quadricShape.cpp

//-
// ==========================================================================
// Copyright 1995,2006,2008 Autodesk, Inc. All rights reserved.
//
// Use of this software is subject to the terms of the Autodesk
// license agreement provided at the time of installation or download,
// or which otherwise accompanies this software in either electronic
// or hard copy form.
// ==========================================================================
//+

//
// quadricShape.cpp
//
// Description:
//    Registers a new type of shape with maya called "quadricShape".
//    This shape will display spheres, cylinders, disks, and partial disks
//    using the OpenGL gluQuadric functions.
//
//    There are no output attributes for this shape.
//    The following input attributes define the type of shape to draw.
//
//       shapeType  : 0=cylinder, 1=disk, 2=partialDisk, 3=sphere
//       radius1        : cylinder base radius, disk inner radius, sphere radius
//       radius2        : cylinder top radius, disk outer radius
//       height         : cylinder height
//       startAngle     : partial disk start angle
//       sweepAngle     : partial disk sweep angle
//       slices         : cylinder, disk, sphere slices
//       loops          : disk loops
//       stacks         : cylinder, sphere stacks
//

#include <maya/MIOStream.h>
#include <maya/MPxSurfaceShape.h>
#include <maya/MPxSurfaceShapeUI.h>
#include <maya/MFnPlugin.h>
#include <maya/MFnNumericAttribute.h>
#include <maya/MFnEnumAttribute.h>
#include <maya/MPoint.h>
#include <maya/MPlug.h>
#include <maya/MDrawData.h>
#include <maya/MDrawRequest.h>
#include <maya/MSelectionMask.h>
#include <maya/MSelectionList.h>
#include <maya/MDagPath.h>
#include <maya/MMaterial.h>
#if defined(OSMac_MachO_)
#include <OpenGL/glu.h>
#else
#include <GL/glu.h>
#endif


#define MCHECKERROR(STAT,MSG)       \
    if ( MS::kSuccess != STAT ) {   \
        cerr << MSG << endl;        \
        return MS::kFailure;        \
    }

#define MAKE_NUMERIC_ATTR( NAME, SHORTNAME, TYPE, DEFAULT, KEYABLE ) \
        MStatus NAME##_stat;                                             \
        MFnNumericAttribute NAME##_fn;                                   \
        NAME = NAME##_fn.create( #NAME, SHORTNAME, TYPE, DEFAULT );      \
        MCHECKERROR(NAME##_stat, "numeric attr create error");               \
        NAME##_fn.setHidden( !KEYABLE );                                                                 \
        NAME##_fn.setKeyable( KEYABLE );                                                                 \
        NAME##_fn.setInternal( true );                                                                   \
        NAME##_stat = addAttribute( NAME );                              \
        MCHECKERROR(NAME##_stat, "addAttribute error");

#define LEAD_COLOR                              18      // green
#define ACTIVE_COLOR                    15      // white
#define ACTIVE_AFFECTED_COLOR   8       // purple
#define DORMANT_COLOR                   4       // blue
#define HILITE_COLOR                    17      // pale blue

//
// Geometry class
//
class quadricGeom 
{
public:
        double radius1;
        double radius2;
        double height;
        double startAngle;
        double sweepAngle;
        short slices;
        short loops;
        short stacks;
    short shapeType;
};

//
// Shape class - defines the non-UI part of a shape node
//
class quadricShape : public MPxSurfaceShape
{
public:
        quadricShape();
        virtual ~quadricShape(); 

        virtual void                    postConstructor();
        virtual MStatus                 compute( const MPlug&, MDataBlock& );
    virtual bool                        getInternalValue( const MPlug&,
                                                                                          MDataHandle& );
    virtual bool                        setInternalValue( const MPlug&,
                                                                                          const MDataHandle& );
                                          
        virtual bool            isBounded() const;
        virtual MBoundingBox    boundingBox() const; 

        static  void *          creator();
        static  MStatus         initialize();
        quadricGeom*            geometry();

private:
        quadricGeom*            fGeometry;

        // Attributes
        //
    static  MObject     shapeType;
        static  MObject         radius1;
        static  MObject         radius2;
        static  MObject         height;
        static  MObject         startAngle;
        static  MObject         sweepAngle;
        static  MObject         slices;
        static  MObject         loops;
        static  MObject         stacks;
 
public:
        // Shape type id
        //
        static  MTypeId         id;
};

