nodeTreeLister

Go to: Synopsis. Return value. Flags. MEL examples.

Synopsis

nodeTreeLister [-addFavorite string] [-addItem string string script] [-annotation string] [-backgroundColor float float float] [-clearContents] [-collapsePath string] [-defineTemplate string] [-docTag string] [-dragCallback script] [-dropCallback script] [-enable boolean] [-enableBackground boolean] [-executeItem string] [-exists] [-expandPath string] [-expandToDepth int] [-favoritesCallback script] [-favoritesList] [-fullPathName string] [-height int] [-isObscured] [-itemScript string] [-manage boolean] [-numberOfPopupMenus] [-parent string] [-popupMenuArray] [-preventOverride boolean] [-removeFavorite string] [-removeItem string] [-resultsPathUnderCursor] [-selectPath string] [-useTemplate string] [-visible boolean] [-visibleChangeCommand script] [-width int] [string]

nodeTreeLister is undoable, queryable, and editable.

Return value

In query mode, return type is based on queried flag.

Flags

Long name (short name)	Argument types	Properties
-exists(-ex)
Returns true|false depending upon whether the specified object exists. Other flags are ignored.
-defineTemplate(-dt)	string
Puts a command in a mode where any other flags and args are parsed and added to the command template specified in the argument. They will be used as default arguments in any subsequent invocations of the command when templateName is set as the current template.
-useTemplate(-ut)	string
Force the command to use a command template other than the current one.
-parent(-p)	string
The parent layout for this control.
-enable(-en)	boolean
The enable state of the control. By default, this flag is set to true and the control is enabled. Specify false and the control will appear dimmed or greyed-out indicating it is disabled.
-width(-w)	int
The width of the control. The control will attempt to be this size if it is not overruled by parent layout conditions.
-height(-h)	int
The height of the control. The control will attempt to be this size if it is not overruled by parent layout conditions.
-visible(-vis)	boolean
The visible state of the control. A control is created visible by default. Note that a control's actual appearance is also dependent on the visible state of its parent layout(s).
-visibleChangeCommand(-vcc)	script
Command that gets executed when visible state of the control changes.
-isObscured(-io)
Return whether the control can actually be seen by the user. The control will be obscured if its state is invisible, if it is blocked (entirely or partially) by some other control, if it or a parent layout is unmanaged, or if the control's window is invisible or iconified.
-manage(-m)	boolean
Manage state of the control. An unmanaged control is not visible, nor does it take up any screen real estate. All controls are created managed by default.
-numberOfPopupMenus(-npm)
Return the number of popup menus attached to this control.
-popupMenuArray(-pma)
Return the names of all the popup menus attached to this control.
-preventOverride(-po)	boolean
If true, this flag disallows overriding the control's attribute via the control's right mouse button menu.
-annotation(-ann)	string
Annotate the control with an extra string value.
-backgroundColor(-bgc)	float float float
The background color of the control. The arguments correspond to the red, green, and blue color components. Each component ranges in value from 0.0 to 1.0. When setting backgroundColor, the background is automatically enabled, unless enableBackground is also specified with a false value.
-enableBackground(-ebg)	boolean
Enables the background color of the control.
-docTag(-dtg)	string
Add a documentation flag to the control. The documentation flag has a directory structure like hierarchy. Eg. -dt render/multiLister/createNode/material
-dragCallback(-dgc)	script
Adds a callback that is called when the middle mouse button is pressed. The MEL version of the callback is of the form: global proc string[] callbackName(string $dragControl, int $x, int $y, int $mods) The proc returns a string array that is transferred to the drop site. By convention the first string in the array describes the user settable message type. Controls that are application defined drag sources may ignore the callback. $mods allows testing for the key modifiers CTL and SHIFT. Possible values are 0 == No modifiers, 1 == SHIFT, 2 == CTL, 3 == CTL + SHIFT. In Python, it is similar, but there are two ways to specify the callback. The recommended way is to pass a Python function object as the argument. In that case, the Python callback should have the form: def callbackName( dragControl, x, y, modifiers ): The values of these arguments are the same as those for the MEL version above. The other way to specify the callback in Python is to specify a string to be executed. In that case, the string will have the values substituted into it via the standard Python format operator. The format values are passed in a dictionary with the keys "dragControl", "x", "y", "modifiers". The "dragControl" value is a string and the other values are integers (eg the callback string could be "print '%(dragControl)s %(x)d %(y)d %(modifiers)d'")
-dropCallback(-dpc)	script
Adds a callback that is called when a drag and drop operation is released above the drop site. The MEL version of the callback is of the form: global proc callbackName(string $dragControl, string $dropControl, string $msgs[], int $x, int $y, int $type) The proc receives a string array that is transferred from the drag source. The first string in the msgs array describes the user defined message type. Controls that are application defined drop sites may ignore the callback. $type can have values of 1 == Move, 2 == Copy, 3 == Link. In Python, it is similar, but there are two ways to specify the callback. The recommended way is to pass a Python function object as the argument. In that case, the Python callback should have the form: def pythonDropTest( dragControl, dropControl, messages, x, y, dragType ): The values of these arguments are the same as those for the MEL version above. The other way to specify the callback in Python is to specify a string to be executed. In that case, the string will have the values substituted into it via the standard Python format operator. The format values are passed in a dictionary with the keys "dragControl", "dropControl", "messages", "x", "y", "type". The "dragControl" value is a string and the other values are integers (eg the callback string could be "print '%(dragControl)s %(dropControl)s %(messages)r %(x)d %(y)d %(type)d'")
-fullPathName(-fpn)	string
Return the full path name of the widget, which includes all the parents
-addItem(-add)	string string script
Add an item to the control. The arguments are item-path,icon path,command where item-path is the path from the root of the tree to the item's name icon path is the icon displayed in the results list command is the script which is executed when the item is LMB clicked
-addFavorite(-af)	string
Add an item path to the favorites folder. The item path does not have to actually be in the tree.
-clearContents(-clr)
Clears the contents of the control.
-executeItem(-ei)	string
Execute the command associated with an item.
-favoritesList(-fl)
Returns the list of favorite items.
-removeFavorite(-rf)	string
Remove an item from favorites. Accepts the full favorite path or the tail of the full path.
-removeItem(-rem)	string
Remove an item path.
-resultsPathUnderCursor( -ruc)
Returns the path to the result (right-pane) item under the mouse cursor. Returns an empty string if there is no such item.
-collapsePath(-cp)	string
Collapse a path in the tree.
-expandPath(-ep)	string
Expand a path in the tree.
-expandToDepth(-etd)	int
Expand the tree to the given depth.
-favoritesCallback(-fcb)	script
This script is called whenever a favorite is added or removed. It is passed two arguments: The item's path and a boolean indicating if it is being added to favorites (True) or removed (False).
-itemScript(-isc)	string
Returns the language and script command of the passed item path as a two-element list, the first element is the string "MEL" or "Python" and the second is the command script. Note that items with Python callable commands will be returned as strings. In query mode, this flag needs a value.
-selectPath(-sp)	string
Select a path in the tree.

Flag can appear in Create mode of command	Flag can appear in Edit mode of command
Flag can appear in Query mode of command	Flag can be used more than once in a command.

MEL examples

window -width 200;
formLayout "theForm";
nodeTreeLister "theTreeLister";
formLayout -e
        -af theTreeLister top 0
        -af theTreeLister left 0
        -af theTreeLister bottom 0
        -af theTreeLister right 0
        theForm;
showWindow;