Edit Mesh > Cut Faces Tool

 
 
 

Splits all faces along a cut line. You can cut and delete faces or extract the faces

Related topics

Edit Mesh > Cut Faces Tool >

Cut Direction

Specifies how you want to cut faces.

Interactive

Displays a cutting line you can interactively position in the scene view to specify the location of the cut on the polygon mesh.

YZ, ZX, XY plane

Projects the cutting line along a plane and displays a manipulator for you to position the cut.

Delete cut faces

Deletes the portion of the surface to one side of the cutting line. When using the Interactive Cut setting, a dotted line perpendicular to the cut line appears to indicate the side that will be deleted.

Extract cut faces

Extracts faces to one side of the cutting line. When using the Interactive Cut Direction setting, a dotted line perpendicular to the cut line appears to indicate the side that will be extracted and offset.

Extract offset

Extract offset is available only when the Extract cut faces option is selected. Extract offset specifies the distance between the original surface and the cut and extracted piece. One practical use for this setting is to widen the model of a head. In this case, you would cut the model exactly down the center and use Extract Offset to position the extracted half further away, until the head seems wide enough. You would then fill in the gap to complete the head using Edit Mesh > Bridge.

polyCut node

Additional modifications can be made on a cut by editing the following attributes on the polyCut node using the Channel Box or Attribute Editor.

Cut Plane Center, Rotation, and Scale

These settings enable you to enter exact values for the orientation of the cutting line.