Sets a NurbsSurfaceMesh from a complete data description of the mesh. This is only available from scripted operators. Note: If you use it on a object with some clusters and you change the topology the burden of updating the clusters is on the user. For non-scripted operators this property can only be set if the object has been frozen.

NurbsSurfaceMesh.Set( Object in_vsalCount, Object in_vsaUVControlPoints, Object in_vsaNbUControlPoints, Object in_vsaNbVControlPoints, Object in_vsadUKnots, Object in_vsaNbUKnots, Object in_vsadVKnots, Object in_vsaNbVKnots, Object in_vsabUClosed, Object in_vsabVClosed, Object in_vsalUDegree, Object in_vsalVDegree, Object in_vsaeUParam, Object in_vsaeVParam, siNurbsFormat in_eNurbsFormat );

NurbsSurfaceMesh.Set( Count, UVControlPoints, [NbUControlPoints], [NbVControlPoints], [UKnots], [NbUKnots], [VKnots], [NbVKnots], [UClosed], [VClosed], [UDegree], [VDegree], [UParam], [VParam], [NurbsFormat] );

Parameter	Type	Description
Count	Long	Number of NurbsSurface in the mesh.
UVControlPoints	1D Array	The control points are stored in a 1 dimensional array. The array must contain the number of U control points, followed by the number of V control points, followed by the sequence of x,y,z,w values e.g. {NbU, NbV, Xo,Yo,Zo,Wo...X(n-1),Y(n-1),Z(n-1),W(n-1)}.
NbUControlPoints	Array of Longs	Specifies the number of U ControlPoints per NurbsCurve.
NbVControlPoints	Array of Longs	Specifies the number of V ControlPoints per NurbsCurve.
UKnots	Array of Doubles	An array of knot values in U direction.
NbUKnots	Array of Longs	Specifies the number of U Knots per NurbsCurve.
VKnots	Array of Doubles	An array of knot values in V direction.
NbVKnots	Array of Longs	Specifies the number of V Knots per NurbsCurve.
UClosed	Array of Boolean values	Specifies whether the nurbs surface is closed in U direction.
VClosed	Array of Boolean values	Specifies whether the nurbs surface is closed in V direction.
UDegree	Array of Longs	Degree of the nurbs surface in U direction.
VDegree	Array of Longs	Degree of the nurbs surface in V direction.
UParam	Array of siKnotParameterization values	The parameterization factor of the nurbs surface in U direction.
VParam	Array of siKnotParameterization values	The parameterization factor of the nurbs surface in V direction.
NurbsFormat	siNurbsFormat	Specifies how the data is formatted. Default Value: siSINurbs

VBScript Example

Dim lDegree(2), bClosed(2), eParameterization(2), aControlPoints, aKnots(2), aNbKnots(2), aNbControlVertex(2), lCount
set oRoot = Application.activeproject.activescene.root
set oGrid1 = oRoot.AddGeometry("Grid", "NurbsSurface")
oGrid1.Kinematics.Global.Parameters("posx").value = oG
set oGrid2 = oRoot.AddGeometry("Grid", "NurbsSurface")
oGrid2.Kinematics.Global.Parameters("posx").value = oGrid1.Kinematics.Global.Parameters("posx").value - 4.0
SelectObj oGrid2
AddToSelection oGrid1
SIAssembleNurbsMesh , 0.150, False, False, True
SelectObj "surfmsh"
set oAssembledSurface = selection(0)
'We must freeze the object so that Set call succeeds
FreezeObj oAssembledSurface
oAssembledSurface.ActivePrimitive.Geometry.Get _		
	siSINurbs, _
	lCount, _
	aControlVertex, aNbControlVertex(siUDirection), aNbControlVertex(siVDirection), _
	aKnots(siUDirection), aNbKnots(siUDirection), aKnots(siVDirection) , aNbKnots(siVDirection), _
	bClosed(siUDirection),bClosed(siVDirection), _
	lDegree(siUDirection),lDegree(siVDirection), _
	eParameterization(siUDirection),eParameterization(siVDirection)
'Making a tunnel
l_total = 0
for k = 0 to lCount - 1
	for i = 0 to aNbControlVertex(siVDirection)(k) - 1
		for j = 0 to aNbControlVertex(siUDirection)(k) - 1
			aControlVertex(1,i, j + l_total) = aControlVertex(1,i,j + l_total) + (aNbControlVertex(siVDirection)(k)/2 - abs( aNbControlVertex(siVDirection)(k)/2 - i))
		next
	next
	l_total = l_total + aNbControlVertex(siUDirection)(k)
next
oAssembledSurface.ActivePrimitive.Geometry.Set _		
	lCount, _
	aControlVertex, aNbControlVertex(siUDirection), aNbControlVertex(siVDirection), _
	aKnots(siUDirection), aNbKnots(siUDirection), aKnots(siVDirection) , aNbKnots(siVDirection), _
	bClosed(siUDirection),bClosed(siVDirection), _
	lDegree(siUDirection),lDegree(siVDirection), _
	eParameterization(siUDirection),eParameterization(siVDirection), _
	siSINurbs