| Shape | Shape
Constrains the endpoints of two curves together.
To apply: See Stitching Curves [Surface and Curve Modeling].
To redisplay: Select either curve then choose and click the tab.
Clean
|
|
The maximum allowable error for calculating the stitch.
|
Shape
|
|
The continuity at the point where the curves meet:
-
. The seam may have a sharp point.
-
. The tangent at the seam does not change abruptly.
-
. Neither the tangent nor the curvature at the seam changes abruptly.
|
|
|
The location of the seam between the curves.
-
. The seam is located at the endpoint of the first curve.
-
. The seam is located at the endpoint of the second curve.
-
. The seam is located midway between the curves.
|
|
|
Specifies the curves whose tangents are modified to maintain continuity.
-
. The tangent of the first curve is modified.
-
. The tangent of the second curve is modified.
-
. The tangents of both curves are modified.
|
Start, End Curve
These parameters affect the blending between the two curves.
|
|
Affects the position where blending begins on the corresponding curve.
|
|
|
Affects the extent of the influence of the curve on the blend.
|
Properties 
Except where otherwise noted, this work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 3.0 Unported License
