in a set, then the corresponding entry in the comps array will have no elements in it.

Note: This method will only work with a MFnMesh function set which has been initialized with an MFn::kMesh.

Parameters:

`[in]`	instanceNumber	The instance number of the mesh to query
`[out]`	sets	Storage for the sets
`[out]`	comps	Storage for the components that are in the corresponding set
`[in]`	renderableSetsOnly	If true then this method will only return renderable sets

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

Examples:

cleanPerFaceAssignmentCmd.cpp.

MObject MFnMesh::copy	(	const MObject &	source,
		MObject	parentOrOwner = `MObject::kNullObj`,
		MStatus *	ReturnStatus = `NULL`
	)

This method creates a copy of a given source mesh. After the copy this function set will operate on the new mesh.

The parentOrOwner argument is used to specify the owner of the new surface.

If the parentOrOwner is kMeshData then the created surface will be of type kMeshGeom and will be returned. The parentOrOwner will become the owner of the new mesh.

If parentOrOwner is NULL then a new transform will be created and returned which will be the parent for the mesh. The new transform will be added to the DAG.

If parentOrOwner is a DAG node then the new mesh will be returned and the parentOrOwner will become its parent.

Parameters:

`[in]`	source	the mesh to be copied
`[in]`	parentOrOwner	the DAG parent or kMeshData the new mesh will belong to
`[out]`	ReturnStatus	Status code

Returns:

If parentOrOwner is NULL then the transform for this surface is returned
If parentOrOwner is a DAG object then the new surface shape is returned
The surface geometry is returned if parentOrOwner is of type kMeshData

Status Codes:

MS::kSuccess The method was successful.
MS::kLicenseFailure Application not licensed for attempted operation
MS::kInvalidParameter One of the following parameter errors

parentOrOwner was not valid
if source object is not one of kMeshGeom, kMeshData, kMesh
dataMesh or underlying geometry was null
Source object was null
There was no model present to add the object to

MS::kFailure An object error has occurred.
MS::kInsufficientMemory Insufficient memory to complete this method

Examples:

testNobjectNode.cpp.

MStatus MFnMesh::updateSurface ( )

Signal that this polygonal mesh has changed and needs to redraw itself.

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

Examples:

polyPrimitiveCmd.cpp.

MStatus MFnMesh::syncObject ( )

If a non-api operation happens that many have changed the underlying Maya object wrapped by this api object, make sure that the api object references a valid maya object. In particular this call should be used if you are calling mel commands from your plugin. Note that this only applies for mesh shapes: in a plugin node where the dataMesh is being accessed directly this is not necessary.

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

const float * MFnMesh::getRawPoints ( MStatus * ReturnStatus ) const

This method returns a pointer to the internal vertex list for this mesh. The points are in local space.

The points are stored in a single contiguous array of floats, first by coordinate, then by element (xyzxyz...) There are three coordinate values, so each vertex is stored in 12 bytes of data, and the total array length is 12*numVertices() bytes.

This method is useful where performance is critical or memory resources are limited, as it avoids having to make a copy of the points as is done by getVertices. Care must be taken however as the returned pointer may become invalid if any changes are made to the mesh.

Returns:: Pointer to internal vertex list data structure

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

const float * MFnMesh::getRawNormals ( MStatus * ReturnStatus ) const

This method returns a pointer to the internal normal list for this mesh. The normals are in local space and are the per-polygon per-vertex normals. To find the normal for a particular vertex-face, use getFaceNormalIds() or MItMeshPolygon::normalIndex to get the index into the array.

The normals are stored in a single contiguous array of floats, first by coordinate, then by element (xyzxyz...) There are three coordinate values, so each normal is stored in 12 bytes of data, and the total array length is 12*numNormals() bytes.

This method is useful where performance is critical or memory resources are limited, as it avoids having to make a copy of the normals as is done by getNormals. Care must be taken however as the returned pointer may become invalid if any changes are made to the mesh.

This method is not threadsafe.

Returns:: Pointer to internal per-polygon per-vertex normal data structure

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getPoints	(	MFloatPointArray &	vertexArray,
		MSpace::Space	space = `MSpace::kObject`
	)			const

This method copies the vertex list for this mesh into the given point array.

Parameters:

`[out]`	vertexArray	Storage for the vertex list
`[in]`	space	Specifies the coordinate system for this operation

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter Cannot do world space operation.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getPoints	(	MPointArray &	vertexArray,
		MSpace::Space	space = `MSpace::kObject`
	)			const

This method copies the vertex list for this mesh into the given point array.

Parameters:

`[out]`	vertexArray	Storage for the vertex list
`[in]`	space	Specifies the coordinate system for this operation

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter Cannot do world space operation.
MS::kFailure An object error has occurred.

MStatus MFnMesh::setPoints	(	MFloatPointArray &	vertexArray,
		MSpace::Space	space = `MSpace::kObject`
	)

This method copies the points in the given point array to the vertices of this polygon.

Parameters:

`[out]`	vertexArray	Storage for the vertex list
`[in]`	space	Specifies the coordinate system for this operation

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter Cannot do world space operation.
MS::kFailure An object error has occurred.

Examples:

testNobjectNode.cpp.

MStatus MFnMesh::setPoints	(	MPointArray &	vertexArray,
		MSpace::Space	space = `MSpace::kObject`
	)

This method copies the points in the given point array to the vertices of this mesh.

Parameters:

`[in]`	vertexArray	Storage for the vertex list
`[in]`	space	Specifies the coordinate system for this operation

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter Cannot do world space operation.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getVertices	(	MIntArray &	vertexCount,
		MIntArray &	vertexList
	)			const

This method retrieves the object-relative (mesh-relative/global) vertex indices for all polygons. The indices refer to the elements in the array returned by the 'getPoints' method.

Parameters:

`[out]`	vertexCount	Vertex count per polygon
`[out]`	vertexList	Storage for the vertex list. NOTE: Global (mesh-relative/object-relative) vertex indices are returned.

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getPolygonVertices	(	int	polygonId,
		MIntArray &	vertexList
	)			const

This method retrieves the object-relative (mesh-relative/global) vertex indices for the specified polygon. The indices refer to the elements in the array returned by the 'getPoints' method.

Parameters:

`[in]`	polygonId	The polygon to examine
`[out]`	vertexList	Storage for the vertex list. NOTE: Global (mesh-relative/object-relative) vertex indices are returned.

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

Examples:

meshOpFtyAction.cpp, and objExport.cpp.

MStatus MFnMesh::getPolygonTriangleVertices	(	int	polygonId,
		int	triangleId,
		int	vertexList[3]
	)			const

This method retrieves the object-relative (mesh-relative/global) vertex indices for the specified triangle in the specified polygon. The indices refer to the elements in the array returned by the 'getPoints' method.

This method is not threadsafe.

Parameters:

`[in]`	polygonId	The polygon to examine
`[in]`	triangleId	The triangle within the polygon to examine (numbered from zero)
`[out]`	vertexList	Storage for the vertex list. NOTE: Global (mesh-relative/object-relative) vertex indices are returned.

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::setPoint	(	int	vertexId,
		const MPoint &	pos,
		MSpace::Space	space = `MSpace::kObject`
	)

Sets the position of specified vertex in the vertex list for this mesh.

Note that if you modify the position of a vertex for a shape, a tweak will be created. If you have a shape with no history, the first time that a tweak is created, the underlying pointers under the MFnMesh object may change. You will need to call syncObject() to make sure that the object is valid. Subsequent calls to setPoint() on the same object do not require a syncObject call.

Parameters:

`[in]`	vertexId	The object-relative (mesh-relative/global) index of the vertex to be changed
`[in]`	pos	The new value for the vertex
`[in]`	space	Specifies the coordinate system for this operation

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter Cannot do world space operation.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getPoint	(	int	vertexId,
		MPoint &	pos,
		MSpace::Space	space = `MSpace::kObject`
	)			const

Get the position of the specified vertex in this mesh's vertex list.

Parameters:

`[in]`	vertexId	The object-relative (mesh-relative/global) index of the vertex to retrieve
`[out]`	pos	Storage for the vertex
`[in]`	space	Specifies the coordinate system for this operation

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter Cannot do world space operation.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getNormals	(	MFloatVectorArray &	normals,
		MSpace::Space	space = `MSpace::kObject`
	)			const

This method copies the normal list for this mesh into the given array. The normals are the per-polygon per-vertex normals. To find the normal for a particular vertex-face, use getFaceNormalIds() or MItMeshPolygon::normalIndex to get the index into the array.

This method is not threadsafe.

Parameters:

`[out]`	normals	Storage for the per-polygon per-vertex normal list
`[in]`	space	Specifies the coordinate system for this operation

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter Cannot do world space operation.
MS::kFailure An object error has occurred.

MStatus MFnMesh::setNormals	(	MFloatVectorArray &	normals,
		MSpace::Space	space = `MSpace::kObject`
	)

Set the normal array (user normals)

Parameters:

`[in]`	normals	The normal array to set
`[in]`	space	World space or Object space

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getFaceVertexNormal	(	int	faceIndex,
		int	vertexIndex,
		MVector &	normal,
		MSpace::Space	space = `MSpace::kObject`
	)			const

Return a per-vertex-per-face normal for a given face (polygon) and given vertex.

This method is not threadsafe.

Parameters:

`[in]`	faceIndex	Index of the face of interest
`[in]`	vertexIndex	The object-relative (mesh-relative/global) vertex index
`[out]`	normal	Storage for the per-polygon-per-vertex normal
`[in]`	space	Specifies the coordinate system for this operation

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter Cannot do world space operation.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getFaceVertexNormals	(	int	faceIndex,
		MFloatVectorArray &	normals,
		MSpace::Space	space = `MSpace::kObject`
	)			const

Return all per-vertex-per-face normals for a given face.

This method is not threadsafe.

Parameters:

`[in]`	faceIndex	Index of the face (polygon) for which to retrive the normals
`[out]`	normals	Storage for the face normals
`[in]`	space	Specifies the coordinate system for this operation

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter Cannot do world space operation.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getNormalIds	(	MIntArray &	normalCounts,
		MIntArray &	normals
	)			const

Return normal indices for all vertices for a all faces. The normalIds can be used to index into an array returned by MFnMesh::getNormals();

This method is not threadsafe.

Parameters:

`[out]`	normalCounts	Number of normals for each face
`[out]`	normals	Storage for the per-polygon normal ids

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter Cannot do world space operation.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getFaceNormalIds	(	int	faceIndex,
		MIntArray &	normals
	)			const

Return normal indices for all vertices for a given face. The normalIds can be used to index into an array returned by MFnMesh::getNormals();

This method is not threadsafe.

Parameters:

`[in]`	faceIndex	Index of face (polygon) of interest
`[out]`	normals	Storage for the per-polygon normal ids

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter Cannot do world space operation.
MS::kFailure An object error has occurred.

MStatus MFnMesh::setFaceVertexNormal	(	MVector &	normalIn,
		int	faceId,
		int	vertexId,
		MSpace::Space	space = `MSpace::kObject`,
		MDGModifier *	modifier = `NULL`
	)

Set Normal for this face/vertex pair

Parameters:

`[in]`	normalIn	The normal to set
`[in]`	faceId	The face to set it for
`[in]`	vertexId	The object-relative (mesh-relative/global) vertex index to set it for
`[in]`	space	World space or Object space
`[in]`	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::setVertexNormal	(	MVector &	normalIn,
		int	vertexId,
		MSpace::Space	space = `MSpace::kObject`,
		MDGModifier *	modifier = `NULL`
	)

Set Shared Normal for this vertex

Parameters:

`[in]`	normalIn	The normal to set
`[in]`	vertexId	The object-relative (mesh-relative/global) vertex index to set it for
`[in]`	space	World space or Object space
`[in]`	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::setFaceVertexNormals	(	MVectorArray &	normalsIn,
		MIntArray &	faceList,
		MIntArray &	vertexList,
		MSpace::Space	space = `MSpace::kObject`
	)

Set Normals for the given face/vertex pairs. Note that if there is a vertex-face mismatch anywhere in the list, this method will return an error, and not set any of the normals.

Parameters:

`[in]`	normalsIn	The normals to set
`[in]`	faceList	The faces to set them for
`[in]`	vertexList	The object-relative (mesh-relative/global) vertex indices to set them for
`[in]`	space	World space or Object space

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::setVertexNormals	(	MVectorArray &	normalsIn,
		MIntArray &	vertexList,
		MSpace::Space	space = `MSpace::kObject`
	)

Set Shared Normals for these vertices. The length of the normalsIn array should be same as the length of the vertexList array.

Parameters:

`[in]`	normalsIn	The normals to set
`[in]`	vertexList	The object-relative (mesh-relative/global) vertex indices to set them for
`[in]`	space	World space or Object space

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getVertexNormal	(	int	vertexId,
		MVector &	normal,
		MSpace::Space	space = `MSpace::kObject`
	)			const

This method is obsolete.

Deprecated:: Use getVertexNormal(int, bool, MVector&, MSpace::Space) instead.

Return the normal at the given vertex. The returned normal is a single per-vertex normal, so unshared normals at a vertex will be averaged. See the class description for more information on normals.

This method is not threadsafe.

Parameters:

`[in]`	vertexId	The object-relative (mesh-relative/global) vertex index to get the normal for
`[out]`	normal	Storage for the per-vertex normal
`[in]`	space	Specifies the coordinate system for this operation

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter Cannot do world space operation.
MS::kFailure An object error has occurred.

Examples:

meshOpFtyAction.cpp.

