Loading Flame Setups and Sources
 
 
 

When you load Batch setups, associated clips are automatically loaded with the setup. If you load a setup from Flame, make sure the clips were saved to a Snapshot library in Flame before you load the setup; Flare will not find clips saved to the Flame Desktop.

To save clips associated with a Flame setup, you must select a read-write Snapshot library.

To load a Batch setup created in Flame:

  1. Click Load Batch.

    Show small imageShow large image

  2. Select a Flame setup from the /batch/flame directory. Flame setups do not have extensions in their name.

    The setup and all associated clips are automatically loaded into Batch.

  3. Click Setup.

    Show small imageShow large image

    The Snapshot library in Flame was saved as a preference with the Flame setup.

    Show small imageShow large image

    (a) Flame Snapshot library

  4. To be able to save the clips associated with the loaded setup, change the library to a read-write library. Select a Snapshot library from the Snapshot Library box or select <new> and create a library.
    NoteYou can also select a Snapshot library from the Save Setup As & Snapshot browser when taking a snapshot of your sources.

    Show small imageShow large image

    (a) Flare Snapshot library

    When you save sources and setups, the clips will be saved to this Snapshot library. The library will be saved as a preference with the Flare setup.