macCodec
(macc)
| Type of Codec on Mac. |
macDepth
(macd)| Type of Codec on Mac. |
macQual
(macq)| Type of Codec on Mac. |
comFrrt
(mcfr)| Frame rate information for compression |
renderAll
(ra)
| Render all (1) or just render active (0). |
ignoreFilmGate
(ifg)| If true, the film gate is respected if it intersects the viewport, if false, the film gate is ignored and every pixel is rendered. |
quality
(qual)| The Quality to be used for this Render (the node at other end of this message plug is a renderQuality node). |
resolution
(res)| The Resolution to be used for this Render (the node at other end of this message plug is a resolution node). |
clipFinalShadedColor
(clip)| if we should clamp the shader output |
enableDepthMaps
(edm)| Enable or Disable the depth map shadows. |
enableDefaultLight
(edl)| Toggles whether a default light is created for rendering when there are no lights in the scene. |
currentRenderer
(ren)| Current renderer |
enableStrokeRender
(esr)| Enable or Disable the rendering of Paint Effects Strokes. If true, the particle paint module must be present and there must be renderable strokes in the scene before it will really render the strokes. |
onlyRenderStrokes
(ors)| Only render Paint Effects Strokes - no geometry, depth file must be specified. |
strokesDepthFile
(sdf)| If we are only rendering strokes, this depth file (plus possible extensions) is used for depth masking. |
imageFormat
(outf)| Specifies the output image file format - choices: GIF (0), SI (1), RLA (2), Tiff (3), Tiff16 (4), SGI (5), Alias (6) IFF (7) JPEG (8) EPS (9) IFF16 (10) Cineon (11) Quantel (12) SGI16 (13) TARGA (19) BMP (20) SGIMV (21) QT (22) AVI (23) MACPAINT (30) PHOTOSHOP (31) PNG (32) QUICKDRAW (33) QTIMAGE (34) DDS (35) DDS (36) IMFplugin (50) Custom (51) SWF (60) AI (61) SVG (62) SWFT (63) |
imfPluginKey
(imfkey)| IMF plugin keyword |
gammaCorrection
(gama)| Gamma correction value. |
topRegion
(top)| The top 2d coord of render region (for use if useRenderRegion is true). |
leftRegion
(left)| The left 2d coord of render region (for use if useRenderRegion is true). |
bottomRegion
(bot)| The bottom 2d coord of render region (for use if useRenderRegion is true). |
rightRegion
(rght)| The right 2d coord of render region (for use if useRenderRegion is true). |
useRenderRegion
(urr)| Use the render region (use the previous coordinates if true (1)). |
animation
(an)| Render an animation (if true) or just the current frame (if false). |
animationRange
(ar)| Use the frame range from renderGlobals (0), or time slider (1). |
startFrame
(fs)| The renderGlobals starting frame value. |
endFrame
(ef)| The renderGlobals ending frame value. |
byFrame
(bf)| The renderGlobals frame step ('by' or increment) value. This is no longer used, but kept for backwards compatibility. |
byFrameStep
(bfs)| Unitless (floating point) by frame. |
modifyExtension
(me)| Should start and by output image filename extension modifiers be used? (false-> use the current frame value as the filename extension, true->use startExtension + ((currentFrame-startFrame)/byFrame) * byExtension value as the filename extension). |
startExtension
(se)| The starting output image filename extension value. |
byExtension
(be)| The output image filename extension step ('by' or increment) value. |
extensionPadding
(ep)| The number of digits in the output image filename extension (3 -> "image.001"). |
fieldExtControl
(fec)| Controls the type of filename extension to be used for fields: o/e (0), no extension (Caution! Do not use with when interlace set to 'both'.) (1), user input (2) |
outFormatControl
(ofc)| Controls the type of filename format to be used for image files: use the default 'out format' abbreviation (0), no image file format type (1), user input (2) |
oddFieldExt
(ofe)| The user specified odd field extension if aFieldExtControl = 2 |
evenFieldExt
(efe)| The user specified even field extension if aFieldExtControl = 2 |
outFormatExt
(oft)| The string added at the end of the file name if aOutFormatControl = 2 |
useMayaFileName
(umfn)| If the maya file name is to be concatenated with the output file. |
useFrameExt
(ufe)| If the frame extension is to be concatenated with the output file. |
putFrameBeforeExt
(pff)| Should frame number precede the output type extension in file name? |
periodInExt
(peie)| Controls the character between the filename and the file extension: no such character (0), a period (1), or an underscore (2). |
imageFilePrefix
(ifp)| String that defines the name of each output image file. |
renderVersion
(rv)| String that labels versions of rendered images. |
bufferName
(bn)| String that defines the name of buffers inside a rendered image. |
multiCamNamingMode
(mcnm)| Multiple camera buffer naming mode. |
composite
(comp)| Compositing rendering; Do not blend alpha with image color. (unassociated alpha) |
compositeThreshold
(cth)| Mainly for games support. The percentage of a pixel which must be covered by the object before the alpha should consider it part of the object. Animation customers should leave this at 0.0. |
shadowsObeyLightLinking
(soll)| Objects not lit by a light will not cast shadow from that light |
shadowsObeyShadowLinking
(sosl)| Objects not shadow linked to a light will not cast shadow from that light |
recursionDepth
(rd)| Recursion depth for ray tracing. (for spatial subdivision 0,1,2,3 - useful range) |
leafPrimitives
(lp)| Max number of primitives per leaf in raytracing subdivision |
subdivisionPower
(sp)| The power of the number of primitives to regulate axial subdivision |
subdivisionHashSize
(shs)| The minimum hash table size for a subdivsion node |
logRenderPerformance