MStatus MFnMesh::getVertexNormal	(	int	vertexId,
		bool	angleWeighted,
		MVector &	normal,
		MSpace::Space	space = `MSpace::kObject`
	)			const

Return the normal at the given vertex. The returned normal is a single per-vertex normal, so unshared normals at a vertex will be averaged. See the class description for more information on normals.

If angleWeighted is set to true, the normals are computed by an average of surrounding face normals weighted by the angle subtended by the face at the vertex. If angleWeighted is set to false, a simple average of surround face normals is returned.

The simple average evaluation is significantly faster than the angle-weighted average.

This method is not threadsafe.

Parameters:

`[in]`	vertexId	The object-relative (mesh-relative/global) vertex index to get the normal for
`[in]`	angleWeighted	Defines algorithm used to compute normal
`[out]`	normal	Storage for the per-vertex normal
`[in]`	space	Specifies the coordinate system for this operation

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter Cannot do world space operation.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getVertexNormals	(	bool	angleWeighted,
		MFloatVectorArray &	normals,
		MSpace::Space	space = `MSpace::kObject`
	)			const

Return all vertex normals. The returned normals are per-vertex normals, so unshared normals at a vertex will be averaged. See the class description for more information on normals.

If angleWeighted is set to true, the normals are computed by an average of surrounding face normals weighted by the angle subtended by the face at the vertex. If angleWeighted is set to false, a simple average of surround face normals is returned.

The simple average evaluation is significantly faster than the angle-weighted average.

This method is not threadsafe.

Parameters:

`[in]`	angleWeighted	Defines algorithm used to compute normal
`[out]`	normals	Storage for the per-vertex normals
`[in]`	space	Specifies the coordinate system for this operation

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter Cannot do world space operation.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getPolygonNormal	(	int	polygonId,
		MVector &	normal,
		MSpace::Space	space = `MSpace::kObject`
	)			const

Return the normal at the given polygon. The returned normal is a per-polygon normal. See the class description for more information on normals.

This method is not threadsafe.

Parameters:

`[in]`	polygonId	The polygon (face) to get the normal for
`[out]`	normal	Storage for the per-polygon normal
`[in]`	space	Specifies the coordinate system for this operation

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter Cannot do world space operation.
MS::kFailure An object error has occurred.

bool MFnMesh::isNormalLocked	(	int	normalId,
		MStatus *	ReturnStatus = `NULL`
	)			const

Test if the normal for a face/vertex pairs is locked (user defined).

MStatus MFnMesh::lockVertexNormals ( MIntArray & vertexList )

Lock Shared Normals for these vertices.

Parameters:

[in] vertexList The object-relative (global) verticex ides to lock normals for

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::lockFaceVertexNormals	(	MIntArray &	faceList,
		MIntArray &	vertexList
	)

Lock Normals for these face/vertex pairs

Parameters:

`[in]`	faceList	The faces to lock normal in
`[in]`	vertexList	The corresponding object-relative (global) vertex indices to lock them for

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::unlockVertexNormals ( MIntArray & vertexList )

Unlock Shared Normals for these vertices

Parameters:

[in] vertexList The vertices to unlock normals for

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::unlockFaceVertexNormals	(	MIntArray &	faceList,
		MIntArray &	vertexList
	)

Unlock Normals for these face/vertex pairs

Parameters:

`[in]`	faceList	The faces to unlock normal in
`[in]`	vertexList	The corresponding object-relative (global) vertex indices to unlock them for

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

int MFnMesh::getTangentId	(	int	faceIndex,
		int	vertexIndex,
		MStatus *	ReturnStatus = `NULL`
	)			const

Return the tangent index for a given face vertex.

Parameters:

`[in]`	faceIndex	Index of the face of interest.
`[in]`	vertexIndex	The object-relative (mesh-relative/global) vertex index.
`[out]`	ReturnStatus	Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter Cannot invalid face or vertex index.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getTangents	(	MFloatVectorArray &	tangents,
		MSpace::Space	space = `MSpace::kObject`,
		const MString *	uvSet = `NULL`
	)			const

Return the tangent vectors for all face vertices. The tangent is defined as the surface tangent of the polygon running in the U direction defined by the uv map.

This method is not threadsafe.

Parameters:

`[out]`	tangents	Storage for the tangents.
`[in]`	space	Specifies the coordinate system for this operation.
`[in]`	uvSet	The uv map set to calculate the tangents against.

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter Cannot do world space operation.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getFaceVertexTangent	(	int	faceIndex,
		int	vertexIndex,
		MVector &	tangent,
		MSpace::Space	space = `MSpace::kObject`,
		const MString *	uvSet = `NULL`
	)			const

Return the normalized tangent vector at a given face vertex.

This method is not threadsafe.

Parameters:

`[in]`	faceIndex	Index of the face of interest.
`[in]`	vertexIndex	The object-relative (mesh-relative/global) vertex index.
`[out]`	tangent	Storage for the tangent.
`[in]`	space	Specifies the coordinate system for this operation.
`[in]`	uvSet	The uv map set to calculate the binormals aginst.

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter Cannot do world space operation.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getFaceVertexTangents	(	int	faceIndex,
		MFloatVectorArray &	tangents,
		MSpace::Space	space = `MSpace::kObject`,
		const MString *	uvSet = `NULL`
	)			const

Return all per-vertex-per-face tangents for a given face.

This method is not threadsafe.

Parameters:

`[in]`	faceIndex	Index of the face (polygon) for which to retrive the tangents
`[out]`	tangents	Storage for the face tangents
`[in]`	space	Specifies the coordinate system for this operation

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter Cannot do world space operation.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getBinormals	(	MFloatVectorArray &	binormals,
		MSpace::Space	space = `MSpace::kObject`,
		const MString *	uvSet = `NULL`
	)			const

Return the binormal vectors for all face vertices.

This method is not threadsafe.

Parameters:

`[out]`	binormals	Storage for the binormals.
`[in]`	space	Specifies the coordinate system for this operation.
`[in]`	uvSet	The uv map set to calculate the binormals aginst.

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter Cannot do world space operation.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getFaceVertexBinormal	(	int	faceIndex,
		int	vertexIndex,
		MVector &	binormal,
		MSpace::Space	space = `MSpace::kObject`,
		const MString *	uvSet = `NULL`
	)			const

Return the binormal vector at a given face vertex.

This method is not threadsafe.

Parameters:

`[in]`	faceIndex	Index of the face of interest
`[in]`	vertexIndex	The object-relative (mesh-relative/global) vertex index
`[out]`	binormal	Storage for the binormal.
`[in]`	space	Specifies the coordinate system for this operation.
`[in]`	uvSet	The uv map set to calculate the binormals aginst.

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter Cannot do world space operation.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getFaceVertexBinormals	(	int	faceIndex,
		MFloatVectorArray &	binormals,
		MSpace::Space	space = `MSpace::kObject`,
		const MString *	uvSet = `NULL`
	)			const

Return all per-vertex-per-face binormals for a given face.

This method is not threadsafe.

Parameters:

`[in]`	faceIndex	Index of the face (polygon) for which to retrive the binormals
`[out]`	binormals	Storage for the face binormals
`[in]`	space	Specifies the coordinate system for this operation

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter Cannot do world space operation.
MS::kFailure An object error has occurred.

bool MFnMesh::isPolygonConvex	(	int	faceIndex,
		MStatus *	ReturnStatus = `NULL`
	)			const

This method determines if the specified polygon is convex.

Parameters:

`[in]`	faceIndex	The polygon to be tested
`[out]`	ReturnStatus	Status code

Returns:

true The polygon is convex
false The edge is concave

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getEdgeVertices	(	int	edgeId,
		int2 &	vertexList
	)			const

This method retrieves the object-relative (mesh-relative/global) vertex indices corresponding to the specified edge. The indices can be used to refer to the elements in the array returned by the 'getPoints' method.

Parameters:

`[in]`	edgeId	The edge to get the vertices for
`[out]`	vertexList	Storage for the 2 object-relative vertex indices

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

Examples:

meshOpFtyAction.cpp.

bool MFnMesh::isEdgeSmooth	(	int	edgeId,
		MStatus *	ReturnStatus = `NULL`
	)			const

This method determines if the specified edge is smooth (soft).

Parameters:

`[in]`	edgeId	The edge to be tested
`[out]`	ReturnStatus	Status code

Returns:

true The edge is smooth (soft)
false The edge is hard

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::setEdgeSmoothing	(	int	edgeId,
		bool	smooth = `true`
	)

This method sets the specified edge to be hard or smooth (soft). You must use the cleanupEdgeSmoothing method after all the desired edges on your mesh have had setEdgeSmoothing done. Use the updateSurface method to indicate the mesh needs to be redrawn.

Parameters:

`[in]`	edgeId	The edge to set the smoothing information for
`[in]`	smooth	If true the edge will be smooth (soft), otherwise the edge will be hard.

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::cleanupEdgeSmoothing ( )

This method updates the mesh after setEdgeSmoothing has been done. This should be called only once, after all the desired edges have been had their soothing set. If you don't call this method, the normals may not be correct, and the object will look odd in shaded mode.

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getCreaseEdges	(	MUintArray &	edgeIds,
		MDoubleArray &	creaseData
	)			const

This method returns the crease edges of the mesh, and also the crease data associated with those edges.

Please note that to make effective use of the creasing variable in software outside of Maya may require a license under patents owned by Pixar(R).

Parameters:

`[out]`	edgeIds	The list of crease edges ids.
`[out]`	creaseData	The data related to the crease edges.

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::setCreaseEdges	(	const MUintArray &	edgeIds,
		const MDoubleArray &	creaseData
	)

This method sets the specified edges of the mesh as crease edges.

Please note that to make effective use of the creasing variable in software outside of Maya may require a license under patents owned by Pixar(R).

Parameters:

`[in]`	edgeIds	The list of crease edges ids.
`[in]`	creaseData	The data related to the crease edges.

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MUintArray MFnMesh::getInvisibleFaces ( MStatus * ReturnStatus = NULL ) const

This method returns the invisible faces of the mesh.

Invisible faces are like lightweight holes in that they are not rendered but do not require additional geometry the way that holes do. They have the advantage over holes that if the mesh is smoothed then their edges will be smoothed as well, while holes will retain their hard edges.

Invisible faces can be set using the setInvisibleFaces() method or the polyHole command.

Parameters:

[out] ReturnStatus status code

Returns:: The list of invisible face ids.

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::setInvisibleFaces	(	const MUintArray &	faceIds,
		bool	makeVisible = `false`
	)

This method sets the specified faces of the mesh to be visible or invisible. See the getInvisibleFaces() method for a description of invisible faces.

Parameters:

`[in]`	faceIds	The list of face ids to be made visible/invisible.
`[in]`	makeVisible	If true the faces will be made visible. The default is false, which will make them invisible.

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getCreaseVertices	(	MUintArray &	vertexIds,
		MDoubleArray &	creaseData
	)			const

This method returns the crease vertices of the mesh, and also the crease data associated with those vertices.

Please note that to make effective use of the creasing variable in software outside of Maya may require a license under patents owned by Pixar(R).

Parameters:

`[out]`	vertexIds	The list of crease vertices ids.
`[out]`	creaseData	The data related to the crease vertices.

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::setCreaseVertices	(	const MUintArray &	vertexIds,
		const MDoubleArray &	creaseData
	)

This method sets the specified vertices of the mesh as crease vertices.

Please note that to make effective use of the creasing variable in software outside of Maya may require a license under patents owned by Pixar(R).

Parameters:

`[in]`	vertexIds	The list of crease vertices ids.
`[in]`	creaseData	The data related to the crease vertices.

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

int MFnMesh::numUVSets ( MStatus * ReturnStatus = NULL ) const

Returns the number of uv sets for an object.

Parameters:

[out] ReturnStatus return status value

Returns:: The number of uv sets for the object

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MString MFnMesh::createUVSetWithName	(	const MString &	uvSetName,
		MDGModifier *	modifier = `NULL`,
		MStatus *	ReturnStatus = `NULL`,
		const MUintArray *	instances = `NULL`
	)

Create a new empty uv set for this mesh. If the name passed in is empty (zero length), or a uv set with the same name already exists, then a new unique name is generated and used as the new uvset's name.

In the case where the name is empty, the new name will be of the format "uvSet#" where # is a number that makes the name unique for this mesh.

In the case where a uvset already exists with the same name as the name passed in, then the new name will be of the format "userName#", where "userName" was the name specified, and # is a number appended on to "userName" to make the name unique for this mesh.

This operation will only work when the MFnMesh refers to a shape.

Parameters:

`[in]`	uvSetName	The name of the uv set to add. If a new name needed to be generated then the new name will be returned by the function.
`[in]`	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.
`[out]`	ReturnStatus	Status code. See below.
`[in]`	instances	The instance number(s) for which the set should be added, or NULL if the uv-set should be shared by all instances.

Returns:: The name used for the UV set. May be different then the given name if a new name needed to be generated.

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MString MFnMesh::copyUVSetWithName	(	const MString &	fromName,
		const MString &	toName,
		MDGModifier *	modifier = `NULL`,
		MStatus *	ReturnStatus = `NULL`
	)

Copies a uv set from one to another for this mesh. The source must exist. The following cases can occur:

1) If the destination name is the same as the source than no copy will be made. 2) If the destination name exists a copy will be made to the destination. 3) If the destination name does not exist, then a new uv set will be created with a unique name, and then the copy will be made. The name generated will be "destinationName>#", where "destinationName" is the original name sent in, and "#" is a ascending number appended to the end of the original name.

This operation will only work when the MFnMesh refers to a shape.

