You can reposition a shot
by:
- Scaling
- Panning vertically and horizontally
- Rotating
- Changing the aspect ratio
- Flipping and flopping
When Sync mode is enabled
in a stereoscopic project, you can use the Convergence tool to pan
and scale both eyes at the same time in opposite directions.
To reposition a shot:
- Press the P&S button on the Navigation
panel.
- On the Function panel, use the following
controls.
| Use: |
To: |
| Wheels |
Reposition the image. Wheel 1=Pan X Wheel 2=Pan Y Wheel 3=Scale Wheel 4=Rotate To reset a wheel, press
the button above it.
|
| Knob at right |
Change the image's aspect ratio. To reset, press the button
below it.
|
| First row of buttons at bottom right |
Flip or flop the image. F1=Flip F3=Flop Toggle the state of the
Convergence Tool.
F5=Toggle Convergence
|
| SHOW button |
Toggle the geometry wireframe on or off. |
