Show in Contents
Add to Favorites
Home: Autodesk Maya Online Help
Create arcs
Creating NURBS curves
Create a degree 3 curve to match degree 1 (scan) data
Create a fillet curve between
two existing curves
You
can create a circular or freeform fillet. The freeform fillet offers
more position and shape control.
To
create a circular fillet curve between two curves
- Select curve points on each curve about
where you want the fillet to begin and end. (The radius you enter
for the fillet will determine the actual start and end points.)
- Select
Edit Curves > Curve Fillet > .
- Click Circular and
enter the Radius for the fillet.
- To trim the curves back to the fillet
end points, turn on Trim. When Trim is
on, you can also turn on Join to join
the curves together into one new curve.
- Click Apply.
To
create a freeform fillet curve between two curves
- Select a curve point on each curve to
specify the start and end points of the fillet.
- Select
Edit Curves > Curve Fillet > .
- Click Freeform.
- To trim the curves back to the fillet
end points, turn on Trim. When Trim is
on, you can also turn on Join to join
the curves together into one new curve.
- Click Apply.
NoteYou cannot create
a fillet using a curve-on-surface.
What if...?
Maya does not create a fillet curve?
- Do one of the following:
- Maya may not create a curve if its not
possible to fillet the selected curve with the radius you entered.
Try entering a different radius and click Apply again.
- Try reshaping the curves so they intersect.