Parameters:

`[in]`	fromName	The name of the uv set to change
`[in]`	toName	The name to set the uv set to.
`[out]`	ReturnStatus	Status Code. See below.
`[in]`	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.

Returns:: The name of the new UV set. May be different then the name passed in if a new name was generated.

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::renameUVSet	(	const MString &	origName,
		const MString &	newName,
		MDGModifier *	modifier = `NULL`
	)

Renames a uv set from one name to another for this mesh. The original name must exist, and the new name cannot be the same name as one that already exists. In these cases the uv set will not be renamed.

This operation will only work when the MFnMesh refers to a shape.

Parameters:

`[in]`	origName	The name of the uv set to change
`[in]`	newName	The name to set the uv set to.
`[in]`	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::deleteUVSet	(	const MString &	setName,
		MDGModifier *	modifier = `NULL`,
		MSelectionList *	currentSelection = `NULL`
	)

Deletes a named uv set from the object. If a uv set with the given name cannot be found, then no uv set will be deleted.

This operation only works when the MFnMesh refers to a shape.

Parameters:

`[in]`	setName	Name of the uv set to delete
`[in]`	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.
`[in]`	currentSelection	Since this method may change the selection list, if you wish to undo its effects, you need to keep track of the current active selection. If this selection list is non-null, then the active selection list will be returned in this argument.

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

Examples:

meshReorderCmd.cpp.

MStatus MFnMesh::setCurrentUVSetName	(	const MString &	setName,
		MDGModifier *	modifier = `NULL`,
		MSelectionList *	currentSelection = `NULL`
	)

Set the "current" uv set for this object. The "current" uv set is the uv set to use when no uv set name is specified for a uv set operation. If the uv set does not exist then the "current" uv set will not be changed.

This operation only works when the MFnMesh is a shape.

Parameters:

`[in]`	setName	Name of uv set to make "current"
`[in]`	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.
`[in]`	currentSelection	Since this method may change the selection list, if you wish to undo its effects, you need to keep track of the current active selection. If this selection list is non-null, then the active selection list will be returned in this argument.

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MString MFnMesh::currentUVSetName	(	MStatus *	ReturnStatus = `NULL`,
		int	instance = `-1`
	)			const

Get the name of the "current" uv set. The "current" uv set is the uv set which is used for uv operations when no uv set is explicitly specified.

On instanced meshes, uv sets may be applied on a per-instance basis or may be shared across all instances. When the uv sets are per-instance, the concept of the current uv set has two levels of granularity. Namely, the current uv set applies to one or more instances, plus there are other uv sets in the same uv set family that apply to different instances. The instance arguement is used to indicate that if this is a per-instance uv set, you are interested in the name of the uv set that applies to the specified instance. When the index is not specified, the current uv set will be returned regardless of which instance it is for.

If there is no current uv set, then a empty string will be returned on the string argument passed in.

Parameters:

`[out]`	ReturnStatus	Status code
`[in]`	instance	Instance of the mesh whose set we are interested in

Returns:: UV set name.

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getUVSetNames ( MStringArray & setNames ) const

Get the names of all of the uv sets on this object.

Parameters:

[out] setNames Array of uv set names found

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

Examples:

meshReorderCmd.cpp.

MStatus MFnMesh::getUVSetFamilyNames ( MStringArray & familyNames ) const

Get the names of all of the uv set families on this object. A uv set family is a set of per-instance sets with the same name with each individual set applying to one or more instances. A set which is shared across all instances will be the sole member of its family.

Given a uv set family name, the method getUVSetsInFamily may be used to determine the names of the associated individual sets.

Parameters:

[out] familyNames Array of uv set names found

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getUVSetsInFamily	(	const MString &	familyName,
		MStringArray &	setNames
	)			const

Get the names of the uv sets that belong to this set family. Per-instance sets will have multiple sets in a family, with each individual set applying to one or more instances. A set which is shared across all instances will be the sole member of its family and will share the same name as its family.

Parameters:

`[in]`	familyName	The uv set family name
`[out]`	setNames	Array of uv set names in the family

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

bool MFnMesh::isUVSetPerInstance	(	const MString &	name,
		MStatus *	ReturnStatus = `NULL`
	)			const

Return true if this set is per-instance, and false if it is shared across all instances. The name provided may be an individual set name or a set family name.

Parameters:

`[in]`	name	The set name or set family name
`[out]`	ReturnStatus	Status code

Returns:: true if the set is per-instance

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getFaceUVSetNames	(	int	polygonId,
		MStringArray &	setNames
	)			const

This method returns the list of UV sets mapped to a face.

This method is not threadsafe.

Parameters:

`[in]`	polygonId	The polygon ID of the face of interest
`[out]`	setNames	The string array to return the UV sets names in

Returns:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred or an internal error.

MStatus MFnMesh::getAssociatedUVSetTextures	(	const MString	uvSetName,
		MObjectArray &	textures
	)			const

Get a list of texture nodes which are using a given uv set. If the texture has a 2d texture placement, the texture, and not the placement will be returned.

Parameters:

`[in]`	uvSetName	Name of uv set to use
`[out]`	textures	Texture nodes using the uv set

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getAssociatedUVSetInstances	(	const MString &	uvSetName,
		MIntArray &	instances
	)			const

Get a list of the instance numbers associated with this uv map. If the uv map is shared across all instances, an empty array will be returned.

Note, this method may only be used on an MFnMesh that is initialized using a mesh shape. It will return failure if used on an MFnMesh that has no associated shape.

Parameters:

`[in]`	uvSetName	Name of uv set to use
`[out]`	instances	Instances associated with this uv set

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred or the name does not exist

MStatus MFnMesh::setUVs	(	const MFloatArray &	uArray,
		const MFloatArray &	vArray,
		const MString *	uvSet = `NULL`
	)

Sets all of the texture coordinates (uv's) for this mesh. The uv arrays must be of equal size and must be at least as large as the current UV set size. You can determine the UV set size by calling numUVs() for the default UV set, or numUVs(uvSet) for a named UV set.

If the arrays are larger than the UV set size, then the uv list for this mesh will be grown to accommodate the new uv values.

After using this method to set the UV values, you must call one of the assignUV methods to assign the corresponding UV ids to the geometry.

In order to shrink the uvs array, do the following:

These steps will let you to create an array of uvs which is smaller than the original one.

Parameters:

`[in]`	uArray	The array of u values to be set
`[in]`	vArray	The array of v values to be set
`[in]`	uvSet	UV set to work with

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter uArray and vArray lengths do not match or the arrays are smaller than the number of UVs in the set.
MS::kFailure An object error has occurred.

Examples:

meshReorderCmd.cpp.

MStatus MFnMesh::setSomeUVs	(	const MIntArray &	uvIds,
		const MFloatArray &	uArray,
		const MFloatArray &	vArray,
		const MString *	uvSet = `NULL`
	)

Sets the specified texture coordinates (UV's) for this mesh. The uv arrays and uvId array must be of equal size. If the largest uvId in the array is larger than numUVs() then the uv list for this mesh will be grown to accommodate the new uv values. If a named uv set is given, the array will be grown when the largest uvId is larger than numUVs(uvSet).

If you have added new uvIds, you must call one of the assignUV methods to assign the uvIds to the geometry. If you are modifying existing UVs, you do not need to call one of the assignUV methods.

Parameters:

`[in]`	uvIds	The array of uvIds to set values for
`[in]`	uArray	The array of u values to be set
`[in]`	vArray	The array of v values to be set
`[in]`	uvSet	UV set to work with

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter uArray and vArray lengths do not match or the arrays are smaller than numUVs().
MS::kFailure An object error has occurred.

MStatus MFnMesh::getUVs	(	MFloatArray &	uArray,
		MFloatArray &	vArray,
		const MString *	uvSet = `NULL`
	)			const

This method copies the texture coordinate list for this mesh into the given uv arrays.

Parameters:

`[out]`	uArray	Storage for the u texture coordinate list
`[out]`	vArray	Storage for the v texture coordinate list
`[in]`	uvSet	UV set to work with

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

Examples:

meshReorderCmd.cpp.

MStatus MFnMesh::setUV	(	int	uvId,
		float	u,
		float	v,
		const MString *	uvSet = `NULL`
	)

Sets the specified texture coordinate. The uvId is the element in the uv list that will be set. If the uvId is greater than or equal to numUVs() then the uv list will be grown to accommodate the specified uv. If a named uv set is given, the largest uvId must be larger than numUVs(uvSet).

If the UV being added is new, then you must call one of the assignUV methods in order to update the geometry.

Parameters:

`[in]`	uvId	The element in the uv list to be set
`[in]`	u	The new u value that is to be set
`[in]`	v	The new v value that is to be set
`[in]`	uvSet	UV set to work with

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

Examples:

splitUVFtyAction.cpp.

MStatus MFnMesh::getUV	(	int	uvId,
		float &	u,
		float &	v,
		const MString *	uvSet = `NULL`
	)			const

Get the value of the specified texture coordinate from this mesh's uv list. The uvId is the element in the uv list that will be retrieved.

Parameters:

`[in]`	uvId	The element in the uv list to examine
`[out]`	u	Storage for the u value
`[out]`	v	Storage for the v value
`[in]`	uvSet	UV set to work with

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter Invalid uvId. The uvId should be less than numUVs() or numUVs(uvSet).
MS::kFailure An object error has occurred.

Examples:

splitUVFtyAction.cpp.

MStatus MFnMesh::getPointAtUV	(	int	polygonId,
		MPoint &	toThisPoint,
		float2 &	uvPoint,
		MSpace::Space	space = `MSpace::kObject`,
		const MString *	uvSet = `NULL`,
		float	tolerance = `0.0`
	)

Return the position of the point at the given UV value in the current polygon.

This method is not threadsafe.

Parameters:

`[in]`	polygonId	Search for uv on this face
`[out]`	toThisPoint	Space for the point
`[in]`	uvPoint	The UV value to try to locate
`[in]`	space	The coordinate system to return "toThisPoint" in
`[in]`	uvSet	UV set to work with
`[in]`	tolerance	tolerance value to compare float data type

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getUVAtPoint	(	MPoint &	pt,
		float2 &	uvPoint,
		MSpace::Space	space = `MSpace::kObject`,
		const MString *	uvSet = `NULL`,
		int *	closestPolygon = `NULL`
	)

Find the point closet to the given point, and return the UV value at that point.

This method is not threadsafe.

Parameters:

`[in]`	pt	The point to try to get UV for
`[out]`	uvPoint	Space for the UV value
`[in]`	space	The coordinate system for this operation
`[in]`	uvSet	UV set to work with
`[in]`	closestPolygon	polygon id of the closest polygon

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getPolygonUV	(	int	polygonId,
		int	vertexIndex,
		float &	u,
		float &	v,
		const MString *	uvSet = `NULL`
	)			const

Get the value of the specified texture coordinate for a vertex in a polygon. Since texture coordinates (uv's) are stored per-polygon per-vertex you must specify both the polygon and the vertex that the u and v values are mapped to.

This method is not threadsafe.

Parameters:

`[in]`	polygonId	The polygon (face) to examine
`[in]`	vertexIndex	The face-relative (local) vertex id to examine
`[out]`	u	Storage for the u value
`[out]`	v	Storage for the v value
`[in]`	uvSet	UV set to work with

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter Invalid polygonId or vertexIndex specified.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getPolygonUVid	(	int	polygonId,
		int	vertexIndex,
		int &	uvId,
		const MString *	uvSet = `NULL`
	)			const

Get the id of the specified texture coordinate for a vertex in a polygon.

This method is not threadsafe.

Parameters:

`[in]`	polygonId	The polygon (face) to examine
`[in]`	vertexIndex	The face-relative (local) vertex id to examine
`[out]`	uvId	Storage for the uv index
`[in]`	uvSet	UV set to work with

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter Invalid polygonId or vertexIndex specified.
MS::kFailure An object error has occurred.

MStatus MFnMesh::assignUV	(	int	polygonId,
		int	vertexIndex,
		int	uvId,
		const MString *	uvSet = `NULL`
	)

Maps a texture coordinate to a specified vertex of a polygon.

Since texture coordinates (uv's) are stored per-polygon per-vertex you must specify both the polygon and the vertex that the uv entry is mapped to.

The vertexIndex (face-relative/local) is the vertex within the polygon that the uv will be mapped to. This index must be in the range 0 to polygonVertexCount(polygonId).

Parameters:

`[in]`	polygonId	The polygon (face) to map to
`[in]`	vertexIndex	The face-relative (local) vertex id of the polygon to map to
`[in]`	uvId	The uv entry from the uv list that will be mapped
`[in]`	uvSet	UV set to work with

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter Invalid polygonId, vertexIndex, or uvId specified.
MS::kFailure An object error has occurred.

Examples:

meshReorderCmd.cpp, and splitUVFtyAction.cpp.

MStatus MFnMesh::assignUVs	(	const MIntArray &	uvCounts,
		const MIntArray &	uvIds,
		const MString *	uvSet = `NULL`
	)

This method maps all texture coordinates for the mesh. The setUV/setUVs method is used to create the texture coordinate table for the mesh. After the table is created, this method is used to map those values to each polygon on a per-vertex basis. The setUV/setUVs method should be called before the assignUVs method.

The uvCounts array should contain the number of uv's per polygon. Since uv's are mapped per-polygon per-vertex, the entries in this array should match the vertex counts for each polygon in the mesh. For example, the array for a cube would be { 4, 4, 4, 4, 4, 4 } since there are 6 polygons each with 4 vertices.

If an entry in this array is '0' then the corresponding polygon will not be mapped. The sum of all the entries in the uvCounts array must be equal to the size of the uvIds array or this method will fail.