//
// UI class     - defines the UI part of a shape node
//
class quadricShapeUI : public MPxSurfaceShapeUI
{
public:
        quadricShapeUI();
        virtual ~quadricShapeUI(); 

        virtual void    getDrawRequests( const MDrawInfo & info,
                                                                         bool objectAndActiveOnly,
                                                                         MDrawRequestQueue & requests );
        virtual void    draw( const MDrawRequest & request,
                                                  M3dView & view ) const;
        virtual bool    select( MSelectInfo &selectInfo,
                                                        MSelectionList &selectionList,
                                                        MPointArray &worldSpaceSelectPts ) const;

        void                    getDrawRequestsWireframe( MDrawRequest&,
                                                                                          const MDrawInfo& );
        void                    getDrawRequestsShaded(    MDrawRequest&,
                                                                                          const MDrawInfo&,
                                                                                          MDrawRequestQueue&,
                                                                                          MDrawData& data );

        static  void *  creator();

private:
        enum {
                kDrawCylinder,
                kDrawDisk,
                kDrawPartialDisk,
                kDrawSphere
        };

        // Draw Tokens
        //
        enum {
                kDrawWireframe,
                kDrawWireframeOnShaded,
                kDrawSmoothShaded,
                kDrawFlatShaded,
                kLastToken
        };
};

// SHAPE NODE IMPLEMENTATION

MObject quadricShape::shapeType;
MObject quadricShape::radius1;
MObject quadricShape::radius2;
MObject quadricShape::height;
MObject quadricShape::startAngle;
MObject quadricShape::sweepAngle;
MObject quadricShape::slices;
MObject quadricShape::loops;
MObject quadricShape::stacks;
MTypeId quadricShape::id( 0x80111 );

quadricShape::quadricShape()
{
        fGeometry = new quadricGeom;
        fGeometry->radius1              = 1.0;
        fGeometry->radius2              = 1.0;
        fGeometry->height               = 2.0;
        fGeometry->startAngle   = 0.0;
        fGeometry->sweepAngle   = 90.0;
        fGeometry->slices               = 8;
        fGeometry->loops                = 6;
        fGeometry->stacks               = 4;
    fGeometry->shapeType        = 0;
}

quadricShape::~quadricShape()
{
        delete fGeometry;
}

/* override */
void quadricShape::postConstructor()
//
// Description
// 
//    When instances of this node are created internally, the MObject associated
//    with the instance is not created until after the constructor of this class
//    is called. This means that no member functions of MPxSurfaceShape can
//    be called in the constructor.
//    The postConstructor solves this problem. Maya will call this function
//    after the internal object has been created.
//    As a general rule do all of your initialization in the postConstructor.
//
{ 
        // This call allows the shape to have shading groups assigned
        //
        setRenderable( true );
}

/* override */
MStatus quadricShape::compute( const MPlug& /*plug*/, MDataBlock& /*datablock*/ )
//
// Since there are no output attributes this is not necessary but
// if we wanted to compute an output mesh for rendering it would
// be done here base on the inputs.
//
{ 
        return MS::kUnknownParameter;
}

/* override */
bool quadricShape::getInternalValue( const MPlug& plug,
                                                                         MDataHandle& datahandle )
//
// Handle internal attributes.
// In order to impose limits on our attribute values we
// mark them internal and use the values in fGeometry intead.
//
{
        bool isOk = true;

        if ( plug == radius1 ) {
                datahandle.set( fGeometry->radius1 );
                isOk = true;
        }
        else if ( plug == radius2 ) {
                datahandle.set( fGeometry->radius2 );
                isOk = true;
        }
        else if ( plug == height ) {
                datahandle.set( fGeometry->height );
                isOk = true;
        }
        else if ( plug == startAngle ) {
                datahandle.set( fGeometry->startAngle );
                isOk = true;
        }
        else if ( plug == sweepAngle ) {
                datahandle.set( fGeometry->sweepAngle );
                isOk = true;
        }
        else if ( plug == slices ) {
                datahandle.set( fGeometry->slices );
                isOk = true;
        }
        else if ( plug == loops ) {
                datahandle.set( fGeometry->loops );
                isOk = true;
        }
        else if ( plug == stacks ) {
                datahandle.set( fGeometry->stacks );
                isOk = true;
        }
        else {
                isOk = MPxSurfaceShape::getInternalValue( plug, datahandle );
        }

        return isOk;
}
/* override */
bool quadricShape::setInternalValue( const MPlug& plug,
                                                                         const MDataHandle& datahandle )
//
// Handle internal attributes.
// In order to impose limits on our attribute values we
// mark them internal and use the values in fGeometry intead.
//
{
        bool isOk = true;

