pymel.core.modeling.polyExtrudeEdge

polyExtrudeEdge(*args, **kwargs)

Extrude edges separately or together.

Flags:
Long name (short name) Argument Types Properties
caching (cch) bool ../../../_images/create.gif ../../../_images/edit.gif
 
Toggle caching for all attributes so that no recomputation is needed
constructionHistory (ch) bool ../../../_images/create.gif ../../../_images/query.gif
 

Turn the construction history on or off (where applicable). If construction history is on then the corresponding node will be inserted into the history chain for the mesh. If construction history is off then the operation will be performed directly on the object.Note:If the object already has construction history then this flag is ignored and the node will always be inserted into the history chain.

createCurve (cc) bool  
   
divisions (d) int ../../../_images/create.gif ../../../_images/query.gif ../../../_images/edit.gif
 
This flag specifies the number of subdivisions.C: Default is 1Q: When queried, this flag returns an int.
gain (ga) float  
   
inputCurve (inc) PyNode ../../../_images/create.gif
 

This flag specifies the name of the curve to be used as input for extrusionC: The selected edges will be extruded along the curve. It will be useful to set a higher value (greater than 4) for the ‘-d/-divisions’ flag, to get good results. The normal of the surface has to be aligned with the direction of the curve. The extrusion is evenly distributed in the curve’s parameter space, and not on the curve’s geometry space

keepFacesTogether (kft) bool ../../../_images/create.gif ../../../_images/query.gif ../../../_images/edit.gif
 

This flag specifies how to extrude edgess. If “on”, edges are pulled together (connected ones stay connected), otherwise they are pulled independentely.C: Default is “on”.Q: When queried, this flag returns an int.

localCenter (lc) int  
   
localDirection (ld) float, float, float ../../../_images/create.gif ../../../_images/query.gif ../../../_images/edit.gif
 
This flag specifies the local slant axis (see local rotation).C: Default is 0.0 0.0 1.0.Q: When queried, this flag returns a float[3].
localDirectionX (ldx) float ../../../_images/create.gif ../../../_images/query.gif ../../../_images/edit.gif
 
This flag specifies X for the local slant axis.C: Default is 0.0.Q: When queried, this flag returns a float.
localDirectionY (ldy) float ../../../_images/create.gif ../../../_images/query.gif ../../../_images/edit.gif
 
This flag specifies Y for the local slant axis.C: Default is 0.0.Q: When queried, this flag returns a float.
localDirectionZ (ldz) float ../../../_images/create.gif ../../../_images/query.gif ../../../_images/edit.gif
 
This flag specifies Z for the local slant axis.C: Default is 1.0.Q: When queried, this flag returns a float.
localRotate (lr) float, float, float ../../../_images/create.gif ../../../_images/query.gif ../../../_images/edit.gif
 

This flag specifies the local rotations : (slantRot, slantRoll, twistRot).C: Default is 0.0 0.0 0.0.Q: When queried, this flag returns a float[3]. Local rotation (slantRot, slantRoll, twistRot).

localRotateX (lrx) float ../../../_images/create.gif ../../../_images/query.gif ../../../_images/edit.gif
 
This flag specifies local rotation X angle (Slant Rot around slantAxis).C: Default is 0.0. The range is [0, 360].Q: When queried, this flag returns a float.
localRotateY (lry) float ../../../_images/create.gif ../../../_images/query.gif ../../../_images/edit.gif
 
This flag specifies local rotation Y angle (Slant Roll of slantAxis).C: Default is 0.0. The range is [0, 180].Q: When queried, this flag returns a float.
localRotateZ (lrz) float ../../../_images/create.gif ../../../_images/query.gif ../../../_images/edit.gif
 
This flag specifies local rotation Z angle (Twist around normal).C: Default is 0.0. The range is [0, 360].Q: When queried, this flag returns a float.
localScale (ls) float, float, float ../../../_images/create.gif ../../../_images/query.gif ../../../_images/edit.gif
 