The uvIds array should contain the UV indices that will be mapped to each polygon-vertex in the mesh. The entries in this array specify which uv's in the mesh's uv table are mapped to each polygon-vertex. Each entry in the uvIds array must be less than numUVs(), or numUVs(uvSet) for a named uvSet. The size of the uvIds array is equivalent to adding up all of the entries in the uvCounts array, so for a cube with all polygons mapped there would be 24 entries.

Parameters:

`[in]`	uvCounts	The uv counts for each polygon (face) in the mesh
`[in]`	uvIds	The uv indices to be mapped to each polygon-vertex
`[in]`	uvSet	UV set to work with

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter Invalid uvCounts array or invalid uvIds array.
MS::kFailure An object error has occurred.

MStatus MFnMesh::clearUVs ( const MString * uvSet = NULL )

This method clears out all texture coordinates for the mesh, and leaves behind an empty UVset.

This method should be used if it is needed to shrink the actual size of the UV table. In this case, the user should call clearUVs, setUVs and then assignUVs to rebuild the mapping info.

When called on a dataMesh, the UVs are removed. When called on a shape with no history, the UVs are removed and the attributes are set on the shape. When called on a shape with history, the polyMapDel command is invoked and a polyMapDel node is created.

Parameters:

[in] uvSet UV set to work with

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter Invalid uvCounts array or invalid uvIds array.
MS::kInvalidIndex Invalid uvSet was specified
MS::kFailure An object error has occurred.

MStatus MFnMesh::getAssignedUVs	(	MIntArray &	uvCounts,
		MIntArray &	uvIds,
		const MString *	uvSet = `NULL`
	)			const

Get assigned UVs. This method finds all texture coordinates for the mesh that have been mapped, and returns them in the same format as the assignUVs.

The uvCounts array that is returned will contain the number of uv's per polygon. Since uv's are mapped per-polygon per-vertex, the entries in this array will match the vertex counts for each polygon in the mesh. For example, the array for a cube would be { 4, 4, 4, 4, 4, 4 } since there are 6 polygons each with 4 vertices.

The uvIds array will contain the UV indices that are mapped to each polygon-vertex in the mesh. The entries in this array indicate which uv's in the mesh's uv table are mapped to each polygon-vertex. Each entry in the uvIds array will be less than numUVs(), or numUVs(uvSet) for a named uvSet. The size of the uvIds array is equivalent to adding up all of the entries in the uvCounts array, so for a cube with all polygons mapped there will be 24 entries.

This method is not threadsafe.

Parameters:

`[out]`	uvCounts	The container for the uv counts for each polygon in the mesh
`[out]`	uvIds	The container for the uv indices mapped to each polygon-vertex
`[in]`	uvSet	UV set to work with

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter Invalid uvCounts array or invalid uvIds array.
MS::kFailure An object error has occurred.

Examples:

meshReorderCmd.cpp.

MStatus MFnMesh::getUvShellsIds	(	MIntArray &	uvShellIds,
		unsigned int &	nbUvShells,
		const MString *	uvSet = `NULL`
	)			const

Constructs an array of unique integer for each UV shell. This method let the user identify each connected piece of UV.

The uvShellIds array that is returned will contain a UV shell number for each UV in the given UV set. This number uniquely identifies a connected piece in the UV set. Numbers are positive, starting at 0.

For example, the array { 0, 0, 0, 1, 1, 1, 1, 0} would represent an object where UVs 0, 1, 2 and 7 are connected together (UV shell number 0), and UVs 3 to 6 belong to shell number 1.

Parameters:

`[out]`	uvShellIds	The container for the uv shell Ids
`[out]`	nbUvShells	The number of UV shells in this UV set.
`[in]`	uvSet	UV set to work with

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

int MFnMesh::numColorSets ( MStatus * ReturnStatus = NULL ) const

Returns the number of color sets for an object.

Parameters:

[out] ReturnStatus return status value

Returns:: The number of color sets for the object

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MString MFnMesh::createColorSetWithName	(	const MString &	colorSetName,
		MDGModifier *	modifier = `NULL`,
		const MUintArray *	instances = `NULL`,
		MStatus *	ReturnStatus = `NULL`
	)

Create a new empty color set for this mesh. If the name passed in is empty (zero length), or a color set with the same name already exists, then a new unique name is generated and used as the new color set's name.

In the case where the name is empty, the new name will be of the format "colorSet#" where # is a number that makes the name unique for this mesh.

In the case where a color set already exists with the same name as the name passed in, then the new name will be of the format "userName#", where "userName" was the name specified, and # is a number appended on to "userName" to make the name unique for this mesh.

This operation will only work when the MFnMesh refers to a shape.

Parameters:

`[in]`	colorSetName	The name of the color set to add.
`[in]`	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.
`[in]`	instances	The instance number(s) for which the set should be added, or NULL if the uv-set should be shared by all instances.
`[in]`	ReturnStatus	Status code. See below.

Returns:: The resulting name of the color set.

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::deleteColorSet	(	const MString &	colorSetName,
		MDGModifier *	modifier = `NULL`,
		MSelectionList *	currentSelection = `NULL`
	)

Deletes a named color set from the object. If a color set with the given name cannot be found, then no color set will be deleted.

This operation only works when the MFnMesh refers to a shape.

Parameters:

`[in]`	colorSetName	Name of the color set to delete
`[in]`	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.
`[in]`	currentSelection	Since this method may change the selection list, if you wish to undo its effects, you need to keep track of the current active selection. If this selection list is non-null, then the active selection list will be returned in this argument.

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

Examples:

meshReorderCmd.cpp.

MStatus MFnMesh::setCurrentColorSetName	(	const MString &	setName,
		MDGModifier *	modifier = `NULL`,
		MSelectionList *	currentSelection = `NULL`
	)

Set the "current" or "working" color set for this object. The "current" color set is the set to use by functions that do not have a specific color set defined.

This operation only works when the MFnMesh is a shape.

Parameters:

`[in]`	setName	Name of color set to make "current"
`[in]`	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.
`[in]`	currentSelection	Since this method may change the selection list, if you wish to undo its effects, you need to keep track of the current active selection. If this selection list is non-null, then the active selection list will be returned in this argument.

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MString MFnMesh::currentColorSetName	(	int	instance = `-1`,
		MStatus *	ReturnStatus = `NULL`
	)			const

Get the name of the "current" or "working" color set. The "current" color set is the color set which is used for color operations when no color set is explcitly specified.

If there is no current color set, then a empty string will be returned on the string argument passed on.

On instanced meshes, color sets may be applied on a per-instance basis or may be shared across all instances. When the color sets are per-instance, the concept of the current color set has two levels of granularity. Namely, the current color set applies to one or more instances, plus there are other color sets in the same color set family that apply to different instances. The instance arguement is used to indicate that if this is a per-instance color set, you are interested in the name of the color set that applies to the specified instance. When the index is not specified, the current color set will be returned regardless of which instance it is for.

Parameters:

[out] ReturnStatus Status code. See below.

Returns:

Name of the "current" color set, if any.
instance Instance of the mesh whose set we are interested in

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getColorSetNames ( MStringArray & setNames ) const

Get the names of all of the colors sets on this object.

Parameters:

[out] setNames Array of color set names found

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getColorSetFamilyNames ( MStringArray & familyNames ) const

Get the names of all of the color set families on this object. A color set family is a set of per-instance sets with the same name with each individual set applying to one or more instances. A set which is shared across all instances will be the sole member of its family.

Given a color set family name, the method getColorSetsInFamily may be used to determine the names of the associated individual sets.

Parameters:

[out] familyNames Array of color set names found

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getColorSetsInFamily	(	const MString &	familyName,
		MStringArray &	setNames
	)			const

Get the names of the color sets that belong to this set family. Per-instance sets will have multiple sets in a family, with each individual set applying to one or more instances. A set which is shared across all instances will be the sole member of its family and will share the same name as its family.

Parameters:

`[out]`	familyName	The color set family name
`[out]`	setNames	Array of color set names in the family

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

bool MFnMesh::isColorSetPerInstance	(	const MString &	name,
		MStatus *	ReturnStatus = `NULL`
	)			const

Return true if this color set is per-instance, and false if it is shared across all instances. The name provided may be an individual set name or a set family name.

Parameters:

`[in]`	name	The set name or set family name
`[out]`	ReturnStatus	Status code

Returns:: true if the set is per-instance

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getAssociatedColorSetInstances	(	const MString &	colorSetName,
		MIntArray &	instances
	)			const

Get a list of the instance numbers associated with this color map. If the color map is shared across all instances, an empty array will be returned.

Note, this method may only be used on an MFnMesh that is initialized using a mesh shape. It will return failure if used on an MFnMesh that has no associated shape.

Parameters:

`[in]`	colorSetName	Name of color set to use
`[out]`	instances	Instances associated with this color set

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred or the name does not exist

MStatus MFnMesh::setFaceColor	(	MColor &	color,
		int	faceIndex
	)

Set vertex-face Color for all vertices on this face.

Parameters:

`[in]`	color	The color to set
`[in]`	faceIndex	The face to set it for

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::setFaceColor	(	MColor &	color,
		int	faceIndex,
		MColorRepresentation	rep
	)

Set vertex-face Color of specified channels for all vertices on this face.

Parameters:

`[in]`	color	The color to set
`[in]`	faceIndex	The face to set it for
`[in]`	rep	The RGB/RGBA/A channel(s) to set

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::setVertexColor	(	MColor &	color,
		int	vertexIndex,
		MDGModifier *	modifier = `NULL`
	)

Set color for this vertex. The color is set for the vertex-face in each face that the vertex belongs to.

NOTE: To change the colors of many vertices, it is more efficient to use the batch updating method setVertexColors() instead.

Parameters:

`[in]`	color	The color to set
`[in]`	vertexIndex	The object-relative (mesh-relative/global) vertex index to set it for
`[in]`	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::setVertexColor	(	MColor &	color,
		int	vertexIndex,
		MDGModifier *	modifier,
		MColorRepresentation	rep
	)

Set color of specified channels for this vertex. The color is set for the vertex-face in each face that the vertex belongs to.

NOTE: To change the colors of many vertices, it is more efficient to use the batch updating method setVertexColors() instead.

Parameters:

`[in]`	color	The color to set
`[in]`	vertexIndex	The object-relative (mesh-relative/global) vertex index to set it for
`[in]`	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.
`[in]`	rep	The RGB/RGBA/A channel(s) to set

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::setFaceVertexColor	(	MColor &	color,
		int	faceIndex,
		int	vertexIndex,
		MDGModifier *	modifier = `NULL`
	)

Set color for this vertex in this face.

Parameters:

`[in]`	color	The color to set
`[in]`	faceIndex	The face to set it for
`[in]`	vertexIndex	The object-relative (mesh_relative/global) vertex index to set it for
`[in]`	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::setFaceVertexColor	(	MColor &	color,
		int	faceIndex,
		int	vertexIndex,
		MDGModifier *	modifier,
		MColorRepresentation	rep
	)

Set color of specified channels for this vertex in this face.

Parameters:

`[in]`	color	The color to set
`[in]`	faceIndex	The face to set it for
`[in]`	vertexIndex	The object-relative (mesh_relative/global) vertex index to set it for
`[in]`	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.
`[in]`	rep	The RGB/RGBA/A channel(s) to set

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::setFaceVertexColor	(	int	faceIndex,
		int	localVertexIndex,
		MColor &	color,
		MDGModifier *	modifier = `NULL`
	)

Set color for this vertex in this face.

Parameters:

`[in]`	faceIndex	The face to set it for
`[in]`	localVertexIndex	The face-relative (local) vertex index to set it for
`[in]`	color	The color to set
`[in]`	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::setFaceVertexColor	(	int	faceIndex,
		int	localVertexIndex,
		MColor &	color,
		MDGModifier *	modifier,
		MColorRepresentation	rep
	)

Set color of specified channels for this vertex in this face.

Parameters:

`[in]`	faceIndex	The face to set it for
`[in]`	localVertexIndex	The face-relative (local) vertex index to set it for
`[in]`	color	The color to set
`[in]`	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.
`[in]`	rep	The RGB/RGBA/A channel(s) to set

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::setFaceColors	(	MColorArray &	colors,
		MIntArray &	faceList
	)

Set color for these faces. The color will be set for each vertex-face component of a face.

Parameters:

`[in]`	colors	The colors to set
`[in]`	faceList	The faces to set it for

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::setFaceColors	(	MColorArray &	colors,
		MIntArray &	faceList,
		MColorRepresentation	rep
	)

Set color of specified channels for these faces. The color will be set for each vertex-face component of a face.

Parameters:

`[in]`	colors	The colors to set
`[in]`	faceList	The faces to set it for
`[in]`	rep	The RGB/RGBA/A channel(s) to set

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::setVertexColors	(	MColorArray &	colors,
		MIntArray &	vertexList,
		MDGModifier *	modifier = `NULL`
	)

Set color for these vertices.

Parameters:

`[in]`	colors	The colors to set
`[in]`	vertexList	The vertices to set it for

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

Examples:

meshReorderCmd.cpp.

MStatus MFnMesh::setVertexColors	(	MColorArray &	colors,
		MIntArray &	vertexList,
		MDGModifier *	modifier,
		MColorRepresentation	rep
	)

Set color of specified channels for these vertices.

Parameters:

`[in]`	colors	The colors to set
`[in]`	vertexList	The vertices to set it for
`[in]`	rep	The RGB/RGBA/A channel(s) to set

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::setFaceVertexColors	(	MColorArray &	colors,
		MIntArray &	faceList,
		MIntArray &	vertexList,
		MDGModifier *	modifier = `NULL`
	)

Set colors for these face/vertex pairs.

