Consider the following items before exporting a model from a 3D modeling application and painting it in Mudbox. The first three requirements are the most critical.
| Requirement | Criteria |
|---|---|
| Existence of UV Texture Coordinates | A model must have UV texture coordinates (UVs) to be painted in Mudbox. UVs are a coordinate system that let you apply 2D images to 3D surfaces by correlating the pixels you paint on an image to where they appear on the model. For more information, see UVs overview. You can quickly tell if a model has UVs after loading it into Mudbox by clicking the UV View tab to display the UV View. If the model has UVs you’ll see a mesh that appears similar to the 3D version of the model but flattened as a 2D representation. The UVs may also appear in several pieces depending on how they were laid out in the original 3D modeling or UV editing application. NoteIf your model does
not contain UV texture coordinates you’ll need to create and arrange
them using a 3D modeling or UV editing application equipped with
UV creation and editing tools. Maya and 3ds Max have tools for this
purpose. The tips described in this topic will aid in arranging
the UVs in those applications in a manner suitable for use within Mudbox.
It is recommended that you wait until all UV editing on your 3D model is finalized before you begin your 3D painting in Mudbox. Otherwise, the UVs can become misaligned with your paint work. |
| Overlapping UVs | UVs should be laid out so they are contained within the UV tile region and do not lie partially across a UV tile border. UVs should be laid out in the 3D modeling or UV editing application so they do not overlap unless you want to take advantage of the model’s symmetry or reuse a portion of the image that is repeated on the model to save texture space. For example, overlapping UVs are useful when you paint an image on one half of a symmetrical model and reuse it on the opposite half. You can also reuse the same area on a texture map for visual elements that are repeated such as windows or brickwork on a building, wheels on a car, fingers on a hand, and so on. Many 3D applications provide a feature for visually confirming the existence of overlapping UVs. You may get unexpected results when painting on a model if the UVs and laid out so they partially overlap when this was not intended to occur. (for example, re-using the same texture space). |
| Spacing around UV shells | The UVs should be laid out in the 3D modeling or UV editing application so that a 4-6 pixel wide empty region exists along the outside perimeter of each UV shell to account for the necessary edge bleed that automatically occurs when painting. If the UVs are spaced too close to each other, or are positioned too close to the edge of image borders (UV tile edge) seams and paint artifacts can appear on the model when it is painted. |
| Shape and relative size of UV faces in relation to the 3D faces | Whenever possible, the shape and relative size of the UV faces should roughly correlate to each other as well as to the shape of the corresponding polygonal faces on the model. This way, the number of pixels allotted to represent the detail on a particular UV shell is roughly consistent from face to face. Otherwise, when a large polygonal face occupies a very small space on the image (UV tile) it appears soft by comparison to a similarly sized polygonal face occupying a larger space on the image because its detail is represented by fewer pixels in the image. In some situations, you may want to scale particular UV shells larger in relation to others within the image area (UV tile) to achieve more visual detail in comparison to other areas of the model. For example, the face of a recognizable character, a detailed console on a spacecraft, or a company logo etc. can require those UVs to be scaled larger so they occupy a larger area on the UV tile and produce the highest texture quality possible in the rendered image. |
| Maximize the area occupied by the UVs | UVs need to be laid out in your 3D modeling or UV editing application to fill the image area (UV tile) as much as possible. This maximizes the resolution provided by the image you paint. This often requires that you rotate the UV shells to fit into a particular location (much like a tailor might rotate a pattern template on top of a piece of cloth in order to minimize wasted material before cutting it). You can also try to minimize the number of unnecessary breaks between the UV shells to help reduce the number of elements that have to fit in the image area (UV tile). This also maximizes pixel space on the image and helps to reduce the potential for the appearance of seams. These criteria must be balanced with the criteria described earlier in this topic. For example, when two adjacent UV faces are also adjacent to each other in the UV layout, but are disconnected, they might be more easily sewn together in your 3D modeling or UV editing application prior to the model being painted in Mudbox. This can minimize the possibility of a seam appearing on the model and ensure that the image you paint takes full advantage of the resolution you specify in the paint layer. |
