StudioPaint 3D v3.2

The SP3.2 release is fully qualified and supported only under IRIX 6.2.
Eight-bit graphics configurations are not supported.

Alias has gone through an extensive testing and qualification cycle and has worked with SGI to ensure that IRIX 6.2 fully supports SP3.2

SP3.2 will load and run under IRIX 5.3 and many systems (Indy, Indigo2 Extreme) are problem-free in this configuration. However, should you encounter a graphics related problem (such as picking not working as expected or portions of the display not being refreshed correctly), the Assist Hotline will only be able to recommend that you "upgrade to IRIX 6.2 including any indicated patches." Assist will still be able to answer questions about the functionality of the package.

Whether you choose to run SP3.2 under IRIX 5.3 or IRIX 6.2, it is crucial that operating system patches be applied in order to rectify known problems that will seriously impede the usability and/or stability of SP3.2. Please see the Qualification Chart for exact details.

StudioPaint 3D 3.2 is compatible with PA/ST 7.5, 7.5.1, and 7.5.2.
StudioPaint 3D 3.1 is compatible with PA/ST 7.0 & 7.0.1.
These are the ONLY combinations of Studio/StudioPaint 3D that will allow a user to transfer files back AND forth between the two products.
We recommend a minimum of 128MB RAM to run StudioPaint3D 3.2 effectively.

Hardware	Operating System [SGI IRIX]
Onyx Infinite Reality	IS NOT QUALIFIED ON 3.2
Onyx2	IS NOT QUALIFIED ON 3.2
Moosehead (R5k ONLY)	QUALIFIED on 6.3
Indigo2 R10k Max Impact	QUALIFIED on 6.2
Indigo2 R10k High Impact	QUALIFIED on 6.2
Indigo2 R10k Solid Impact	QUALIFIED on 6.2
Indigo2 Max Impact	QUALIFIED on 6.2
Indigo2 High Impact	QUALIFIED on 6.2
Indigo2 Solid Impact	QUALIFIED on 6.2
All other Indigo2	QUALIFIED on 6.2
Indy	QUALIFIED on 6.2
Indy R5000	QUALIFIED on 6.2
Indigo	QUALIFIED on 6.2
Onyx RE2	QUALIFIED on 6.2
Crimson RE	QUALIFIED on 6.2

	Software brushes only; hardware brushes and certain other advanced features are not available for Indy, Indigo, & Indigo2
	You can now run software brushes on hardware that is hardware-brush capable. A warning that performance is reduced will be presented to the user. In previous releases, if a system possessed hardware brushes, StudioPaint would not run unless the hardware brushes were purchased.
	Patch 1406 should be installed.
	Hardware brushes and other advanced features are included on all these systems
	Requires Texture Mezzanine Option [4mb of TRAM (texture memory)]
	Patch 1447 should be installed.

© 2000 Alias, a division of Silicon Graphics Limited. All rights reserved.