Parameters:

`[in]`	colors	The colors to set
`[in]`	faceList	The faces to set it for
`[in]`	vertexList	The object-relative (mesh-relative/global) vertex indices to set it for

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::setFaceVertexColors	(	MColorArray &	colors,
		MIntArray &	faceList,
		MIntArray &	vertexList,
		MDGModifier *	modifier,
		MColorRepresentation	rep
	)

Set colors of specified channels for these face/vertex pairs.

Parameters:

`[in]`	colors	The colors to set
`[in]`	faceList	The faces to set it for
`[in]`	vertexList	The object-relative (mesh-relative/global) vertex indices to set it for
`[in]`	rep	The RGB/RGBA/A channel(s) to set

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::removeFaceColors ( MIntArray & faceList )

Remove previously set color these faces. For each face, the color will be unset for each vertex-face component in the face.

Parameters:

[in] faceList The faces to remove color from

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::removeVertexColors ( MIntArray & vertexList )

Remove color from these vertices.

Parameters:

[in] vertexList The object-relative (mesh-relative/global) vertex indices to remove color from

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::removeFaceVertexColors	(	MIntArray &	faceList,
		MIntArray &	vertexList
	)

Remove colors for these face/vertex pairs

Parameters:

`[in]`	faceList	The faces to remove color for
`[in]`	vertexList	The corresponding object-relative (mesh-relative/global) vertex indices to remove color for

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getVertexColors	(	MColorArray &	colors,
		const MString *	colorSet = `NULL`,
		const MColor *	defaultUnsetColor = `NULL`
	)

Get colors for all Vertices of the given colorSet. If the colorSet is not specified, the default color set will be used. If no vertex/face has color for that vertex, the entry returned will be defaultUnsetColor. If the defaultUnsetColor is not given, then (-1, -1, -1, -1) will be used. If a color was set for some or all the faces for that vertex, an average of those verted/face values where the color has been set will be returned.

Parameters:

`[out]`	colors	Storage for the colors to be returned.
`[in]`	colorSet	Color set name
`[in]`	defaultUnsetColor	Default Unset color

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

Examples:

meshReorderCmd.cpp.

MStatus MFnMesh::getFaceVertexColors	(	MColorArray &	colors,
		const MString *	colorSet = `NULL`,
		const MColor *	defaultUnsetColor = `NULL`
	)

Get colors for all vertex/faces of the given color set. If the color set is not specified, the default color set will be used. If no vertex/face has color for that vertex, the entry returned will be defaultUnsetColor. If defaultUnsetColor is not given, then (-1, -1, -1, -1) will be used. If a color was set for some but not all the faces for that vertex, the ones where the color has not been explicitly set will have (0,0,0). If a vertex has shared color, the same value will be set for all its vertes/faces.

The colors are returned in face order: e.g. F0V0, F0V1.. F0Vn, F1V0, etc... Use the index returned by getFaceVertexColorIndex if you wish to index directly into the returned color array.

This method is not threadsafe.

Parameters:

`[out]`	colors	Storage for the colors to be returned.
`[in]`	colorSet	Color set name
`[in]`	defaultUnsetColor	Default unset color

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getFaceVertexColorIndex	(	int	faceIndex,
		int	localVertexIndex,
		int &	colorIndex,
		const MString *	colorSet = `NULL`
	)

Get an index into the array returned by getFaceVertexColors. So that you can index into the array directly, instead of walking it in face-vertex order.

Parameters:

`[in]`	faceIndex	The face to look for
`[in]`	localVertexIndex	The face-relative (local) vertex id to look for
`[out]`	colorIndex	Storage for the color index to be returned.

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::setColors	(	const MColorArray &	colorArray,
		const MString *	colorSet = `NULL`
	)

Sets all of the colors for this mesh. The color array must be at least as large as the current color set size. You can determine the color set size by calling numColors() for the default color set, or numColors(colorSet) for a named color set.

If the array is larger than the color set size, then the color list for this mesh will be grown to accommodate the new color values.

After using this method to set the color values, you can call assignColors to assign the corresponding color ids to the geometry.

In order to shrink the color array, do the following:

These steps will let you to create an array of colors which is smaller than the original one.

Parameters:

`[in]`	colorArray	The array of color values to be set
`[in]`	colorSet	The color set to work with

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter The colorArray length is smaller than the number of colors in the set.
MS::kFailure An object error has occurred.

Examples:

meshReorderCmd.cpp.

MStatus MFnMesh::setColors	(	const MColorArray &	colorArray,
		const MString *	colorSet,
		MColorRepresentation	rep
	)

Sets all of the colors of specified channels for this mesh. The color array must be at least as large as the current color set size. You can determine the color set size by calling numColors() for the default color set, or numColors(colorSet) for a named color set.

If the array is larger than the color set size, then the color list for this mesh will be grown to accommodate the new color values.

After using this method to set the color values, you can call assignColors to assign the corresponding color ids to the geometry.

In order to shrink the color array, do the following:

These steps will let you to create an array of colors which is smaller than the original one.

Parameters:

`[in]`	colorArray	The array of color values to be set
`[in]`	colorSet	The color set to work with
`[in]`	rep	The RGB/RGBA/A channel(s) to set

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter The colorArray length is smaller than the number of colors in the set.
MS::kFailure An object error has occurred.

MStatus MFnMesh::setSomeColors	(	const MIntArray &	colorIds,
		const MColorArray &	colorArray,
		const MString *	colorSet = `NULL`
	)

Sets the specified colors for this mesh. If the largest colorId in the array is larger than numColors() then the color list for this mesh will be grown to accommodate the new color values.

If you have added new colorIds, you can call assignColors to assign the colorIds to the geometry. If you are modifying existing colors, they will already be referenced by the existing mesh data.

Parameters:

`[in]`	colorIds	The array of colorIds to set values for
`[in]`	colorArray	The array of color values to be set
`[in]`	colorSet	Color set to work with

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter colorArray lengths do not match or the arrays are smaller than numColors().
MS::kFailure An object error has occurred.

MStatus MFnMesh::setSomeColors	(	const MIntArray &	colorIds,
		const MColorArray &	colorArray,
		const MString *	colorSet,
		MColorRepresentation	rep
	)

Sets the specified colors of specified channels for this mesh.

If the largest colorId in the array is larger than numColors() then the color list for this mesh will be grown to accommodate the new color values.

If you have added new colorIds, you can call assignColors to assign the colorIds to the geometry. If you are modifying existing colors, they will already be referenced by the existing mesh data.

Parameters:

`[in]`	colorIds	The array of colorIds to set values for
`[in]`	colorArray	The array of color values to be set
`[in]`	colorSet	Color set to work with
`[in]`	rep	The RGB/RGBA/A channel(s) to set

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter colorArray lengths do not match or the arrays are smaller than numColors().
MS::kFailure An object error has occurred.

MStatus MFnMesh::getColors	(	MColorArray &	colorArray,
		const MString *	colorSet = `NULL`,
		const MColor *	defaultUnsetColor = `NULL`
	)			const

This method copies the color array for this mesh into the given color array. Use the index returned by getColorIndex to access the array. If the color is not set for a vertex, defaultUnsetColor will be return. If defaultUnsetColor is not set, (0,0,0,1) will be return.

Parameters:

`[out]`	colorArray	Storage for the color values list
`[in]`	colorSet	Color set to work with
`[in]`	defaultUnsetColor	Default unset color

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

Examples:

meshReorderCmd.cpp.

MStatus MFnMesh::getColorIndex	(	int	faceIndex,
		int	localVertexIndex,
		int &	colorIndex,
		const MString *	colorSet = `NULL`
	)

Get an index into the array returned by getColors.

Parameters:

`[in]`	faceIndex	The face to look for
`[in]`	localVertexIndex	The face-relative (local) vertex id to look for
`[out]`	colorIndex	Storage for the color index to be returned.

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful. If no color exists for faceIndex/localVertexIndex, then the colorIndex will return -1.
MS::kFailure An object error has occurred.

Examples:

meshReorderCmd.cpp.

MStatus MFnMesh::setColor	(	int	colorId,
		const MColor &	color,
		const MString *	colorSet = `NULL`
	)

Sets the specified color values. The colorId is the element in the color list that will be set. If the colorId is greater than or equal to numColors() then the color list will be grown to accommodate the specified color.

Parameters:

`[in]`	colorId	The element in the color list to be set
`[in]`	color	The new color value that is to be set
`[in]`	colorSet	Color set to work with

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::setColor	(	int	colorId,
		const MColor &	color,
		const MString *	colorSet,
		MColorRepresentation	rep
	)

Sets the specified color values of specified channels. The colorId is the element in the color list that will be set. If the colorId is greater than or equal to numColors() then the color list will be grown to accommodate the specified color.

Parameters:

`[in]`	colorId	The element in the color list to be set
`[in]`	color	The new color value that is to be set
`[in]`	colorSet	Color set to work with
`[in]`	rep	The RGB/RGBA/A channel(s) to set

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getColor	(	int	colorId,
		MColor &	color,
		const MString *	colorSet = `NULL`,
		const MColor *	defaultUnsetColor = `NULL`
	)			const

Get the value of the specified texture coordinate from this mesh's color list. The colorId is the element in the color list that will be retrieved. If the color is not set, defaultUnsetColor will be return. If defaultUnsetColor is not set, (0,0,0,1) will be return.

Parameters:

`[in]`	colorId	The element in the color list to examine
`[out]`	color	Storage for the color value
`[in]`	colorSet	Color set to work with
`[in]`	defaultUnsetColor	default unset color

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter Invalid colorId. The colorId should be less than numColors() or numColors(colorSet).
MS::kFailure An object error has occurred.

MStatus MFnMesh::assignColor	(	int	polygonId,
		int	vertexIndex,
		int	colorId,
		const MString *	colorSet = `NULL`
	)

Maps a color value to a specified vertex of a polygon.

Since color (vertex data) are stored per-polygon per-vertex you must specify both the polygon and the vertex that the color entry is mapped to.

The vertexIndex (face-relative/local) is the vertex within the polygon that the color will be mapped to. This index must be in the range 0 to polygonVertexCount(polygonId).

Parameters:

`[in]`	polygonId	The polygon (face) to map to
`[in]`	vertexIndex	The face-relative (local) vertex id of the polygon to map to
`[in]`	colorId	The color entry from the color list that will be mapped
`[in]`	colorSet	Color set to work with

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter Invalid polygonId, vertexIndex, or colorId specified.
MS::kFailure An object error has occurred.

MStatus MFnMesh::assignColors	(	const MIntArray &	colorIds,
		const MString *	colorSet = `NULL`
	)

This method maps all colors for the mesh. The setColor/setColors method is used to create a color table for the mesh. After the table is created, this method is used to map those values to each polygon on a per-vertex basis. The setColor/setColors method should be called before the assignColors method.

The colorIds array should contain the color indices that will be mapped to each polygon-vertex in the mesh. The entries in this array specify which colors in the mesh's color table are mapped to each polygon-vertex. Each entry in the colorIds array must be less than numColors(), or numColors(colorSet) for a named colorSet. The size of the colorIds array is equivalent to the number of polygon-vertices, so for a cube with all polygons mapped there would be 24 entries.

Parameters:

`[in]`	colorIds	The color indices to be mapped to each polygon-vertex
`[in]`	colorSet	Color set to work with

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter Invalid colorIds array.
MS::kFailure An object error has occurred.

Examples:

meshReorderCmd.cpp.

MStatus MFnMesh::clearColors ( const MString * colorSet = NULL )

This method clears out all color for the mesh, and leaves behind an empty color set.

This method should be used if it is needed to shrink the actual size of the color table. In this case, the user should call clearColors, setColors and then assignColors to rebuild the color mapping info.

When called on a dataMesh, the colors are removed. When called on a shape with no history, the colors are removed and the attributes are set on the shape. When called on a shape with history, the polyColorDel command is invoked and a polyColorDel node is created.

Parameters:

[in] colorSet Color set to work with

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter Invalid colorIds array.
MS::kInvalidIndex Invalid colorSet was specified
MS::kFailure An object error has occurred.

int MFnMesh::getHoles	(	MIntArray &	holeInfoArray,
		MIntArray &	holeVertexArray,
		MStatus *	ReturnStatus = `NULL`
	)

Retrieves a list of the holes in the polygon.

Parameters:

`[out]`	holeInfoArray	Receives an array of integer triples, one for each hole in the mesh. The first element in each triple represents the index of the holed face. The next two elements represent the number of vertices in the hole and the hole's start index in list of hole vertices in holeVertexArray, respectively. For example, if holeInfoArray = [ 0, 3, 0, 1, 4, 3 ], then this means that face 0 contains a 3-vertex hole whose vertex indices are stored in elements 0, 1, 2 of holeVertexArray, and face 1 contains a 4-vertex hole whose vertex indices are stored in elements 3, 4, 5, 6 of holeVertexArray.
`[out]`	holeVertexArray	Receives an array consisting of the vertex indices of every hole in the mesh. The third element of each triple in holeInfoArray is the index of the start of a particular hole's vertex list in this array.

Returns:: The number of holes in the mesh.

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

bool MFnMesh::onBoundary	(	int	polygonId,
		MStatus *	ReturnStatus = `NULL`
	)			const

A method to determines whether the specified face in the mesh is a boundary face.

Parameters:

`[in]`	polygonId	The polygon (face) to examine
`[out]`	ReturnStatus	The return status of the method

Returns:

true If the specified edge is on the border of the object.
false If the specified edge is not on the boundary of the object.

