Copying Clips to the Desktop
 
 
 

From Batch or a BFX level, you can send a copy of any clip to the Desktop. If the clip contains soft effects, the soft effects are preserved with the clip.

To save a BFX setup, you must save it separately. To save a setup with the clip copied back to the Desktop, make sure you save the setup after copying the clip.

To copy a clip to the Desktop:

  1. Select the clips to copy in the schematic.

    In the following example, the selected clip has a Text soft effect.

    Show small imageShow large image

    (a) Selected clip with Text soft effect

  2. From the Setup menu, click Clips to Reel.

    Show small imageShow large image

    NoteTo copy the clips to a reel other than the destination reel, select Custom Reel and enter the reel number.

    If you loaded the clips from the library, the clip names turn from blue to white indicating the clips are Desktop clips.

  3. Exit to the Desktop.

    A copy of the selected clip appears on the Desktop. Note that the Text soft effect in the clip is preserved.

    Show small imageShow large image

To save a BFX setup:

  1. Inside a BFX level, click Save, name the setup, and click Save again.
    NoteIf you sent a copy of the clips in Batch to the Desktop using Clips to Reel, make sure you save the setup after sending the copy so that the links from the setup are to the copied clips.

    The BFX setup is saved. The clips are not saved with the setup; however, the links to the original clips are saved. When you load the BFX setup, the Desktop is searched first for the clips and then the library is searched. If the clips are not found, the setup is loaded with black proxies for the missing clips, and the clip name appears in red.