Displacement Map Extraction options

Displays the name of the model to receive the extracted map. The map produced will represent the difference between this model (low resolution) and the source model(s) (high resolution).

The target model is usually the lowest subdivision level of a model with multiple subdivision levels. You can click the displayed subdivision level (next to the target model name) to select a different subdivision level from a drop-down list.

Use the Add All, Add Selected, and Remove buttons to change the model listed as the target.

Smooth Target Model

On by default. Uses a smoothed version of the target model (low resolution) for map extraction calculations. Turn off if you are extracting texture maps for games applications where a smoothed model is not used.

Smooth Target UVs

Smooths the positions of interior UVs of the target model during the texture extraction. Smooth Target UVs only smooths when the Smooth Target Model option is on.

This can be useful if your image rendering software (for example, Pixar’s RenderMan^®) can smooth the UV texture coordinates on a mesh during rendering to improve the results.

Use Creases & Hard Edges

For target models with creasing or hard edge data (see Import and export objects with creasing and hard edges), lets you set how Mudbox handles the creasing information when extracting texture maps.

When on, Use Creases & Hard Edges affects the operation of other map extraction options. If you are smoothing your target mesh (Smooth Target Models is on), it ensures that the creases are maintained in the smoothed mesh. If you are using Ray Casting, it ensures that vertex normals are used to map the surface together (rather than face normals). If you are creating a normal map, it ensures that the local tangent space calculation takes the creases and edges into account, rather than interpolating smoothly over the model.

Lists the model(s) to extract maps from. The source model (high resolution) typically contains the sculpted details to be extracted into the map(s). This model does not require UV texture coordinates.

You can click the displayed subdivision level (next to the source model name) to select a different subdivision level from a drop-down list. Use the Add All, Add Selected, and Remove buttons to change the model listed as the source

Smooth Source Model

On by default. Subdivides the source model and uses the smoothed version for map extraction calculations. This option is useful for most texture extraction applications.

(Available only when you set Map Type to Texture.)

Generate one map for all targets

Use this option when extracting to multiple targets if you want one map generated (for each extraction type selected) that can be shared by all target models. This is useful for conserving the number of texture maps when multiple objects share one UV tile.

ImportantWhen generating one map for multiple targets that share the same UV tile, ensure the models do not have overlapping UVs.

Generate one map for each target

Use this option when extracting to multiple targets if you want one map extracted for each individual target model. This is useful when the target models use different materials or when the UV texture coordinates occupy the same UV tile location and producing one shared map would not be possible.

Image Size

Specifies the height and width in pixels of the output map(s).

NoteA larger Image Size produces more detail in the map, but increases extraction time and file size.

Antialiasing

When on, improves the quality of the final extracted image map by applying a filter comparison between pixels in the image. Higher values increase the amount of antialiasing that occurs and the time to extract the image map. For initial test extractions, use a small Image Size value and leave the Antialiasing property turned off until you produce a final image.

(Available only when you set Map Type to Ptex.)

Set these options to determine the number of texels in your final map, and how they are distributed across the mesh.

Density

Default is 0.5.

Number of Texels

Lets you enter the desired number of texture samples (texels) for the extracted map. (Default is 100 000.)

NoteNot available if Texel Distribution is set to Use PTEX Setup.

Texel Distribution

Lets you control how texels are distributed over the surface. Select from the following options:

Normalize to Search Distance

Remaps the results of the extraction samples into 0 to 1 color space for displacement maps when Bits per Channel is 8 or 16 bit. Normal maps always use -1 to 1 range.

Preview As Bump Map

Automatically imports the generated displacement map as a new paint layer within the Bump Map channel of the assigned material. This lets you preview the displacement map on the selected model(s) and iterate the generated map with different settings if required.

When off, the extracted displacement map is saved to the directory you specify without displaying as a paint layer on the model.

Map Type

Lets you specify whether to extract a Texture map or a Ptex file.

The other Output options available change depending on which type you select.

Available when Map Type is set to Texture:

Base File Name

Enter a name for the extracted map(s). To have Mudbox automatically append the target mesh name to your filename, use the wildcard characters %s.

ImportantIf you are extracting a map for multiple target meshes and Generate a map for each target is on, ensure that you use %s as part of your Base File Name. (Otherwise the map generated for each target will have the same name and overwrite the map output for the previous target.)

Click the browse icon to set save options (including file format) in the Save As window.

Note

If the model contains UVs within multiple UV tile spaces, that is, outside the 0 to 1 range, Mudbox automatically creates separate maps that correlate to each UV tile and saves to the directory you specify. For example, <basefilename>_u1_v1.bmp, <basefilename>_u2_v2.bmp, and so on.

Bits per Channel

When you select an image file type for your output map (click next to Base File Name to open the Save As options), this property indicates the color depth for the output map, based on the file type you specify.

Preview as

(Different Preview as options display depending on the type of map you're extracting. Refer to the options for each specific map type.)

Available when Map Type is set to Ptex:

Include Mesh Data

When on (default), Mudbox also saves general data about the mesh (vertex positions, list of faces, and so on) in the output PTEX file. This can be useful if other tools in your pipeline can use this type of PTEX data, for example if you will use a PTEX viewer to inspect the output file. It is recommended that you keep this option on when extracting PTEX files.

File Name

Enter a name for the extracted Ptex file.

Click the browse icon to change the default save location in the Save As window.

Note

If the model contains UVs within multiple UV tile spaces, that is, outside the 0 to 1 range, Mudbox automatically creates separate maps that correlate to each UV tile and saves to the directory you specify. For example, <basefilename>_u1_v1.bmp, <basefilename>_u2_v2.bmp, and so on.

Data Format

Depending on the type of map (or maps) you're generating, lets you specify the bit depth for the extracted Ptex file. (Options include 8 bit integer, 16 bit integer, 16 bit float, or 32 bit float.) The larger the bit depth you select, the higher the precision in the extracted files, and the larger the file size.