Set the Wacom tablet properties

Mudbox uses a three-button mouse configuration for camera actions similar to Maya. You'll need to configure the upper and lower side switches on your Wacom pen so they act in a similar manner to the right and middle buttons on the mouse.

The following instructions provide two options for configuring the behavior of the side switches on your Wacom pen. Choose the option that best suits your workflow requirements.

Option 1

The following instructions describe how to set the pen properties for the middle and right-click functions (Track and Dolly) when the Alt key is pressed and the pen tip is positioned within 0.25 inches above the tablet surface and moved in a sideways or up and down motion.

Note The Track and Dolly functions do not work if the pen tip touches the tablet surface with this option.

To view and edit the Wacom tablet properties:
- (Windows) From the Control Panel, open the Wacom Tablet Properties.
- (Mac OS X) From the Apple menu, select System Preferences and click Wacom Tablet.
- (Linux) See Tablet setup on Linux.
Modify the properties so that the Right Click and Middle Click functions are configured on the side switches of the pen barrel, as follows:

Camera actions with this setup work as follows:

Camera Action	Mouse Action	Pen Tablet Action
Tumble	Alt + left-drag	Alt + drag on the tablet surface. The camera tumbles about its center of interest in the 3D view.
Track	Alt + middle-drag	Alt + middle-drag, moving the pen sideways with the pen tip positioned slightly above the tablet surface. The camera moves sideways or up and down in the 3D view.
Dolly	Alt + right-drag	Alt + right-drag, moving the pen sideways with the pen tip positioned slightly above the tablet surface. The camera moves towards or away from its center of interest in the 3D view.

Option 2

If you find that hovering the pen above the surface of the tablet is awkward for middle and right-click camera actions, you can configure the Wacom pen tablet using the following method. With this option you must first press down the side switch and then click with the pen tip on the tablet surface to perform any click function (right-click, middle-click) assigned to the side switch.

Perform the instructions described in Option 1. See To set the Wacom tablet properties - option 1.
In the Wacom Tablet Properties window, select Options.
In the Options window turn on the Click and Tap option (on some versions this is also called the Side Switch Expert Mode option).

Camera actions with this setup work as follows:

Camera Action	Mouse Action	Pen Tablet Action
Tumble	Alt + left-drag	Press the Alt key then drag the pen tip on the tablet surface. The camera tumbles about its center of interest in the 3D view.
Track	Alt + middle-drag	Press the Alt key then press the side switch on the pen barrel for the middle button. Apply the pen tip to the tablet surface. Then move the pen sideways or up and down. The camera moves sideways or up and down in the 3D view.
Dolly	Alt + right-drag	Press the Alt key then press the side switch on the pen barrel for the right button. Apply the pen tip to the tablet surface. Then move the pen sideways. The camera moves towards or away from its center of interest in the 3D view.

Except where otherwise noted, this work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 3.0 Unported License