|
View > Camera Tools > Tumble Tool |
Revolves the camera by varying the azimuth and elevation angles in a perspective view. You can also press 
+ 
. Hold 
to constrain the camera movement.
Related topics
|
View > Camera Tools > Tumble Tool > 
Tumble scale
Scales the speed of the camera movement. The slider range is 0.01 to 10. The default value is 1.
Tumble camera about
Center of Interest
The camera tumbles about its center of interest. Tumble camera about is set to Center of interest by default.
Tumble on object
Uses an object as the tumble pivot if the Tumble Tool icon is over the object when you start tumbling.
Tumble Pivot
The camera tumbles about its pivot point. This tumble pivot can also be set in the camera’s Attribute Editor.These values are stored in world space coordinates.
View operations such as Frame Selection, Frame All, Look at Selection, Default Home, and Bookmarks all set the tumble pivot.
Orthographic views
Locked
If on, you cannot tumble an orthographic camera. If off, you can tumble an orthographic camera. Locked is on by default.
Stepped
If on, you can tumble an orthographic camera in discrete steps. The Stepped operation lets you easily return to the Default Home positions. If off, you can tumble an orthographic camera smoothly. Stepped is only available if Locked is off. Stepped is on by default.
Ortho step
The angle of steps (in degrees) that you can tumble an orthographic camera when Locked is off and Stepped is on. The valid range is 0.01 to 180. The default value is 5.