FCP to Flame: Video Transitions
 
 
 

The names of FCP transitions are preserved in Flame and are visible in the timeline.

3D Simulation

Final Cut Pro Flame
Cross Zoom Dissolve (partially supported)
Cube Spin Dissolve (partially supported)
Spin 3D Axis transition (partially supported)
Spinback 3D Not supported; replaced by Dissolve
Swing Axis transition (partially supported)
Zoom Axis transition (partially supported)

Dissolve

Final Cut Pro Flame
Additive Dissolve Not supported; replaced by Dissolve
Cross Dissolve Dissolve Additive
Dip to colour Dissolve Dissolve To/From colour (partially supported)
Dither Dissolve Not supported; replaced by Dissolve
Fade in/fade out Dissolve Dissolve To/From Black (partially supported)
Non-Additive Dissolve Dissolve Non-Additive
Ripple Dissolve Not supported; replaced by Dissolve

Iris

Final Cut Pro Flame
Cross Iris SMPTE 007 (partially supported)
Diamond Iris SMPTE 102 (partially supported)
Oval Iris SMPTE 119, 120, or 121 (partially supported)
Point Iris SMPTE 047 (partially supported)
Rectangle Iris SMPTE 101 (partially supported)
Star Iris SMPTE 127, 128, or 129 (partially supported)

Map

Final Cut Pro Flame
Channel Map Not supported; replaced by Dissolve
Luminance Map Not supported; replaced by Dissolve

Page Peel

Final Cut Pro Flame
Page Peel Not supported; replaced by Dissolve

QuickTime

Final Cut Pro Flame
Channel Compositor Not supported; replaced by Dissolve
Chroma Key Not supported; replaced by Dissolve
Explode Not supported; replaced by Dissolve
Gradient Wipe Not supported; replaced by SMPTE 002 without Softness
Implode Not supported; replaced by Axis transition
Iris SMPTE Wipes (partially supported):
  • Rectangle = SMPTE 101
  • Diamond = SMPTE 102
  • Triangle = SMPTE 103
  • Triangle Right = SMPTE 104
  • Triangle Upside Down = SMPTE 105
  • Triangle Left = SMPTE 106
  • Arrowhead = SMPTE 107
  • Arrowhead Right = SMPTE 108
  • Arrowhead Upside Down = SMPTE 109
  • Arrowhead Left = SMPTE 110
  • Pentagon = SMPTE 111
  • Pentagon Upside Down = SMPTE 112
  • Hexagon = SMPTE 113
  • Hexagon Side= SMPTE 114
  • Circle = SMPTE 119
  • Oval = SMPTE 120
  • Oval Side = SMPTE 121
  • Cat Eye = SMPTE 122
  • Cat Eye Side = SMPTE 123
  • Round Rect = SMPTE 124
  • Round Rect Side = SMPTE 125
  • 4 Point Star = SMPTE 127
  • 5 Point Star = SMPTE 128
  • 6 Point Star = SMPTE 129
  • Heart = SMPTE 130
  • Keyhole = SMPTE 131
Matrix Wipe Not supported; replaced by SPMTE 001 with a comment indicating the type of FCP Matrix Wipe that had been at this mark
Push Not supported; replaced by Dissolve
Radial SMPTE Wipes (partially supported):
  • Rotating Top = SMPTE 201
  • Rotating Right = SMPTE 202
  • Rotating Bottom = SMPTE 203
  • Rotating Left = SMPTE 204
  • Rotating Left Bottom = SMPTE 205
  • Rotating Left Right = SMPTE206
  • Rotating Quadrant = SMPTE 207
  • Top to Bottom 180 degree = SMPTE 211
  • Right to Left 180 degree= SMPTE 212
  • Top to Bottom 90 degree= SMPTE 213
  • Right to Left 90 degree = SMPTE 214
  • Top 180 Degree = SMPTE 221
  • Right 180 Degree = SMPTE 222
  • Bottom 180 Degree = SMPTE 223
  • Left 180 Degree = SMPTE 224
  • Counter Rotating Top Bottom = SMPTE 225
  • Counter Rotating Left Right = SMPTE 226
  • Double Rotating Top Bottom = SMPTE 227
  • Double Rotating Left Right = SMPTE 228
  • V Open Top = SMPTE 231
  • V Open Right = SMPTE 232
  • V Open Bottom = SMPTE 233
  • V Open Left = SMPTE 234
  • V Open Top Bottom = not supported; replaced by SMPTE 001
  • V Open Left Right = not supported; replaced by SMPTE 001
  • Rotating Top Left = SMPTE 241
  • Rotating Bottom Left = SMPTE 242
  • Rotating Bottom Right = SMPTE 243
  • Rotating Top Right = SMPTE 244
  • Rotating Top Left Bottom Right = SMPTE 245
  • Rotating Bottom Left to Top Right = SMPTE 246
  • Rotating Top Left Right = SMPTE 251
  • Rotating Left Top Bottom = SMPTE 252
  • Rotating Bottom Left Right = SMPTE 253
  • Rotating Right Top Bottom = SMPTE 254
  • Rotating Double Center Right = not supported; replaced by SMPTE 001
  • Rotating Double Center Top = not supported; replaced by SMPTE 001
  • Rotating Double Center Top Bottom = not supported; replaced by SMPTE 001)
  • Rotating Double Center Left Right = not supported; replaced by SMPTE 001
Slide Axis transition
Wipe SMPTE Wipes (various partially supported):
  • Slide Horizontal = SMPTE 001
  • Slide Vertical = SMPTE 002
  • Top Left = SMPTE 003
  • Top Right = SMPTE 004
  • Bottom Right = SMPTE 005
  • Bottom Left = SMPTE 006
  • Four Corner = SMPTE 007
  • Four Box = SMPTE 008
  • Barn Vertical = SMPTE 021
  • Barn Horizontal = SMPTE 022
  • Top Center = SMPTE 023
  • Right Center = SMPTE 024
  • Bottom Center = SMPTE 025
  • Left Center = SMPTE 026
  • Diagonal Left Down = SMPTE 041
  • Diagonal Right Down = SMPTE 042
  • Vertical Bow Tie = SMPTE 043
  • Horizontal Bow Tie = SMPTE 044
  • Diagonal Left Out = SMPTE 045
  • Diagonal Right Out = SMPTE 046
  • Diagonal Cross = SMPTE 047
  • Diagonal Box = SMPTE 048
  • Filled V = SMPTE 061
  • Filled V Right = SMPTE 062
  • Filled V Bottom = SMPTE 063
  • Filled V Left = SMPTE =064
  • Hollow V = SMPTE 065
  • Hollow V Right = SMPTE 066
  • Hollow V Bottom = SMPTE 067
  • Hollow V Left = SMPTE 068
  • Vertical Zig Zag = SMPTE 071
  • Horizontal Zig Zag = SMPTE 072
  • Vertical Barn Zig Zag = SMPTE 073
  • Horizontal Barn Zig Zag = SMPTE 074
Zoom Axis transition (partially supported)

