Colour
SettingsSelect how Flame uses the colour information
stored within a R3D file.
| Select: |
To have: |
| User |
Flame import RED clips using the options you set
in the Image, Gain, and Curve menus.
|
| Camera |
Flame import RED clips using the look created on
the RED camera and stored in the RED clip. Disables the Image, Gain,
and Curve menu options.
|
| RSX |
Flame import RED clips using the RSX look created
in RED Alert!. The RSX file of a clip must reside in the same folder
as the R3D file of that clip. Disables the Image, Gain, and Curve
menu options. With this option selected,
only clips with an RSX profile can be imported. Clips without an
RSX profile appear to be missing media.
|
| RSX or Camera |
Flame import RED clips using the RSX look. If a
clip has no RSX file, Flame imports it using the camera settings. Disables the Image, Gain,
and Curve menu options.
|
| RSX or User |
Flame imports RED clips using the RSX look. If a
clip has no RSX file, Flame imports it using the options you
set in the Image, Gain, and Curve menus. Enables the Image, Gain,
and Curve menu options.
|
Save
as User Settings buttonEnable to make the Image, Gain,
and Curve menus editable in the Clip History. Save as User Settings
is implicitly enabled when the Colour Settings box is set to User,
or RSX or User.
Colour
Science boxSet the version of the RED codec to use. Using
the version 3 of the codec gives you access to the FLUT and the
Shadow options in the Image menu, as well as version 3-only colour
spaces and gamma curves.
NoteAs a rule, always
set Colour Science to Codec 3.x, unless you are working with a file
shot using a RED camera with firmware 30 which, and that file was
imported in Flame prior to version 2011.
Colour
Space box Set the color space of the imported clips.
Gamma
Curve box Set the value of the output gamma curve that
is applied to the imported clips.
