Show in Contents

Add to Favorites

Home: Smoke

 

Viewing Reference Clips

Changing Colour Corrector Settings

Saving Colour Correction Setups and Preferences

 

Effects > Colour Corrector > Changing Colour Corrector Settings > 

Resetting Colour Corrections

You can reset colour corrections created with the Colour Corrector, the Colour Warper, or both. You can also reset the corrections you make inside the Colour Corrector using the basics menu, or by using the Range, Histogram, or Curve graphs.

To reset a colour correction:

1. Select an option from the Reset box on the right.

   Select:	To reset:
   Reset All	The entire module. Both the Colour Corrector and Colour Warper settings are reset to their default values.
   Reset CC	The Colour Corrector. Settings in the Colour Warper are not affected.
   Reset CW	The Colour Warper. Settings in the Colour Corrector are not affected.

   NoteIf accessing the Colour Corrector or the Colour Warper as a soft effect, only Reset All is available.
2. Click Confirm.

To reset a colour correction within the Colour Corrector:

1. Select an option from the Reset box on the left.

   Select:	To reset:
   Reset Basics	The basic properties of the Colour Corrector. Any changes made using the Curve, Histogram, or Range charts are unaffected.
   Reset Curve	The settings defined by the Curve chart. The Basic properties of the Colour Corrector are unaffected.
   Reset Histo	The settings defined by the Histogram. The Basic properties of the Colour Corrector are unaffected.
   Reset Range	The settings defined by the Range chart. The Basic properties of the Colour Corrector are unaffected.