        // In the case of a disk or partial disk the inner radius must
        // never exceed the outer radius and the minimum radius is 0
        //
        if ( plug == radius1 ) {
                double innerRadius = datahandle.asDouble();
                double outerRadius = fGeometry->radius2;

                if ( innerRadius > outerRadius ) {
                        outerRadius = innerRadius;
                }

                if ( innerRadius < 0 ) {
                        innerRadius = 0;
                }

                fGeometry->radius1 = innerRadius;
                fGeometry->radius2 = outerRadius;
                isOk = true;
        }
        else if ( plug == radius2 ) {
                double outerRadius = datahandle.asDouble();
                double innerRadius = fGeometry->radius1;

                if ( outerRadius <= 0 ) {
                        outerRadius = 0.1;
                }

                if ( innerRadius > outerRadius ) {
                        innerRadius = outerRadius;
                }

                if ( innerRadius < 0 ) {
                        innerRadius = 0;
                }

                fGeometry->radius1 = innerRadius;
                fGeometry->radius2 = outerRadius;
                isOk = true;
        }
        else if ( plug == height ) {
                double val = datahandle.asDouble();
                if ( val <= 0 ) {
                        val = 0.1;
                }
                fGeometry->height = val;
        }
        else if ( plug == startAngle ) {
                double val = datahandle.asDouble();
                fGeometry->startAngle = val;
        }
        else if ( plug == sweepAngle ) {
                double val = datahandle.asDouble();
                fGeometry->sweepAngle = val;
        }
        else if ( plug == slices ) {
                short val = datahandle.asShort();
                if ( val < 3 ) {
                        val = 3;
                }
                fGeometry->slices = val;
        }
        else if ( plug == loops ) {
                short val = datahandle.asShort();
                if ( val < 3 ) {
                        val = 3;
                }
                fGeometry->loops = val;
        }
        else if ( plug == stacks ) {
                short val = datahandle.asShort();
                if ( val < 2 ) {
                        val = 2;
                }
                fGeometry->stacks = val;
        }
        else {
                isOk = MPxSurfaceShape::setInternalValue( plug, datahandle );
        }

        return isOk;
}

/* override */
bool quadricShape::isBounded() const { return true; }

/* override */
MBoundingBox quadricShape::boundingBox() const
//
// Returns the bounding box for the shape.
// In this case just use the radius and height attributes
// to determine the bounding box.
//
{
        MBoundingBox result;    
        quadricShape* nonConstThis = const_cast <quadricShape*> (this);
        quadricGeom* geom = nonConstThis->geometry();

        double r = geom->radius1;
        result.expand( MPoint(r,r,r) ); result.expand( MPoint(-r,-r,-r) );
        r = geom->radius2;
        result.expand( MPoint(r,r,r) ); result.expand( MPoint(-r,-r,-r) );
        r = geom->height;
        result.expand( MPoint(r,r,r) ); result.expand( MPoint(-r,-r,-r) );

    return result;
}

void* quadricShape::creator()
{
        return new quadricShape();
}

MStatus quadricShape::initialize()
{ 
        MStatus                         stat;
    MFnNumericAttribute numericAttr;
    MFnEnumAttribute    enumAttr;

        // QUADRIC type enumerated attribute
        //
        shapeType = enumAttr.create( "shapeType", "st", 0, &stat );
        MCHECKERROR( stat, "create shapeType attribute" );
                enumAttr.addField( "cylinder", 0 );
                enumAttr.addField( "disk", 1 );
                enumAttr.addField( "partialDisk", 2 );
                enumAttr.addField( "sphere", 3 );
        enumAttr.setHidden( false );
        enumAttr.setKeyable( true );
        stat = addAttribute( shapeType );
        MCHECKERROR( stat, "Error adding shapeType attribute." );
        
        // QUADRIC ATTRIBUTES
        //
        MAKE_NUMERIC_ATTR( radius1, "r1", MFnNumericData::kDouble, 1.0, true );
        MAKE_NUMERIC_ATTR( radius2, "r2", MFnNumericData::kDouble, 1.0, true );
        MAKE_NUMERIC_ATTR( height, "ht", MFnNumericData::kDouble, 2.0, true );
        MAKE_NUMERIC_ATTR( startAngle, "sta", MFnNumericData::kDouble, 0.0, true );
        MAKE_NUMERIC_ATTR( sweepAngle, "swa", MFnNumericData::kDouble, 90.0, true );
        MAKE_NUMERIC_ATTR( slices, "sl", MFnNumericData::kShort, 8, true );
        MAKE_NUMERIC_ATTR( loops, "lp", MFnNumericData::kShort, 6, true );
        MAKE_NUMERIC_ATTR( stacks, "sk", MFnNumericData::kShort, 4, true );