(lpr)| Do we write a performance log or not |
geometryVector
(gv)| Vector length for geometry samples. |
shadingVector
(sv)| Vector length for shading samples. |
maximumMemory
(mm)| Maximum memory (in megabytes) to be used by the renderer. |
numCpusToUse
(npu)| Number of cpus to use for rendering or IPR (0 means use all). |
interruptFrequency
(itf)| Number of seconds between checks for user interrupt. A value of -1 will disable interrupt checking. |
shadowPass
(shp)| Whether we want to just do the shadow depth map pass. |
iprShadowPass
(isp)| Whether we want to just do the ipr shadow depth map pass. |
useFileCache
(uf)| When true, render swappable objects (ie. tessellations or RT voxels) can be stored on disk in the swap file. If false, tessellations and voxels are deleted and recomputed when needed. |
optimizeInstances
(oi)| When true, the renderer attempts to recognize similarly tesselated shapes. |
reuseTessellations
(rut)| When true, the rendered tessellations are used during the shadow map generation phase. |
matteOpacityUsesTransparency
(mot)| Composite matte using scene transparency rather that residual matte transparency. |
motionBlur
(mb)| Do not (0) or do render using motion blur (1). |
motionBlurByFrame
(mbf)| Use this as the by frame in conjunction with shutterAngle (instead of byFrame) to compute the shutterOpen, shutterMid, and shutterClose frame times. |
motionBlurUseShutter
(mbus)| Use the shutter open and close values for MotionBlur calculations |
motionBlurShutterOpen
(mbso)| Shutter open. |
motionBlurShutterClose
(mbsc)| Shutter close. |
fogGeometry
(fg)| Connect this to the fog geometry. |
applyFogInPost
(afp)| Render and composite fog using depthbuffer at end of normal render (paint effects must be loaded) |
postFogBlur
(pfb)| blurring of fog into foreground applied before compositing on scene (only if applyFogInPost is on) |
preMel
(pram)| MEL function to be called just before rendering |
postMel
(poam)| MEL function to be called just after rendering |
preRenderLayerMel
(prlm)| MEL function to be called just before rendering of each render layer |
postRenderLayerMel
(polm)| MEL function to be called just after rendering of each render layer |
preRenderMel
(prm)| MEL function to be called just before rendering each frame |
postRenderMel
(pom)| MEL function to be called just after rendering each frame |
preFurRenderMel
(pfrm)| MEL function to be called just before rendering of current fur frame |
postFurRenderMel
(pfom)| MEL function to be called just after rendering of current fur frame |
createIprFile
(cif)| Create an IPR file. |
blurLength
(bll)| This is the scale applied on the motion vectors. |
blurSharpness
(bls)| The higher the value, the sharper the blur. The lower the value, the softer the blur. |
smoothValue
(smv)| The higher the value, the more anti-aliased the alpha channel. |
useBlur2DMemoryCap
(ubc)| Enables an absolute memory limit for the 2d blur operation (limit given by the 'blur2DMemoryCap' attribute) |
blur2DMemoryCap
(mbc)| Absolute memory limit for the 2d blur operation |
motionBlurType
(mbt)| Do 2D (0), or 3D (1) motion blur. |
useDisplacementBoundingBox
(udbx)| When true, the bounding box scale is used to predict a bounding box for displacement-mapped objects. If false, all displacment-mapped objects are pre-tessellated to find their bounding boxes. |
smoothColor
(smc)| When true, the color channels will be smoothened during the 2.5D motion blur just as the mask channel. If false, only the mask channel is smoothened and the color channels are scaled based on the mask change. |
keepMotionVector
(kmv)| When true, the motion vector file generated from 2.5D motion blur will be kept. If false, the motion vector file generated from 2.5D motion blur is deleted after the blur is computed. |
iprRenderShading
(isl)| Create an IPR file containing shading, lighting, and glow. |
iprRenderShadowMaps
(ism)| Create an IPR file containing shadow maps. |
iprRenderMotionBlur
(imb)| Create an IPR file containint motion blur. |
rendercallback
(rcb)| The Render callback to be used for this Render (the node at other end of this message plug is a render callback node) |
renderLayerEnable
(rlen)| Render out multiple layers |
forceTileSize
(frts)| Should the tile size be forced? |
tileWidth
(tlwd)| Tile width. |
tileHeight
(tlht)| Tile height. |
jitterFinalColor
(jfc)| When turned on, the image color is jittered to reduce banding. |
raysSeeBackground
(rsb)| This switch controls whether the camera's environment background color is applied to reflection and refraction rays which don't intersect anything. |
oversamplePaintEffects
(ope)| Make the pixel buffers used for paint effects twice the render resolution in order to enhance antialiasing quality. |
oversamplePfxPostFilter
(oppf)| Apply a slight blur to the oversampled paint effects buffer before resizing down to the output resolution. This helps further enhance antialiasing in an oversample paint effects render. Note that it may also cause a very slight blurring of the non-paint effects portion of the render. |
colorProfileEnabled
(cpe)| Toggles whether rendering will use color profiles. |
renderingColorProfile
(rcp)| The rendering color profile. |
inputColorProfile
(icp)| The default input color profile. |
outputColorProfile
(ocp)| The default output color profile. |
hyperShadeBinList
(hbl)| String that keeps the hyper shade bin list. |
swatchCamera
(sc)| The camera used to resolve swatch images for image source nodes. |
renderedOutput
(ro)| Specifies what to render on batch render. All Renderable (2D and 3D) (0), Render Targets Only (2D only) (1), Omit Render Targets (3D only) (2). |