Selecting Print LUTs
 
 
 

You can select up to three Print LUTs for quick comparison in a project. When your lab sends you the latest LUT, simply select it from the Calibrate menu. You can have any number of Print LUTs on the system.

To select Print LUTs for comparison:

  1. In the Calibrate menu, click 1.

    Show small imageShow large image

  2. Select a Print LUT from the Print LUT list.

    Show small imageShow large image

    TipIf you copied or saved a LUT to the lut folder but the LUT is not listed, press CTRL+R to refresh the Print LUT list.

    The Print LUT is assigned to L1.

    Show small imageShow large image

  3. Repeat steps 1 and 2 to assign a Print LUT to L2 and L3.