To display the schematic, you use either the View box or the World View box depending on which module you are in. Each module also has a hotkey for quick access to the schematic.

To display the schematic in the Wipe Editor:

1. Select Schematic from the World View box or press Esc.
   NotePress Esc a second time to return to the previous view.

To display the schematic in the Garbage Mask:

1. Do one of the following:
   • If you accessed the Garbage Mask through the Keyer, select Schematic from the World View box.
   • If you accessed the Garbage Mask through the Modular Keyer or the GMask node in Batch, select GMaskSchm from the View box.
   • Press ‘ (on the Tilde key).
     NotePress ‘ a second time to return to the previous view.

To display the schematic in Action:

1. Select Schematic from the View box or press ‘ (on the Tilde key).
   NotePress ‘ a second time to return to the previous view.

To display the schematic in Distort:

1. Select DistortSchm from the View box or press ‘ (on the Tilde key).
   NotePress ‘ a second time to return to the previous view.

To display the schematic in Batch:

1. Select BatchSchm from the View box or press Esc.
   NotePress Esc a second time to return to the previous view.

To display the schematic in the Modular Keyer:

1. Select MK Schm from the View box or press Esc.
   NotePress Esc a second time to return to the previous view.