This flag specifies the local scaling vector.C: Default is 1.0 1.0 1.0.Q: When queried, this flag returns a float[3].
localScaleX (lsx) float ../../../_images/create.gif ../../../_images/query.gif ../../../_images/edit.gif
 
This flag specifies X for local scaling vector.C: Default is 1.0.Q: When queried, this flag returns a float.
localScaleY (lsy) float ../../../_images/create.gif ../../../_images/query.gif ../../../_images/edit.gif
 
This flag specifies Y for local scaling vector.C: Default is 1.0.Q: When queried, this flag returns a float.
localScaleZ (lsz) float ../../../_images/create.gif ../../../_images/query.gif ../../../_images/edit.gif
 
This flag specifies Z for local scaling vector : Flattening.C: Default is 1.0. The range is [0.0, 1.0].Q: When queried, this flag returns a float.Common flags
localTranslate (lt) float, float, float ../../../_images/create.gif ../../../_images/query.gif ../../../_images/edit.gif
 
This flag specifies the local translation vector.C: Default is 0.0 0.0 0.0.Q: When queried, this flag returns a float[3].
localTranslateX (ltx) float ../../../_images/create.gif ../../../_images/query.gif ../../../_images/edit.gif
 
This flag specifies the X local translation vector.C: Default is 0.0.Q: When queried, this flag returns a float.
localTranslateY (lty) float ../../../_images/create.gif ../../../_images/query.gif ../../../_images/edit.gif
 
This flag specifies the Y local translation vector.C: Default is 0.0.Q: When queried, this flag returns a float.
localTranslateZ (ltz) float ../../../_images/create.gif ../../../_images/query.gif ../../../_images/edit.gif
 
This flag specifies the Z local translation vector.C: Default is 0.0.Q: When queried, this flag returns a float.
name (n) unicode ../../../_images/create.gif
 
Give a name to the resulting node.
nodeState (nds) int ../../../_images/create.gif ../../../_images/query.gif ../../../_images/edit.gif
 

Defines how to evaluate the node. 0: Normal1: PassThrough2: Blocking3: Internally disabled. Will return to Normal state when enabled4: Internally disabled. Will return to PassThrough state when enabled5: Internally disabled. Will return to Blocking state when enabledFlag can appear in Create mode of commandFlag can have multiple arguments, passed either as a tuple or a list.

offset (off) float  
   
pivot (pvt) float, float, float ../../../_images/create.gif ../../../_images/query.gif ../../../_images/edit.gif
 
This flag specifies the pivot for scaling and rotation.C: Default is 0.0 0.0 0.0.Q: When queried, this flag returns a float[3].
pivotX (pvx) float ../../../_images/create.gif ../../../_images/query.gif ../../../_images/edit.gif
 
This flag specifies the X pivot for scaling and rotation.C: Default is 0.0.Q: When queried, this flag returns a float.
pivotY (pvy) float ../../../_images/create.gif ../../../_images/query.gif ../../../_images/edit.gif
 
This flag specifies the Y pivot for scaling and rotation.C: Default is 0.0.Q: When queried, this flag returns a float.
pivotZ (pvz) float ../../../_images/create.gif ../../../_images/query.gif ../../../_images/edit.gif
 
This flag specifies the Z pivot for scaling and rotation.C: Default is 0.0.Q: When queried, this flag returns a float. Local Values
random (ran) float ../../../_images/create.gif ../../../_images/query.gif ../../../_images/edit.gif
 
This flag specifies the random value for all parameters.C: Default is 0.0. The range is [-10.0, 10.0].Q: When queried, this flag returns a float.
rotate (ro) float, float, float ../../../_images/create.gif ../../../_images/query.gif ../../../_images/edit.gif
 
This flag specifies the rotation angles around X, Y, Z.C: Default is 0.0 0.0 0.0.Q: When queried, this flag returns a float[3].
rotateX (rx) float ../../../_images/create.gif ../../../_images/query.gif ../../../_images/edit.gif
 