        return stat;
}

quadricGeom* quadricShape::geometry()
//
// This function gets the values of all the attributes and
// assigns them to the fGeometry. Calling MPlug::getValue
// will ensure that the values are up-to-date.
//
{
        MObject this_object = thisMObject();
        MPlug plug( this_object, radius1 );     plug.getValue( fGeometry->radius1 );
        plug.setAttribute( radius2 );           plug.getValue( fGeometry->radius2 );
        plug.setAttribute( height );            plug.getValue( fGeometry->height );
        plug.setAttribute( startAngle );        plug.getValue( fGeometry->startAngle );
        plug.setAttribute( sweepAngle );        plug.getValue( fGeometry->sweepAngle );
        plug.setAttribute( slices );            plug.getValue( fGeometry->slices );
        plug.setAttribute( loops );                     plug.getValue( fGeometry->loops );
        plug.setAttribute( stacks );            plug.getValue( fGeometry->stacks );
        plug.setAttribute( shapeType );         plug.getValue( fGeometry->shapeType );

        return fGeometry;
}

// UI IMPLEMENTATION

quadricShapeUI::quadricShapeUI() {}
quadricShapeUI::~quadricShapeUI() {}

void* quadricShapeUI::creator()
{
        return new quadricShapeUI();
}

/* override */
void quadricShapeUI::getDrawRequests( const MDrawInfo & info,
                                                         bool /*objectAndActiveOnly*/,
                                                         MDrawRequestQueue & queue )
{
        // The draw data is used to pass geometry through the 
        // draw queue. The data should hold all the information
        // needed to draw the shape.
        //
        MDrawData data;
        MDrawRequest request = info.getPrototype( *this );
        quadricShape* shapeNode = (quadricShape*)surfaceShape();
        quadricGeom* geom = shapeNode->geometry();
        getDrawData( geom, data );
        request.setDrawData( data );

        // Are we displaying meshes?
        if ( ! info.objectDisplayStatus( M3dView::kDisplayMeshes ) )
                return;

        // Use display status to determine what color to draw the object
        //
        switch ( info.displayStyle() )
        {                
                case M3dView::kWireFrame :
                        getDrawRequestsWireframe( request, info );
                        queue.add( request );
                        break;
                
                case M3dView::kGouraudShaded :
                        request.setToken( kDrawSmoothShaded );
                        getDrawRequestsShaded( request, info, queue, data );
                        queue.add( request );
                        break;
                
                case M3dView::kFlatShaded :
                        request.setToken( kDrawFlatShaded );
                        getDrawRequestsShaded( request, info, queue, data );
                        queue.add( request );
                        break;
                default:        
                        break;
        }
}

/* override */
void quadricShapeUI::draw( const MDrawRequest & request, M3dView & view ) const
//
// From the given draw request, get the draw data and determine
// which quadric to draw and with what values.
//
{       
        MDrawData data = request.drawData();
        quadricGeom * geom = (quadricGeom*)data.geometry();
        int token = request.token();
        bool drawTexture = false;

        view.beginGL(); 

        if ( (token == kDrawSmoothShaded) || (token == kDrawFlatShaded) )
        {
#if             defined(SGI) || defined(MESA)
                glEnable( GL_POLYGON_OFFSET_EXT );
#else
                glEnable( GL_POLYGON_OFFSET_FILL );
#endif
                // Set up the material
                //
                MMaterial material = request.material();
                material.setMaterial( request.multiPath(), request.isTransparent() );

                // Enable texturing
                //
                drawTexture = material.materialIsTextured();
                if ( drawTexture ) glEnable(GL_TEXTURE_2D);

                // Apply the texture to the current view
                //
                if ( drawTexture ) {
                        material.applyTexture( view, data );
                }
        }

        GLUquadricObj* qobj = gluNewQuadric();

        switch( token )
        {
                case kDrawWireframe :
                case kDrawWireframeOnShaded :
                        gluQuadricDrawStyle( qobj, GLU_LINE );
                        break;

                case kDrawSmoothShaded :
                        gluQuadricNormals( qobj, GLU_SMOOTH );
                        gluQuadricTexture( qobj, true );
                        gluQuadricDrawStyle( qobj, GLU_FILL );
                        break;

                case kDrawFlatShaded :
                        gluQuadricNormals( qobj, GLU_FLAT );
                        gluQuadricTexture( qobj, true );
                        gluQuadricDrawStyle( qobj, GLU_FILL );
                        break;
        }

        switch ( geom->shapeType )
        {
        case kDrawCylinder :
                gluCylinder( qobj, geom->radius1, geom->radius2, geom->height,
                                         geom->slices, geom->stacks );
                break;
        case kDrawDisk :
                gluDisk( qobj, geom->radius1, geom->radius2, geom->slices, geom->loops );
                break;
        case kDrawPartialDisk :
                gluPartialDisk( qobj, geom->radius1, geom->radius2, geom->slices,
                                                geom->loops, geom->startAngle, geom->sweepAngle );
                break;
        case kDrawSphere : 
        default :
                gluSphere( qobj, geom->radius1, geom->slices, geom->stacks );
                break;
        }

