pymel.core.modeling.polyExtrudeEdge

polyExtrudeEdge(*args, **kwargs)

Extrude edges separately or together.

Flags:

Long name (short name)		Argument Types	Properties
caching (cch)		bool
	Toggle caching for all attributes so that no recomputation is needed
constructionHistory (ch)		bool
	Turn the construction history on or off (where applicable). If construction history is on then the corresponding node will be inserted into the history chain for the mesh. If construction history is off then the operation will be performed directly on the object. Note:If the object already has construction history then this flag is ignored and the node will always be inserted into the history chain.
divisions (d)		int
	This flag specifies the number of subdivisions. C: Default is 1 Q: When queried, this flag returns an int.
gain (ga)		float
inputCurve (inc)		PyNode
	This flag specifies the name of the curve to be used as input for extrusion C: The selected edges will be extruded along the curve. It will be useful to set a higher value (greater than 4) for the ‘-d/-divisions’ flag, to get good results. The normal of the surface has to be aligned with the direction of the curve. The extrusion is evenly distributed in the curve’s parameter space, and not on the curve’s geometry space
keepFacesTogether (kft)		bool
	This flag specifies how to extrude edgess. If on, edges are pulled together (connected ones stay connected), otherwise they are pulled independentely. C: Default is on. Q: When queried, this flag returns an int.
localCenter (lc)		int
localDirection (ld)		float, float, float
	This flag specifies the local slant axis (see local rotation). C: Default is 0.0 0.0 1.0. Q: When queried, this flag returns a float[3].
localDirectionX (ldx)		float
	This flag specifies X for the local slant axis. C: Default is 0.0. Q: When queried, this flag returns a float.
localDirectionY (ldy)		float
	This flag specifies Y for the local slant axis. C: Default is 0.0. Q: When queried, this flag returns a float.
localDirectionZ (ldz)		float
	This flag specifies Z for the local slant axis. C: Default is 1.0. Q: When queried, this flag returns a float.
localRotate (lr)		float, float, float
	This flag specifies the local rotations : (slantRot, slantRoll, twistRot). C: Default is 0.0 0.0 0.0. Q: When queried, this flag returns a float[3]. Local rotation (slantRot, slantRoll, twistRot).
localRotateX (lrx)		float
	This flag specifies local rotation X angle (Slant Rot around slantAxis). C: Default is 0.0. The range is [0, 360]. Q: When queried, this flag returns a float.
localRotateY (lry)		float
	This flag specifies local rotation Y angle (Slant Roll of slantAxis). C: Default is 0.0. The range is [0, 180]. Q: When queried, this flag returns a float.
localRotateZ (lrz)		float
	This flag specifies local rotation Z angle (Twist around normal). C: Default is 0.0. The range is [0, 360]. Q: When queried, this flag returns a float.
localScale (ls)		float, float, float
	This flag specifies the local scaling vector. C: Default is 1.0 1.0 1.0. Q: When queried, this flag returns a float[3].
localScaleX (lsx)		float
	This flag specifies X for local scaling vector. C: Default is 1.0. Q: When queried, this flag returns a float.
localScaleY (lsy)		float
	This flag specifies Y for local scaling vector. C: Default is 1.0. Q: When queried, this flag returns a float.
localScaleZ (lsz)		float
	This flag specifies Z for local scaling vector : Flattening. C: Default is 1.0. The range is [0.0, 1.0]. Q: When queried, this flag returns a float. Common flags
localTranslate (lt)		float, float, float
	This flag specifies the local translation vector. C: Default is 0.0 0.0 0.0. Q: When queried, this flag returns a float[3].
localTranslateX (ltx)		float
	This flag specifies the X local translation vector. C: Default is 0.0. Q: When queried, this flag returns a float.
localTranslateY (lty)		float
	This flag specifies the Y local translation vector. C: Default is 0.0. Q: When queried, this flag returns a float.
localTranslateZ (ltz)		float