This flag specifies the rotation angle around X.C: Default is 0.0.Q: When queried, this flag returns a float.
rotateY (ry) float ../../../_images/create.gif ../../../_images/query.gif ../../../_images/edit.gif
 
This flag specifies the rotation angle around Y.C: Default is 0.0.Q: When queried, this flag returns a float.
rotateZ (rz) float ../../../_images/create.gif ../../../_images/query.gif ../../../_images/edit.gif
 
This flag specifies the rotation angle around Z.C: Default is 0.0.Q: When queried, this flag returns a float.
scale (s) float, float, float ../../../_images/create.gif ../../../_images/query.gif ../../../_images/edit.gif
 
This flag specifies the scaling vector.C: Default is 1.0 1.0 1.0.Q: When queried, this flag returns a float[3].
scaleX (sx) float ../../../_images/create.gif ../../../_images/query.gif ../../../_images/edit.gif
 
This flag specifies X for scaling vector.C: Default is 1.0.Q: When queried, this flag returns a float.
scaleY (sy) float ../../../_images/create.gif ../../../_images/query.gif ../../../_images/edit.gif
 
This flag specifies Y for scaling vector.C: Default is 1.0.Q: When queried, this flag returns a float.
scaleZ (sz) float ../../../_images/create.gif ../../../_images/query.gif ../../../_images/edit.gif
 
This flag specifies Z for scaling vector.C: Default is 1.0.Q: When queried, this flag returns a float.
smoothingAngle (sma) float ../../../_images/create.gif ../../../_images/query.gif ../../../_images/edit.gif
 

This flag specifies smoothingAngle threshold used to determine whether newly created edges are hard or soft.C: Default is 30.0. The range is [0, 180].Q: When queried, this flag returns a float. Global Values

taper (tp) float  
   
taperCurve_FloatValue (cfv) float  
   
taperCurve_Interp (ci) int  
   
taperCurve_Position (cp) float  
   
thickness (tk) float  
   
translate (t) float, float, float ../../../_images/create.gif ../../../_images/query.gif ../../../_images/edit.gif
 
This flag specifies the translation vector.C: Default is 0.0 0.0 0.0.Q: When queried, this flag returns a float[3].
translateX (tx) float ../../../_images/create.gif ../../../_images/query.gif ../../../_images/edit.gif
 
This flag specifies the X translation vector.C: Default is 0.0.Q: When queried, this flag returns a float.
translateY (ty) float ../../../_images/create.gif ../../../_images/query.gif ../../../_images/edit.gif
 
This flag specifies the Y translation vector.C: Default is 0.0.Q: When queried, this flag returns a float.
translateZ (tz) float ../../../_images/create.gif ../../../_images/query.gif ../../../_images/edit.gif
 
This flag specifies the Z translation vector.C: Default is 0.0.Q: When queried, this flag returns a float.
twist (twt) float  
   
worldSpace (ws) bool ../../../_images/create.gif ../../../_images/query.gif ../../../_images/edit.gif
 

This flag specifies which reference to use. If “on” : all geometrical values are taken in world reference. If “off” : all geometrical values are taken in object reference.C: Default is off.Q: When queried, this flag returns an int.

Derived from mel command maya.cmds.polyExtrudeEdge

Example:

import pymel.core as pm

import maya.cmds as cmds

# Separate
pm.polyPlane( n='plg', w=10, h=10 )
pm.polyExtrudeEdge( 'plg.e[71:72]', 'plg.e[81:82]', kft=False,, ltz=2, ls=(.5, .5, 0) )
# Edges are extruded then scaled separately
pm.delete( 'plg' )


# Together
pm.polyPlane( n='plg', w=10, h=10 )
pm.polyExtrudeEdge( 'plg.e[71:72]', 'plg.e[81:82]', kft=True, ltz=2, ls=(.5, .5, 0) )
# Edges are extruded then scaled together
pm.delete( 'plg' )

Previous topic

pymel.core.modeling.polyEvaluate

Next topic

pymel.core.modeling.polyExtrudeFacet

Core

Core Modules

Other Modules

This Page