Status Codes:

MS::kSuccess The method was successful.
MS::kInvalidParameter Invalid polygonId was specified
MS::kFailure An object error has occurred.

bool MFnMesh::isBlindDataTypeUsed	(	int	blindDataId,
		MStatus *	ReturnStatus = `NULL`
	)			const

Is this BlindData type id is already in use in this scene?

Parameters:

`[in]`	blindDataId	The blind data id to check for
`[out]`	ReturnStatus	Status Code

Returns:: true: Id in use, false: id not in use

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

Examples:

blindDataMesh.cpp.

MStatus MFnMesh::createBlindDataType	(	int	blindDataId,
		MStringArray	longNames,
		MStringArray	shortNames,
		MStringArray	formatNames
	)

Create a new blind data type. If the type id is already in use, this method will fail. Format names must be one of "int" "float" "double" "boolean" "string" "binary".

Parameters:

`[in]`	blindDataId	The desired id for the new blind data type
`[in]`	longNames	Attribute long names
`[in]`	shortNames	Attribute short names
`[in]`	formatNames	Names of the data types.

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

Examples:

blindDataMesh.cpp.

bool MFnMesh::hasBlindDataComponentId	(	int	compID,
		MFn::Type	compType,
		int	blindDataId,
		MStatus *	ReturnStatus = `NULL`
	)			const

Does this component have blind data with the given ID.

Parameters:

`[in]`	compID	The component to check for blind data om When compType = MFn::kMeshFaceVertComponent then compID must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
`[in]`	compType	The component type e.g. MFn::kMeshVertComponent
`[in]`	blindDataId	The blind data id to check for
`[out]`	ReturnStatus	Status Code

Returns:: true: has the specified blind data, false: does not

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

bool MFnMesh::hasBlindData	(	MFn::Type	compType,
		int	blindDataId,
		MStatus *	ReturnStatus = `NULL`
	)			const

Returns true if any component of the given type on this mesh have blind data with the given ID.

Parameters:

`[in]`	compType	The component type e.g. MFn::kMeshVertComponent
`[in]`	blindDataId	The blind data id to check for
`[out]`	ReturnStatus	Status Code

Returns:: true: has the specified blind data, false: does not

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

bool MFnMesh::hasBlindDataComponentId	(	int	compID,
		MFn::Type	compType,
		MStatus *	ReturnStatus = `NULL`
	)			const

Does this component have any kind of blind data

Parameters:

`[in]`	compID	The component to check for blind data on When compType = MFn::kMeshFaceVertComponent then compID must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
`[in]`	compType	The component type e.g. MFn::kMeshVertComponent
`[out]`	ReturnStatus	Status Code

Returns:: true: has the specified blind data, false: does not

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

bool MFnMesh::hasBlindData	(	MFn::Type	compType,
		MStatus *	ReturnStatus = `NULL`
	)			const

Does any component of this type have any blind data. (.e. is there any vertex blind data on this mesh?)

Parameters:

`[in]`	compType	The component type e.g. MFn::kMeshVertComponent
`[out]`	ReturnStatus	Status Code

Returns:: true: has the specified blind data, false: does not

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getBlindDataTypes	(	MFn::Type	compType,
		MIntArray &	blindDataIds
	)			const

Get the list of blind data ID's associated with the given component type on this mesh. (e.g. all blind data ID's present on vertex compontents)

Parameters:

`[in]`	compType	The component type e.g. MFn::kMeshVertComponent
`[out]`	blindDataIds	space for this list of blind data id values.

Returns:: Status Code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getBlindDataAttrNames	(	int	blindDataId,
		MStringArray &	longNames,
		MStringArray &	shortNames,
		MStringArray &	formatNames
	)			const

Get the blind data attribute names and types for the specified blind data type id. Format names will be one of "int" "float" "double" "boolean" "string" "binary".

Parameters:

`[in]`	blindDataId	The blind data id to check for
`[out]`	longNames	Space for the attribute long names
`[out]`	shortNames	Space for the attribute short names
`[out]`	formatNames	Space for the data format names

Returns:: Status Code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred. The specified blind data type does not exist.

MStatus MFnMesh::getFaceVertexBlindDataIndex	(	int	faceIndex,
		int	vertexIndex,
		int &	blindDataIndex
	)			const

Get the single index to retrieve face-vertex blind data.

Parameters:

`[in]`	faceIndex	The face index to look for
`[in]`	vertexIndex	The object-relative (mesh-relative/global) vertex index
`[out]`	blindDataIndex	The component index for face vertex blind data storage to be returned

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getBlindDataFaceVertexIndices	(	int	blindDataIndex,
		int &	faceIndex,
		int &	vertexIndex
	)			const

Get the face and vertex indices from the face-vertex blind data index.

Parameters:

`[in]`	blindDataIndex	The component index for face vertex blind data storage to decompose
`[in]`	faceIndex	The corresponding face index to be returned
`[out]`	vertexIndex	The object-relative (mesh-relative/global) vertex index to be returned

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getIntBlindData	(	int	compID,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		int &	data
	)			const

Get the blind data value for the specified blind data attribute of the specified component. If the type of the attribute is not correct, this method will fail.

Parameters:

`[in]`	compID	The component to get for blind data on. When compType = MFn::kMeshFaceVertComponent then compID must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
`[in]`	compType	The component type e.g. MFn::kMeshVertComponent
`[in]`	blindDataId	The blind data id to check for
`[in]`	attrName	The attribute name
`[out]`	data	Space for the data item

Returns:: Status Code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getIntBlindData	(	MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		MIntArray &	compIDs,
		MIntArray &	data
	)			const

Get the blind data value for the specified blind data attribute of the given type of component. If the type of the attribute is not correct, this method will fail.

Parameters:

`[in]`	compType	The component type e.g. MFn::kMeshVertComponent
`[in]`	blindDataId	The blind data id to check for
`[in]`	attrName	The attribute name
`[out]`	compIDs	Space for the component indexes of the items When compType = MFn::kMeshFaceVertComponent then the elements of compIDs must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
`[out]`	data	Space for the data items

Returns:: true: has the specified blind data, false: does not

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getFloatBlindData	(	int	compID,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		float &	data
	)			const

Get the blind data value for the specified blind data attribute of the specified component. If the type of the attribute is not correct, this method will fail.

Parameters:

`[in]`	compID	The component to get for blind data on When compType = MFn::kMeshFaceVertComponent then compID must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
`[in]`	compType	The component type e.g. MFn::kMeshVertComponent
`[in]`	blindDataId	The blind data id to check for
`[in]`	attrName	The attribute name
`[out]`	data	Space for the data item

Returns:: Status Code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getFloatBlindData	(	MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		MIntArray &	compIDs,
		MFloatArray &	data
	)			const

Get the blind data value for the specified blind data attribute for all components of the given type. If the type of the attribute is not correct, this method will fail.

Parameters:

`[in]`	compType	The component type e.g. MFn::kMeshVertComponent
`[in]`	blindDataId	The blind data id to check for
`[in]`	attrName	The attribute name
`[out]`	compIDs	Space for the component indexes of the items When compType = MFn::kMeshFaceVertComponent then the elements of compIDs must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
`[out]`	data	Space for the data items

Returns:: Status Code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getDoubleBlindData	(	int	compID,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		double &	data
	)			const

Get the blind data value for the specified blind data attribute of the specified component. If the type of the attribute is not correct, this method will fail.

Parameters:

`[in]`	compID	The component to get for blind data on When compType = MFn::kMeshFaceVertComponent then compID must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
`[in]`	compType	The component type e.g. MFn::kMeshVertComponent
`[in]`	blindDataId	The blind data id to check for
`[in]`	attrName	The attribute name
`[out]`	data	Space for the data item

Returns:: Status Code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getDoubleBlindData	(	MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		MIntArray &	compIDs,
		MDoubleArray &	data
	)			const

Get the blind data value for the specified blind data attribute for all components of the given type. If the type of the attribute is not correct, this method will fail.

Parameters:

`[in]`	compType	The component type e.g. MFn::kMeshVertComponent
`[in]`	blindDataId	The blind data id to check for
`[in]`	attrName	The attribute name
`[out]`	compIDs	Space for the component indexes of the items When compType = MFn::kMeshFaceVertComponent then the elements of compIDs must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
`[out]`	data	Space for the data items

Returns:: Status Code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getBoolBlindData	(	int	compID,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		bool &	data
	)			const

Get the blind data value for the specified blind data attribute of the specified component. If the type of the attribute is not correct, this method will fail.

Parameters:

`[in]`	compID	The component to get for blind data on When compType = MFn::kMeshFaceVertComponent then compID must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
`[in]`	compType	The component type e.g. MFn::kMeshVertComponent
`[in]`	blindDataId	The blind data id to check for
`[in]`	attrName	The attribute name
`[out]`	data	Space for the data item

Returns:: Status Code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getBoolBlindData	(	MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		MIntArray &	compIDs,
		MIntArray &	data
	)			const

Get the blind data value for the specified blind data attribute for all components of the given type. If the type of the attribute is not correct, this method will fail.

Parameters:

`[in]`	compType	The component type e.g. MFn::kMeshVertComponent
`[in]`	blindDataId	The blind data id to check for
`[in]`	attrName	The attribute name
`[out]`	compIDs	Space for the component indexes of the items When compType = MFn::kMeshFaceVertComponent then the elements of compIDs must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
`[out]`	data	Space for the data items (note that we return the bool data as an MIntArray since we don't have a convenient bool array type

Returns:: Status Code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MString MFnMesh::stringBlindDataComponentId	(	int	compID,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		MStatus *	ReturnStatus = `NULL`
	)			const

Get the blind data value for the specified blind data attribute of the specified component. If the type of the attribute is not correct, this method will fail.

Parameters:

`[in]`	compID	The component to get for blind data on When compType = MFn::kMeshFaceVertComponent then compID must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
`[in]`	compType	The component type e.g. MFn::kMeshVertComponent
`[in]`	blindDataId	The blind data id to check for
`[in]`	attrName	The attribute name
`[out]`	ReturnStatus	Status code. See below.

Returns:: Blind data.

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getStringBlindData	(	MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		MIntArray &	compIDs,
		MStringArray &	data
	)			const

Get the blind data value for the specified blind data attribute for all components of the given type. If the type of the attribute is not correct, this method will fail.

Parameters:

`[in]`	compType	The component type e.g. MFn::kMeshVertComponent
`[in]`	blindDataId	The blind data id to check for
`[in]`	attrName	The attribute name
`[out]`	compIDs	Space for the component indexes of the items When compType = MFn::kMeshFaceVertComponent then the elements of compIDs must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
`[out]`	data	Space for the data items (note that we return the bool data as an MIntArray since we don't have a convenient bool array type

Returns:: Status Code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MString MFnMesh::binaryBlindDataComponentId	(	int	compID,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		MStatus *	ReturnStatus = `NULL`
	)			const

Get the blind data value for the specified blind data attribute of the specified component. If the type of the attribute is not correct, this method will fail.

Parameters:

`[in]`	compID	The component to get for blind data on When compType = MFn::kMeshFaceVertComponent then compID must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
`[in]`	compType	The component type e.g. MFn::kMeshVertComponent
`[in]`	blindDataId	The blind data id to check for
`[in]`	attrName	The attribute name
`[out]`	ReturnStatus	Status code. See below.

Returns:: The data item.

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getBinaryBlindData	(	MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		MIntArray &	compIDs,
		MStringArray &	data
	)			const

Get the blind data value for the specified blind data attribute for all components of the given type. If the type of the attribute is not correct, this method will fail.

Parameters:

`[in]`	compType	The component type e.g. MFn::kMeshVertComponent
`[in]`	blindDataId	The blind data id to check for
`[in]`	attrName	The attribute name
`[out]`	compIDs	Space for the component indexes of the items When compType = MFn::kMeshFaceVertComponent then the elements of compIDs must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
`[out]`	data	Space for the data items (note that we return the bool data as an MIntArray since we don't have a convenient bool array type

Returns:: Status Code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::setIntBlindData	(	int	compID,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		int	data
	)

Set a value for an integer blind data attribute.

Parameters:

`[in]`	compID	The component to set the blind data for When compType = MFn::kMeshFaceVertComponent then compID must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
`[in]`	compType	The component type e.g. MFn::kMeshVertComponent
`[in]`	blindDataId	The desired id for the new blind data type
`[in]`	attrName	Attribute name
`[in]`	data	Attribute value

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::setIntBlindData	(	MIntArray &	compIDs,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		int	data
	)

Set a value for an integer blind data on an array of components

Parameters:

`[in]`	compIDs	The components to set the blind data for When compType = MFn::kMeshFaceVertComponent then the elements of compIDs must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
`[in]`	compType	The component type e.g. MFn::kMeshVertComponent
`[in]`	blindDataId	The desired id for the new blind data type
`[in]`	attrName	Attribute name
`[in]`	data	Attribute value

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::setIntBlindData	(	MIntArray &	compIDs,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		MIntArray &	data
	)

Set a values for an integer blind data on an array of components. The arrays of values and components must be the same size.

Parameters:

`[in]`	compIDs	The components to set the blind data for When compType = MFn::kMeshFaceVertComponent then the elements of compIDs must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
`[in]`	compType	The component type e.g. MFn::kMeshVertComponent
`[in]`	blindDataId	The desired id for the new blind data type
`[in]`	attrName	Attribute name
`[in]`	data	The attribute values for each component

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::setFloatBlindData	(	int	compID,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		float	data
	)

Set a value for a float blind data attribute.