	This flag specifies the Z local translation vector. C: Default is 0.0. Q: When queried, this flag returns a float.
name (n)		unicode
	Give a name to the resulting node.
nodeState (nds)		int
	Defines how to evaluate the node. 0: Normal1: PassThrough2: Blocking3: Internally disabled. Will return to Normal state when enabled4: Internally disabled. Will return to PassThrough state when enabled5: Internally disabled. Will return to Blocking state when enabledFlag can have multiple arguments, passed either as a tuple or a list.
pivot (pvt)		float, float, float
	This flag specifies the pivot for scaling and rotation. C: Default is 0.0 0.0 0.0. Q: When queried, this flag returns a float[3].
pivotX (pvx)		float
	This flag specifies the X pivot for scaling and rotation. C: Default is 0.0. Q: When queried, this flag returns a float.
pivotY (pvy)		float
	This flag specifies the Y pivot for scaling and rotation. C: Default is 0.0. Q: When queried, this flag returns a float.
pivotZ (pvz)		float
	This flag specifies the Z pivot for scaling and rotation. C: Default is 0.0. Q: When queried, this flag returns a float. Local Values
random (ran)		float
	This flag specifies the random value for all parameters. C: Default is 0.0. The range is [-10.0, 10.0]. Q: When queried, this flag returns a float.
rotate (ro)		float, float, float
	This flag specifies the rotation angles around X, Y, Z. C: Default is 0.0 0.0 0.0. Q: When queried, this flag returns a float[3].
rotateX (rx)		float
	This flag specifies the rotation angle around X. C: Default is 0.0. Q: When queried, this flag returns a float.
rotateY (ry)		float
	This flag specifies the rotation angle around Y. C: Default is 0.0. Q: When queried, this flag returns a float.
rotateZ (rz)		float
	This flag specifies the rotation angle around Z. C: Default is 0.0. Q: When queried, this flag returns a float.
scale (s)		float, float, float
	This flag specifies the scaling vector. C: Default is 1.0 1.0 1.0. Q: When queried, this flag returns a float[3].
scaleX (sx)		float
	This flag specifies X for scaling vector. C: Default is 1.0. Q: When queried, this flag returns a float.
scaleY (sy)		float
	This flag specifies Y for scaling vector. C: Default is 1.0. Q: When queried, this flag returns a float.
scaleZ (sz)		float
	This flag specifies Z for scaling vector. C: Default is 1.0. Q: When queried, this flag returns a float.
smoothingAngle (sma)		float
	This flag specifies smoothingAngle threshold used to determine whether newly created edges are hard or soft. C: Default is 30.0. The range is [0, 180]. Q: When queried, this flag returns a float. Global Values
taper (tp)		float
taperCurve_FloatValue (cfv)		float
taperCurve_Interp (ci)		int
taperCurve_Position (cp)		float
translate (t)		float, float, float
	This flag specifies the translation vector. C: Default is 0.0 0.0 0.0. Q: When queried, this flag returns a float[3].
translateX (tx)		float
	This flag specifies the X translation vector. C: Default is 0.0. Q: When queried, this flag returns a float.
translateY (ty)		float
	This flag specifies the Y translation vector. C: Default is 0.0. Q: When queried, this flag returns a float.
translateZ (tz)		float
	This flag specifies the Z translation vector. C: Default is 0.0. Q: When queried, this flag returns a float.
twist (twt)		float
worldSpace (ws)		bool
	This flag specifies which reference to use. If on: all geometrical values are taken in world reference. If off: all geometrical values are taken in object reference. C: Default is off. Q: When queried, this flag returns an int.

Derived from mel command maya.cmds.polyExtrudeEdge

Example:

import pymel.core as pm

# Separate
pm.polyPlane( n='plg', w=10, h=10 )
pm.polyExtrudeEdge( 'plg.e[71:72]', 'plg.e[81:82]', kft=False,, ltz=2, ls=(.5, .5, 0) )
# Edges are extruded then scaled separately
pm.delete( 'plg' )


# Together
pm.polyPlane( n='plg', w=10, h=10 )
pm.polyExtrudeEdge( 'plg.e[71:72]', 'plg.e[81:82]', kft=True, ltz=2, ls=(.5, .5, 0) )
# Edges are extruded then scaled together
pm.delete( 'plg' )