| Clean | Shape
Stitches a boundary of one surface to the boundary of another.
To apply: See Stitching Surfaces [Surface and Curve Modeling].
To redisplay: Select the stitched surface then choose and click the tab.
Clean
|
|
The allowable error for calculating the stitch.
|
Shape
|
|
The continuity at the seam between the surfaces:
-
The seam may have a sharp point.
-
. The tangent at the seam does not change abruptly.
-
. Neither the tangent nor the curvature at the seam changes abruptly.
|
|
|
The location of the seam between the two surfaces:
-
. The seam is at the boundary of the first surface.
-
. The seam is at the boundary of the second surface.
-
. The seam is midway between the surfaces.
-
. The seam is at the curve you picked when you applied the command.
|
|
|
The surfaces whose tangents are adjusted to maintain the continuity. This option is not available if is .
-
Only the tangent of the first surface is modified.
-
Only the tangent of the second surface is modified.
-
The tangents of both surfaces are modified.
|
Start, End Surface
These parameters affect the blending between the two surfaces.
|
|
Affects the position where blending begins on the corresponding surface.
|
|
|
Affects the extent of the influence of the surface on the blend.
|
Properties 
