Loading CDL Data in the EDL Panel
 
 
 

The EDL panel contains an interface to support loading CDL data.

When you load an EDL into Lustre, the CDL data is not converted at that time. You can conform and assemble the EDL as you normally would do. However, if you want to use the CDL data of the currently loaded EDL, you need to use the CDL Load options to apply the CDL data to the cut file.

CDL Load Options

When you are ready to use CDL data, you can select one of two actions listed in the CDL Load list:

Show small imageShow large image

(a) CDL Load options  

NoteLoading CDL data does not erase the current grade applied to the shots. Loading CDL data only loads the data into the CDL panel. If the CDL data is already loaded, it will be overwritten with the newly loaded CDL data.

You can use a different EDL to conform and a different EDL to import CDL data. To load data from another EDL, Ctrl-click a CDL Load button. The data will be loaded using the Match Options from a cut selected in the Cut Name list. See Changing a Cut.

Assembling an EDL with CDL Data

The following procedure assembles an EDL with CDL data.

To assemble an EDL with CDL data:

  1. Drag the shots that you want to assemble into the Shot bin.
  2. Click Editing, and then click Assemble.

    The Assemble menu appears.

    Show small imageShow large image

    (a) EDL list  

  3. Select the EDL that contains the CDL data that you want to load from the EDL list.
  4. Click Load EDL.

    The selected EDL loads.

    Show small imageShow large image

    NoteFor more information on assembling an EDL, see Assembling an EDL.
  5. Click Match Media to match the EDL event timecodes to the available shot timecodes in the Shot bin prior to assembling.
  6. Click Assemble to conform the EDL and build the cut.

    The EDL events in the Assembly window are cleared.

  7. Select the same EDL and click Load EDL.
  8. Click CDL Load All or CDL Load Selected. See CDL Load Options.

    The CDL data is now part of the current cut.

CDL EDL Comment

CDL data for a given shot is represented as a comment in the EDL file.

Show small imageShow large image

There is one CDL comment line per event. See Adding CDL Data to an EDL File.

CDL XML File

CDL data for a given shot is represented as a reference in the EDL file to an XML file.

Show small imageShow large image

NoteThe ASC CDL specification allows more than one colour correction data set per XML file. Lustre only supports a single colour correction data set per CDL and XML file. See ASC CDL specifications for more detail.

See Adding CDL Data to an EDL File.

CDL XML Files Location

To be able to use XML files, place them in an import sub-folder located in the project's sacc_data folder:

<my project>/<scene 1>/<sacc_data>/<import>