Parameters:

`[in]`	compID	The component to set the blind data for When compType = MFn::kMeshFaceVertComponent then compID must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
`[in]`	compType	The component type e.g. MFn::kMeshVertComponent
`[in]`	blindDataId	The desired id for the new blind data type
`[in]`	attrName	Attribute name
`[in]`	data	Attribute value

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::setFloatBlindData	(	MIntArray &	compIDs,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		float	data
	)

Set a value for float blind data on an array of components

Parameters:

`[in]`	compIDs	The components to set the blind data for When compType = MFn::kMeshFaceVertComponent then the elements of compIDs must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
`[in]`	compType	The component type e.g. MFn::kMeshVertComponent
`[in]`	blindDataId	The desired id for the new blind data type
`[in]`	attrName	Attribute name
`[in]`	data	Attribute value

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::setFloatBlindData	(	MIntArray &	compIDs,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		MFloatArray &	data
	)

Set a values for a float blind data on an array of components. The arrays of values and components must be the same size.

Parameters:

`[in]`	compIDs	The components to set the blind data for When compType = MFn::kMeshFaceVertComponent then the elements of compIDs must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
`[in]`	compType	The component type e.g. MFn::kMeshVertComponent
`[in]`	blindDataId	The desired id for the new blind data type
`[in]`	attrName	Attribute name
`[in]`	data	The attribute values for each component

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::setDoubleBlindData	(	int	compID,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		double	data
	)

Set a value for a double blind data attribute.

Parameters:

`[in]`	compID	The component to set the blind data for When compType = MFn::kMeshFaceVertComponent then compID must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
`[in]`	compType	The component type e.g. MFn::kMeshVertComponent
`[in]`	blindDataId	The desired id for the new blind data type
`[in]`	attrName	Attribute name
`[in]`	data	Attribute value

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

Examples:

blindDataMesh.cpp.

MStatus MFnMesh::setDoubleBlindData	(	MIntArray &	compIDs,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		double	data
	)

Set a value for double blind data on an array of components

Parameters:

`[in]`	compIDs	The components to set the blind data for When compType = MFn::kMeshFaceVertComponent then the elements of compIDs must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
`[in]`	compType	The component type e.g. MFn::kMeshVertComponent
`[in]`	blindDataId	The desired id for the new blind data type
`[in]`	attrName	Attribute name
`[in]`	data	Attribute value

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::setDoubleBlindData	(	MIntArray &	compIDs,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		MDoubleArray &	data
	)

Set a values for a double blind data on an array of components. The arrays of values and components must be the same size.

Parameters:

`[in]`	compIDs	The components to set the blind data for When compType = MFn::kMeshFaceVertComponent then the elements of compIDs must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
`[in]`	compType	The component type e.g. MFn::kMeshVertComponent
`[in]`	blindDataId	The desired id for the new blind data type
`[in]`	attrName	Attribute name
`[in]`	data	The attribute values for each component

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::setBoolBlindData	(	int	compID,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		bool	data
	)

Set a value for a boolean blind data attribute.

Parameters:

`[in]`	compID	The component to set the blind data for When compType = MFn::kMeshFaceVertComponent then compID must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
`[in]`	compType	The component type e.g. MFn::kMeshVertComponent
`[in]`	blindDataId	The desired id for the new blind data type
`[in]`	attrName	Attribute name
`[in]`	data	Attribute value

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::setBoolBlindData	(	MIntArray &	compIDs,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		bool	data
	)

Set a value for boolean blind data on an array of components

Parameters:

`[in]`	compIDs	The components to set the blind data for When compType = MFn::kMeshFaceVertComponent then the elements of compIDs must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
`[in]`	compType	The component type e.g. MFn::kMeshVertComponent
`[in]`	blindDataId	The desired id for the new blind data type
`[in]`	attrName	Attribute name
`[in]`	data	Attribute value

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::setBoolBlindData	(	MIntArray &	compIDs,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		MIntArray &	data
	)

Set a values for a boolean blind data on an array of components. The arrays of values and components must be the same size.

Parameters:

`[in]`	compIDs	The components to set the blind data for When compType = MFn::kMeshFaceVertComponent then the elements of compIDs must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
`[in]`	compType	The component type e.g. MFn::kMeshVertComponent
`[in]`	blindDataId	The desired id for the new blind data type
`[in]`	attrName	Attribute name
`[in]`	data	The attribute values for each component

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::setStringBlindData	(	int	compID,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		MString	data
	)

Set a value for a string blind data attribute.

Parameters:

`[in]`	compID	The component to set the blind data for When compType = MFn::kMeshFaceVertComponent then compID must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
`[in]`	compType	The component type e.g. MFn::kMeshVertComponent
`[in]`	blindDataId	The desired id for the new blind data type
`[in]`	attrName	Attribute name
`[in]`	data	Attribute value

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::setStringBlindData	(	MIntArray &	compIDs,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		MString	data
	)

Set a value for string blind data on an array of components

Parameters:

`[in]`	compIDs	The components to set the blind data for When compType = MFn::kMeshFaceVertComponent then the elements of compIDs must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
`[in]`	compType	The component type e.g. MFn::kMeshVertComponent
`[in]`	blindDataId	The desired id for the new blind data type
`[in]`	attrName	Attribute name
`[in]`	data	Attribute value

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::setStringBlindData	(	MIntArray &	compIDs,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		MStringArray &	data
	)

Set a values for a string blind data on an array of components. The arrays of values and components must be the same size.

Parameters:

`[in]`	compIDs	The components to set the blind data for When compType = MFn::kMeshFaceVertComponent then the elements of compIDs must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
`[in]`	compType	The component type e.g. MFn::kMeshVertComponent
`[in]`	blindDataId	The desired id for the new blind data type
`[in]`	attrName	Attribute name
`[in]`	data	The attribute values for each component

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::setBinaryBlindData	(	int	compID,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		MString	data
	)

Set a value for a binary blind data attribute.

Parameters:

`[in]`	compID	The component to set the blind data for When compType = MFn::kMeshFaceVertComponent then compID must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
`[in]`	compType	The component type e.g. MFn::kMeshVertComponent
`[in]`	blindDataId	The desired id for the new blind data type
`[in]`	attrName	Attribute name
`[in]`	data	Attribute value as an MString. Note that the physical size must be set explicitly for binary data.

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::setBinaryBlindData	(	MIntArray &	compIDs,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		MString	data
	)

Set a value for binary blind data on an array of components

Parameters:

`[in]`	compIDs	The components to set the blind data for When compType = MFn::kMeshFaceVertComponent then the elements of compIDs must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
`[in]`	compType	The component type e.g. MFn::kMeshVertComponent
`[in]`	blindDataId	The desired id for the new blind data type
`[in]`	attrName	Attribute name
`[in]`	data	Attribute value

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::setBinaryBlindData	(	MIntArray &	compIDs,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		MStringArray &	data
	)

Set a values for a binary blind data on an array of components. The arrays of values and components must be the same size.

Parameters:

`[in]`	compIDs	The components to set the blind data for When compType = MFn::kMeshFaceVertComponent then the elements of compIDs must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
`[in]`	compType	The component type e.g. MFn::kMeshVertComponent
`[in]`	blindDataId	The desired id for the new blind data type
`[in]`	attrName	Attribute name
`[in]`	data	The attribute values for each component

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::setBinaryBlindData	(	int	compID,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		char *	data,
		int	length
	)

Set a value for a binary blind data attribute.

Parameters:

`[in]`	compID	The component to set the blind data for When compType = MFn::kMeshFaceVertComponent then compID must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
`[in]`	compType	The component type e.g. MFn::kMeshVertComponent
`[in]`	blindDataId	The desired id for the new blind data type
`[in]`	attrName	Attribute name
`[in]`	data	Attribute value as a char string
`[in]`	length	Length of char string to use

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::clearBlindData	(	int	compID,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName
	)

Delete a value for a binary blind data attribute on a particular componenr

Parameters:

`[in]`	compID	The component to clear the blind data for When compType = MFn::kMeshFaceVertComponent then compID must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
`[in]`	compType	The component type e.g. MFn::kMeshVertComponent
`[in]`	blindDataId	The id for the blind data to be cleared
`[in]`	attrName	Attribute name

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::clearBlindData	(	MFn::Type	compType,
		int	blindDataId,
		MString	attrName
	)

Delete the values for the given attribute on the given binary blind data type from all components of the given type.

Parameters:

`[in]`	compType	The component type e.g. MFn::kMeshVertComponent
`[in]`	blindDataId	The id for the blind data to be cleared
`[in]`	attrName	The attribute to clear the blind data for

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::clearBlindData ( MFn::Type compType )

Delete all blind data from components of the given type, e.g. all edges from a particular component.

Parameters:

[in] compType The component type e.g. MFn::kMeshVertComponent

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::clearBlindData	(	int	compID,
		MFn::Type	compType,
		int	blindDataId
	)

Delete the values for a binary blind data type (all its attributes) from a particular component.

Parameters:

`[in]`	compID	The component to clear the blind data for When compType = MFn::kMeshFaceVertComponent then compID must be obtained by calling MFnMesh::getFaceVertexBlindDataIndex(faceIndex,vertexIndex)
`[in]`	compType	The component type e.g. MFn::kMeshVertComponent
`[in]`	blindDataId	The id for the blind data to be cleared

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::clearBlindData	(	MFn::Type	compType,
		int	blindDataId
	)

Delete the values for a binary blind data type (all its attributes) from all components of the given type.

Parameters:

`[in]`	compType	The component type e.g. MFn::kMeshVertComponent
`[in]`	blindDataId	The id for the blind data to be cleared

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

void MFnMesh::setCheckSamePointTwice ( bool check = true )

This method allows the turning on or off of duplicate point checking when polygons are created or added using this class. Checking for duplicates, is the default state.

Parameters:

[in] check true for checking, false otherwise

bool MFnMesh::getCheckSamePointTwice ( void )

Return true if checking for duplicate points is turned on. Return false otherwise.

MStatus MFnMesh::createInPlace	(	int	numVertices,
		int	numPolygons,
		const MFloatPointArray &	vertexArray,
		const MIntArray &	polygonCounts,
		const MIntArray &	polygonConnects
	)

Replaces the existing polygonal mesh with a new one specified by array of vertices and polygon connection information. This function will then operate on the replacement surface.

This method is meant to be as efficient as possible and thus assumes that all the given data is topologically correct.

Parameters:

`[in]`	numVertices	number of vertices
`[in]`	numPolygons	number of polygons
`[in]`	vertexArray	point (vertex) array. This should include all the vertices in the mesh, and no extras. For example, a cube could have the vertices: { (-1,-1,-1), (1,-1,-1), (1,-1,1), (-1,-1,1), (-1,1,-1), (-1,1,1), (1,1,1), (1,1,-1) } polygonCounts array of vertex counts for each polygon. For example the cube would have 6 faces, each of which had 4 verts, so the polygonCounts would be {4,4,4,4,4,4}.
`[in]`	polygonConnects	array of vertex connections for each polygon. For example, in the cube, we have 4 vertices for every face, so we list the vertices for face0, face1, etc consecutively in the array. These are specified by indexes in the vertexArray: e.g for the cube: { 0, 1, 2, 3, 4, 5, 6, 7, 3, 2, 6, 5, 0, 3, 5, 4, 0, 4, 7, 1, 1, 7, 6, 2 }

Returns:

MS::kSuccess The method was successful.
MS::kLicenseFailure Application not licensed for attempted operation
MS::kInvalidParameter One of the following parameter errors:

Array length does not match given item count
parentOrOwner was not valid
There was no model present to add the object to

MS::kFailure An object error has occurred
MS::kInsufficientMemory Insufficient memory to complete this method

MStatus MFnMesh::copyInPlace ( const MObject & source )

This method creates copies the given source mesh onto the current surface. After the copy this function set continues operate on the original mesh.

Parameters:

[in] source the mesh to be copied

Returns:

MS::kSuccess The method was successful.
MS::kLicenseFailure Application not licensed for attempted operation
MS::kInvalidParameter One of the following parameter errors

MS::kInvalidDataType source object must be one of kMeshGeom, kMeshData, kMesh
MS::kShapeHasNoGeometry dataMesh or underlying geometry was null
MS::kObjectDoesNotExist Source object was null

MS::kFailure An object error has occurred.

MS::kModelActive There was no model present to add the object to
MS::kInsufficientMemory Insufficient memory to complete this method

MString MFnMesh::createColorSetWithName	(	const MString &	colorSetName,
		MDGModifier *	modifier,
		MStatus *	ReturnStatus
	)

This method is obsolete.

Deprecated:: Use createColorSetWithName(const MString &, MDGModifier *, const MUintArray *, MStatus *)

Create a new empty color set for this mesh. If the name passed in is empty (zero length), or a color set with the same name already exists, then a new unique name is generated and used as the new color set's name.

In the case where the name is empty, the new name will be of the format "colorSet#" where # is a number that makes the name unique for this mesh.

In the case where a color set already exists with the same name as the name passed in, then the new name will be of the format "userName#", where "userName" was the name specified, and # is a number appended on to "userName" to make the name unique for this mesh.

This operation will only work when the MFnMesh refers to a shape.

Parameters:

`[in]`	colorSetName	The name of the color set to add.
`[in]`	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.
`[in]`	ReturnStatus	Status code. See below.

Returns:: The resulting name of the color set.

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MString MFnMesh::currentColorSetName ( MStatus * ReturnStatus ) const

This method is obsolete. This method is not available in Python.

Deprecated:: Use MFnMesh::currentColorSetName(int, MStatus*) instead.

Get the name of the "current" or "working" color set. The "current" color set is the color set which is used for color operations when no color set is explcitly specified.

If there is no current color set, then a empty string will be returned on the string argument passed on.

Parameters:

[out] ReturnStatus Status code. See below.

