The Autodesk Control Surface > Working with the Grade Bin > 
Saving a Grade to the Grade Bin
 
 
 

Use Grade Save mode to save one or more grades to the Grade bin.

To save a grade to the Grade bin:

  1. On the Storyboard, use the ring to navigate to the shot with the grade you want to save.
    TipThis step can also be performed after you enter Grade Save mode.
  2. Press the Grade button on the Navigation panel.

    This activates Grade Save mode.

  3. To select a storage container in the Grade bin, do one of the following:
  4. To save the shot's grade to the storage container, double-press the keypad number button that corresponds to the desired Grade bin container.

    After the grade is saved, you are still in Grade Save mode and can save other grades. Use the trackball ring to navigate to other shots.

  5. To exit Grade Save mode, press Grade.