        // Turn off texture mode
        //
        if ( drawTexture ) glDisable(GL_TEXTURE_2D);

        view.endGL(); 
}

/* override */
bool quadricShapeUI::select( MSelectInfo &selectInfo,
                                                         MSelectionList &selectionList,
                                                         MPointArray &worldSpaceSelectPts ) const
//
// Select function. Gets called when the bbox for the object is selected.
// This function just selects the object without doing any intersection tests.
//
{
        MSelectionMask priorityMask( MSelectionMask::kSelectObjectsMask );
        MSelectionList item;
        item.add( selectInfo.selectPath() );
        MPoint xformedPt;
        selectInfo.addSelection( item, xformedPt, selectionList,
                                                         worldSpaceSelectPts, priorityMask, false );
        return true;
}

void quadricShapeUI::getDrawRequestsWireframe( MDrawRequest& request,
                                                                                           const MDrawInfo& info )
{
        request.setToken( kDrawWireframe );

        M3dView::DisplayStatus displayStatus = info.displayStatus();
        M3dView::ColorTable activeColorTable = M3dView::kActiveColors;
        M3dView::ColorTable dormantColorTable = M3dView::kDormantColors;
        switch ( displayStatus )
        {
                case M3dView::kLead :
                        request.setColor( LEAD_COLOR, activeColorTable );
                        break;
                case M3dView::kActive :
                        request.setColor( ACTIVE_COLOR, activeColorTable );
                        break;
                case M3dView::kActiveAffected :
                        request.setColor( ACTIVE_AFFECTED_COLOR, activeColorTable );
                        break;
                case M3dView::kDormant :
                        request.setColor( DORMANT_COLOR, dormantColorTable );
                        break;
                case M3dView::kHilite :
                        request.setColor( HILITE_COLOR, activeColorTable );
                        break;
                default:        
                        break;
        }
}

void quadricShapeUI::getDrawRequestsShaded( MDrawRequest& request,
                                                                                        const MDrawInfo& info,
                                                                                        MDrawRequestQueue& queue,
                                                                                        MDrawData& data )
{
        // Need to get the material info
        //
        MDagPath path = info.multiPath();       // path to your dag object 
        M3dView view = info.view();;            // view to draw to
        MMaterial material = MPxSurfaceShapeUI::material( path );
        M3dView::DisplayStatus displayStatus = info.displayStatus();

        // Evaluate the material and if necessary, the texture.
        //
        if ( ! material.evaluateMaterial( view, path ) ) {
                cerr << "Couldnt evaluate\n";
        }

        bool drawTexture = true;
        if ( drawTexture && material.materialIsTextured() ) {
                material.evaluateTexture( data );
        }

        request.setMaterial( material );

        bool materialTransparent = false;
        material.getHasTransparency( materialTransparent );
        if ( materialTransparent ) {
                request.setIsTransparent( true );
        }
        
        // create a draw request for wireframe on shaded if
        // necessary.
        //
        if ( (displayStatus == M3dView::kActive) ||
                 (displayStatus == M3dView::kLead) ||
                 (displayStatus == M3dView::kHilite) )
        {
                MDrawRequest wireRequest = info.getPrototype( *this );
                wireRequest.setDrawData( data );
                getDrawRequestsWireframe( wireRequest, info );
                wireRequest.setToken( kDrawWireframeOnShaded );
                wireRequest.setDisplayStyle( M3dView::kWireFrame );
                queue.add( wireRequest );
        }
}


MStatus initializePlugin( MObject obj )
{ 
        MFnPlugin plugin( obj, PLUGIN_COMPANY, "3.0", "Any");
        return plugin.registerShape( "quadricShape", quadricShape::id,
                                                                   &quadricShape::creator,
                                                                   &quadricShape::initialize,
                                                                   &quadricShapeUI::creator  );
}

MStatus uninitializePlugin( MObject obj)
{
        MFnPlugin plugin( obj );
        return plugin.deregisterNode( quadricShape::id );
}

Autodesk® Maya® 2009 © 1997-2008 Autodesk, Inc. All rights reserved. Generated with doxygen 1.5.6