Slide

Final Cut Pro Flame
Band Slide Not supported; replaced by Dissolve
Box Slide Not supported; replaced by Dissolve
Center Split Slide Not supported; replaced by Dissolve
Multi Spin Slide Not supported; replaced by Dissolve
Push Slide Not supported; replaced by Dissolve
Spin Slide Not supported; replaced by Dissolve
Split Slide Not supported; replaced by Dissolve
Swap Slide Not supported; replaced by Dissolve

Stretch

Final Cut Pro Flame
Cross Stretch Not supported; replaced by Dissolve
Squeeze Axis transition (partially supported)
Squeeze and Stretch Not supported; replaced by Axis Transition
Stretch Axis transition (partially supported)

Wipe

Final Cut Pro Flame
Band Not supported
Center Wipe SMPTE 021 (partially supported)
Checker Wipe Not supported
Checkerboard Wipe Not supported
Clock Wipe SMPTE 201 (partially supported)
Edge Wipe SMPTE 001 (partially supported)
Gradient Wipe Not supported
Inset Wipe
  • Upper Left = SMPTE 003 (partially supported)
  • Top = SMPTE 023
  • Upper Right = SMPTE 004
  • Right = SMPTE 024
  • Lower Right = SMPTE 005 (reverse)
  • Bottom = SMPTE 025
  • Lower Left = SMPTE 006 (reverse)
  • Left = SMPTE 026
Jaws Wipe SMPTE 073 (partially supported, FCP's is smaller than Flame's)
Random Edge Wipe Not supported; replaced by Wipe 001 transition
V Wipe
  • Right = SMPTE 064 (partially supported)
  • Down = SMPTE 61
  • Left = SMPTE 62
  • Up = SMPTE 63
Venetian Blind Wipe Not supported; replaced by SMPTE 001
Wrap Wipe Not supported; replaced by SMPTE 001
Zig-Zag Wipe Not supported; replaced by SMPTE 001