Paint > Effect Brush > Dodge Brush
 
 
 

Lightens the color of the paint on the active image layer, as if a bright light of the selected brush color was projected on it.

For information on how to paint, see Paint and erase.

Brush Options

NoteSome of these options are also available in the Paint Panel when this tool is active.
Reset

Resets all Brush Options to their default settings. If brushes have been saved to the shelf, Reset resets to those settings at the time the brush was saved to the shelf.

Properties tab

Brush Mode

Controls whether the brush will:

See also Set brush mode to paint, erase, hide, or show.

Brush Color

The color of the brush paint. See Set brush paint color.

Preserve Color

ON – When you save the brush to a shelf, its current color is saved with it. When you later select the brush from the shelf, its color will be the same as when you saved it to the shelf. When you save the brush to a palette, its current color is not saved when exiting .

OFF – When you save the brush to a shelf, its current color is not saved with it. When you later select the brush from the shelf, its color will be the current color.

See Set brush paint color.

Min Radius

The radius of the brush (measured in pixels) when you press the stylus lightly against the tablet. The valid range is 0 - 255. See Set brush size, shape, and profile.

Max Radius

The radius of the brush (measured in pixels) when you press the stylus strongly against the tablet. The valid range is 0 - 255. See Set brush size, shape, and profile.

Min Opacity

Controls how see-through the paint applied by the brush is when you press the stylus lightly against the tablet. If Min Opacity is less than 1, and you sketch several times in the same spot, the paint builds up and becomes more opaque. The valid range is 0 (fully transparent) to 1 (fully opaque). See Set brush and paint opacity.

Max Opacity

Controls how see-through the paint applied by the brush is when you press the stylus strongly against the tablet. If Max Opacity is less than 1, and you sketch several times in the same spot, the paint builds up and becomes more opaque. The valid range is 0 (fully transparent) to 1 (fully opaque). See Set brush and paint opacity.

Aspect

Controls how flat or circular the brush stamp is. The valid range is 0.01 (flat and thin) to 1 (circular). See Set brush size, shape, and profile.

Rotation

The angle (measured in degrees) of the brush stamp. If Aspect is less than 1, changing Rotation makes the brush stamp more horizontal (0) or more vertical (90). The valid range is 0 - 360. See Set brush size, shape, and profile.

Dodge Properties

Selection
Dodge Strength

Stamp tab

Texture and Shape

Capture Mode

Off – No capture takes place.

Shape – The next click of the mouse on the image captures the Shape (the alpha channel) directly beneath the brush as a snapshot to use for a brush stamp.

Shape and Texture – The next click of the mouse on the image captures both the paint and the Shape directly beneath the brush as a snapshot to use for a brush stamp. Any transparency on the image layer is captured, as are the colors.

Use Stamp

Off – Do not use any stamp. Use the regular brush.

Shape – Use the captured shape (alpha channel) for the brush.

Shape and Texture – Use the captured shape (alpha channel) and texture (color) for the brush.

Profile

Brush Profile

Controls the softness or hardness of the brush stamp edges. See Set brush size, shape, and profile. Select one of Regular, Solid, Hard Solid, or Buzz from the pop-up menu to obtain the following brush profiles.

To use a brush profile you have customized, select the Custom menu item. To create a custom brush profile, double-click any brush icon in the Sketch#2 shelf to open the brush editor.

Stroke tab

Changing these settings changes the appearance of a sequence of brush profiles laid down by dragging the stylus or mouse across the image layer.

Spacing Bias

Controls the space between stamps in a stroke. Low values produce smooth strokes with no spaces between stamps. Higher values produce strokes that appear as a series of dots. The valid range is 0 - 255. See Set brush stroke properties .

Spacing Noise

The amount of random variation in the space between stamps in a stroke. The valid range is 0 (no random variation) to 25 (high random variation). See Set brush stroke properties .

Rotate to Stroke

ON – The brush stamp rotates in the direction of the brush stroke as you sketch.

OFF – The brush stamp always remains in the same direction and does not rotate in the direction of the brush stroke.

See Set brush stroke properties .

Rotation Jitter

The amount of random variation in the brush stamp direction. The valid range is 0 (no random variation) to 255 (high random variation). See Set brush stroke properties .