Returns:

Name of the "current" color set, if any.

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MObject MFnMesh::generateSmoothMesh	(	MObject	parentOrOwner,
		MStatus *	ReturnStatus
	)

This method is obsolete.

Deprecated:: Use generateSmoothMesh(MObject, MMeshSmoothOptions * , MStatus *) instead.

Creates a new polygonal mesh using the Smooth Mesh Preview attributes of this mesh. Unlike the MFnMesh::create functions, this function does not set this function set to operate on the new surface.

The parentOrOwner argument is used to specify the owner of the new surface.

If the parentOrOwner is kMeshData then the created surface will be of type kMeshGeom and will be returned. The parentOrOwner will become the owner of the new mesh.

If parentOrOwner is NULL then a new transform will be created and returned which will be the parent for the mesh. The new transform will be added to the DAG.

If parentOrOwner is a DAG node then the new mesh will be returned and the parentOrOwner will become its parent.

Parameters:

`[in]`	parentOrOwner	parent of the polygon that will be created
`[out]`	ReturnStatus	Status code

Returns:

If parentOrOwner is NULL then the transform for this surface is returned
If parentOrOwner is a DAG object then the new surface shape is returned
The surface geometry is returned if parentOrOwner is of type kMeshData

Status Codes:

MS:kSuccess The method was successful.
MS::kLicenseFailure Application not licensed for attempted operation
MS::kInvalidParameter One of the following parameter errors

parentOrOwner was not valid
There was no model present to add the object to

MS::kFailure An object error has occurred.
MS::kInsufficientMemory Insufficient memory to complete this method

MObject MFnMesh::addPolygon	(	MPointArray &	vertexArray,
		double	polyTolerance,
		bool	mergeVertices = `true`,
		double	pointTolerance = `1.0e-10`,
		bool	forceGeometry = `true`,
		MObject	parentOrOwner = `MObject::kNullObj`,
		MStatus *	ReturnStatus = `NULL`
	)

This method is obsolete. This method is not available in Python.

Deprecated:: Use the other MFnMesh::addPolygon method.

Adds a new polygon to this polygonal mesh.

If there is no current geometry then a new polygonal mesh is created and parentOrOwner is used to specify the owner of the new surface. If parentOrOwner is NULL or a DAG parent is specified, then a new transform will be created in the DAG and returned. If the parentOrOwner is kMeshData then the new surface will become its data and the geometry will be returned.

If we are adding to an existing polygonal mesh then parentOrOwner is ignored and the geometry is returned.

Parameters:

`[in]`	vertexArray	array of ordered vertices that make up the polygon
`[in]`	polyTolerance	specifies the planar tolerance for the mesh. If all the verticies of a polygon are within this distance of the best fit computed plane between them, the polygon is considered to be planar.
`[in]`	mergeVertices	If true then if a vertex falls within pointTolerance of an existing vertex then the existing vertex is reused.
`[in]`	pointTolerance	specifies how close verticies have to be to before they are merged. This merging is only done if mergeVerticies is true.
`[in]`	forceGeometry	if true handle no-manifold topology regardless of non connectivity
`[in]`	parentOrOwner	the DAG parent or kMeshData the new surface will belong to
`[out]`	ReturnStatus	status code

Returns:: The transform if one is created, otherwise the geometry.

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

bool MFnMesh::intersect	(	MPoint &	raySource,
		MVector &	rayDirection,
		MPointArray &	points,
		MStatus *	ReturnStatus = `NULL`
	)			const

This method is obsolete. This method is not available in Python.

Deprecated:: Use the other MFnMesh::intersect method.

Determines whether the given ray intersects this polygon and if so, returns the points of intersection. The points of intersection will be in order of closest point to the raySource.

This method is not threadsafe when invoked by multiple threads on the same object at the same time. It is threadsafe as long as each thread operates on a different mesh object.

Parameters:

`[in]`	raySource	Starting point for the ray
`[in]`	rayDirection	Direction of the ray
`[out]`	points	Storage for any points of intersection
`[out]`	ReturnStatus	Status code

Returns:

true The given ray intersects this polygon
false The given ray does not intersect this polygon

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

bool MFnMesh::intersect	(	const MPoint &	raySource,
		const MVector &	rayDirection,
		MPointArray &	points,
		MStatus *	ReturnStatus = `NULL`
	)			const

This method is obsolete. This method is not available in Python.

Deprecated:: Use the other MFnMesh::intersect method.

Determines whether the given ray intersects this polygon and if so, returns the points of intersection. The points of intersection will be in order of closest point to the raySource.

This method is not threadsafe when invoked by multiple threads on the same object at the same time. It is threadsafe as long as each thread operates on a different mesh object.

Parameters:

`[in]`	raySource	Starting point for the ray
`[in]`	rayDirection	Direction of the ray
`[out]`	points	Storage for any points of intersection
`[out]`	ReturnStatus	Status code

Returns:

true The given ray intersects this polygon
false The given ray does not intersect this polygon

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getBlindDataAttrNames	(	int	blindDataId,
		MStringArray &	longNames,
		MStringArray &	shortNames
	)			const

Get the blind data attribute names for the specified blind data type id.

Parameters:

`[in]`	blindDataId	The blind data id to check for
`[out]`	longNames	Space for the attribute long names
`[out]`	shortNames	Space for the attribute short names

Returns:: Status Code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

bool MFnMesh::hasBlindData	(	int	compID,
		MFn::Type	compType,
		int	blindDataId,
		MStatus *	ReturnStatus = `NULL`
	)			const

This method is obsolete. This method is not available in Python.

Deprecated:: Use MFnMesh::hasBlindDataComponentId instead.

bool MFnMesh::hasBlindData	(	int	compID,
		MFn::Type	compType,
		MStatus *	ReturnStatus = `NULL`
	)			const

This method is obsolete. This method is not available in Python.

Deprecated:: Use MFnMesh::hasBlindDataComponentId instead.

MStatus MFnMesh::createUVSet	(	MString &	uvSetName,
		MDGModifier *	modifier = `NULL`,
		const MUintArray *	instances = `NULL`
	)

This method is not available in Python.

Create a new empty uv set for this mesh. If the name passed in is empty (zero length), or a uv set with the same name already exists, then a new unique name is generated and used as the new uvset's name.

In the case where the name is empty, the new name will be of the format "uvSet#" where # is a number that makes the name unique for this mesh.

In the case where a uvset already exists with the same name as the name passed in, then the new name will be of the format "userName#", where "userName" was the name specified, and # is a number appended on to "userName" to make the name unique for this mesh.

This operation will only work when the MFnMesh refers to a shape.

Python Notes

This method is not supported in Python. Please see createUVSetWithName()

Parameters:

`[in]`	uvSetName	The name of the uv set to add. This name will be overwritten with a different name, if a new name needed to be generated.
`[in]`	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.
`[in]`	instances	The instance number(s) for which the set should be added, or NULL if the uv-set should be shared by all instances.

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

Examples:

meshReorderCmd.cpp.

MStatus MFnMesh::copyUVSet	(	const MString &	fromName,
		MString &	toName,
		MDGModifier *	modifier = `NULL`
	)

This method is not available in Python.

Copies a uv set from one to another for this mesh. The source must exist. The following cases can occur:

1) If the destination name is the same as the source than no copy will be made. 2) If the destination name exists a copy will be made to the destination. 3) If the destination name does not exist, then a new uv set will be created with a unique name, and then the copy will be made. The name generated will be "destinationName>#", where "destinationName" is the original name sent in, and "#" is a ascending number appended to the end of the original name.

This operation will only work when the MFnMesh refers to a shape.

Python Notes

This method is not supported in Python. Please see the one which returns a string

Parameters:

`[in]`	fromName	The name of the uv set to change
`[in]`	toName	The name to set the uv set to. May be modified to return the final name used in the case where a new name needs to be generated.
`[in]`	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getCurrentUVSetName	(	MString &	setName,
		int	instance = `-1`
	)			const

This method is not available in Python.

Get the name of the "current" uv set. The "current" uv set is the uv set which is used for uv operations when no uv set is explcitly specified.

If there is no current uv set, then a empty string will be returned on the string argument passed on.

On instanced meshes, uv sets may be applied on a per-instance basis or may be shared across all instances. When the uv sets are per-instance, the concept of the current uv set has two levels of granularity. Namely, the current uv set applies to one or more instances, plus there are other uv sets in the same uv set family that apply to different instances. The instance arguement is used to indicate that if this is a per-instance uv set, you are interested in the name of the uv set that applies to the specified instance. When the index is not specified, the current uv set will be returned regardless of which instance it is for.

Note, the instance argument is only applicable on an MFnMesh that is initialized using a mesh shape. It will return failure if used on an MFnMesh that has no associated shape.

Python Notes

This method is not supported in Python. Please see the one which returns a string.

Parameters:

`[out]`	setName	Name of the "current" uv set, if any.
`[in]`	instance	Instance of the mesh whose set we are interested in

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

Examples:

meshReorderCmd.cpp, and splitUVFtyAction.cpp.

MStatus MFnMesh::createColorSet	(	MString &	colorSetName,
		MDGModifier *	modifier = `NULL`,
		const MUintArray *	instances = `NULL`
	)

This method is not available in Python.

Create a new empty color set for this mesh. If the name passed in is empty (zero length), or a color set with the same name already exists, then a new unique name is generated and used as the new color set's name.

In the case where the name is empty, the new name will be of the format "colorSet#" where # is a number that makes the name unique for this mesh.

In the case where a color set already exists with the same name as the name passed in, then the new name will be of the format "userName#", where "userName" was the name specified, and # is a number appended on to "userName" to make the name unique for this mesh.

This operation will only work when the MFnMesh refers to a shape.

Python Notes

This method is not supported in Python. Please see createColorSetWithName()

Parameters:

`[in]`	colorSetName	The name of the color set to add. This name will be overwritten with a different name, if a new name needed to be generated.
`[in]`	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.
`[in]`	instances	The instance number(s) for which the set should be added, or NULL if the uv-set should be shared by all instances.

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

Examples:

meshReorderCmd.cpp.

MStatus MFnMesh::createColorSet	(	MString &	colorSetName,
		MDGModifier *	modifier,
		bool	clamped,
		MColorRepresentation	rep,
		const MUintArray *	instances = `NULL`
	)

This method is not available in Python.

Create a new empty color set of specified channels for this mesh. If the name passed in is empty (zero length), or a color set with the same name already exists, then a new unique name is generated and used as the new color set's name.

In the case where the name is empty, the new name will be of the format "colorSet#" where # is a number that makes the name unique for this mesh.

In the case where a color set already exists with the same name as the name passed in, then the new name will be of the format "userName#", where "userName" was the name specified, and # is a number appended on to "userName" to make the name unique for this mesh.

This operation will only work when the MFnMesh refers to a shape.

Python Notes

This method is not supported in Python. Please see createColorSetWithName()

Parameters:

`[in]`	colorSetName	The name of the color set to add. This name will be overwritten with a different name, if a new name needed to be generated.
`[in]`	modifier	Since this method may modify the DG, if you wish to undo its effects, you need to keep track of what needs to be undone. If the modifier is non-null, and this MFnMesh refers to a shape, then it will add the command to be undone to the modifier. Use MDGModifier::undoIt to undo the effects of this method.
`[in]`	clamped	The color set stores values in 0 to 1 range if true. no range limit if false
`[in]`	rep	The color set stores RGB, RGBA, or Alpha
`[in]`	instances	The instance number(s) for which the set should be added, or NULL if the uv-set should be shared by all instances.

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

MStatus MFnMesh::getCurrentColorSetName	(	MString &	setName,
		int	instance = `-1`
	)			const

This method is not available in Python.

Get the name of the "current" or "working" color set. The "current" color set is the color set which is used for color operations when no color set is explcitly specified.

If there is no current color set, then a empty string will be returned on the string argument passed on.

On instanced meshes, color sets may be applied on a per-instance basis or may be shared across all instances. When the color sets are per-instance, the concept of the current color set has two levels of granularity. Namely, the current color set applies to one or more instances, plus there are other color sets in the same color set family that apply to different instances. The instance arguement is used to indicate that if this is a per-instance color set, you are interested in the name of the color set that applies to the specified instance. When the index is not specified, the current color set will be returned regardless of which instance it is for.

Note, the instance argument is only applicable on an MFnMesh that is initialized using a mesh shape. It will return failure if used on an MFnMesh that has no associated shape.

Python Notes

This method is not supported in Python. Please see currentColorSetName().

Parameters:

`[out]`	setName	Name of the "current" color set, if any.
`[in]`	instance	Instance of the mesh whose set we are interested in

Returns:: Status code

Status Codes:

MS::kSuccess The method was successful.
MS::kFailure An object error has occurred.

Examples:

meshReorderCmd.cpp.

MStatus MFnMesh::getStringBlindData	(	int	compID,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		MString &	data
	)			const

This method is obsolete. This method is not available in Python.

Deprecated:: Use MFnMesh::stringBlindDataComponentId instead.

MStatus MFnMesh::getBinaryBlindData	(	int	compID,
		MFn::Type	compType,
		int	blindDataId,
		MString	attrName,
		MString &	data
	)			const

This method is obsolete. This method is not available in Python.

Deprecated:: Use MFnMesh::binaryBlindDataComponentId instead.

MFnMesh Class Reference [OpenMaya - API module for common classes, FunctionSet classes]

Detailed Description

Public Types

Public Member Functions

Static Public Member Functions

Protected Member Functions

Member Enumeration Documentation

Constructor & Destructor Documentation

Member Function Documentation

MFnMesh Class Reference
[OpenMaya - API module for common classes, FunctionSet classes]