Show in Contents
Add to Favorites
Home: Lustre
How to Use this Chapter
Lustre Workflow
Setting Up Users and Projects
Image Processing Pipeline
In Lustre,
image processing order is pre-determined—the order in which
you perform image processing tasks does not change the order in which
they are processed. You can perform these tasks on different stations simultaneously
and get the same results. For example, if you apply an input LUT
to a shot from a Lustre Station, it will be processed before the
colour grading effects created on the Master Station are processed,
regardless of the order in which you apply them.
Colour grading may occur
at the beginning, the end, or the beginning and end of the post-production
process. In Lustre, the order in which you create image processing
effects parallels the different stages in the post-production process.
Each task corresponds to a menu.
The image processing is as follows:
- The application of a CDL from the CDL
menu.
- The application of input LUTs from the
Input LUT menu.
- Initial primary colour grading from the
Grading menu (with the Input button enabled).
- RGB and Hue curves colour grading from
the Curves menu.
- Secondary colour grading from the Secondaries
menu.
- Sparks plugin effects from the Effects
menu.
- RGB curves colour grading from the Curves
menu.
- Final primary colour grading from the
Primary menu (with the Output button enabled).
- The application of output LUTs from the
Render | Output menu.
NoteDust removal operations
are processed separately. Shots where artefacts have been removed
are not updated in other menus until you render.