class counterpart of mel function rigidBody
This command creates a rigid body from a polygonal or nurbs surface.
Deletes the cache (if one exists) of the rigid body.
Derived from mel command maya.cmds.rigidBody
Creates a rigid body that is active. An active rigid body accepts and causes collisions and is effected by dynamic fields. This is the default.
Derived from mel command maya.cmds.rigidBody
Current angular velocity of rigid body.
Derived from mel command maya.cmds.rigidBody
Determines how forces are applied to the rigid body. The choices are centerOfMass | boundingBox | verticesOrCVs. Default: boundingBox
Derived from mel command maya.cmds.rigidBody
Sets the restitution (or bounciness) of the rigid body. Range: 0.0 - 2.0 Default: 0.6
Derived from mel command maya.cmds.rigidBody
Turns caching on (1) or off (0) for the rigid body. Default: off
Derived from mel command maya.cmds.rigidBody
Sets the center of mass (x,y,z) of the rigid body. Default: actual center of mass.
Derived from mel command maya.cmds.rigidBody
Truns collisions on/off for the rigid body. If the collisions are turned of the rigid body will not collide with any other rigid body. Default: on.
Derived from mel command maya.cmds.rigidBody
returns the current contact count for the rigid body.
Derived from mel command maya.cmds.rigidBody
returns all the rigid body names which are in contact with this shape. One name for each contact will be returned.Flag can appear in Create mode of commandFlag can have multiple arguments, passed either as a tuple or a list.
Derived from mel command maya.cmds.rigidBody
returns all the contact position. One position for each contact will be returned.
Derived from mel command maya.cmds.rigidBody
Sets the damping value of the rigid body. Range: -2.0 - 2.0 Default: 0.0
Derived from mel command maya.cmds.rigidBody
Sets the dynamic friction for the rigid body. Range: 0.0 - 1.0 Default: 0.2
Derived from mel command maya.cmds.rigidBody
Current force on the rigid body.
Derived from mel command maya.cmds.rigidBody
Causes the rigid body to be ignored in the rigid solver. Default: off
Derived from mel command maya.cmds.rigidBody
Sets the initial angular velocity of the rigid body. Default: 0.0 0.0 0.0
Derived from mel command maya.cmds.rigidBody
Sets the initial velocity of the rigid body. Default: 0.0 0.0 0.0
Derived from mel command maya.cmds.rigidBody
Sets the collision layer of the rigid body. Only rigid bodies in the same collision layer can collide with each other. Range: = 0 Default: 0.
Derived from mel command maya.cmds.rigidBody
Locks the center of mass for the rigid body. Default: off
Derived from mel command maya.cmds.rigidBody
Sets the mass of the rigid body. Range: 0 Default: 1.0
Derived from mel command maya.cmds.rigidBody
Sets the initial orientation (x,y,z) of the rigid body. Default: current orientation.
Derived from mel command maya.cmds.rigidBody
Turns the ability for a rigid body to collide with particles on and off. The particles will exert a force on the rigid body. Default: off
Derived from mel command maya.cmds.rigidBody
Creates a rigid body that is passive. A passive rigid body does not react to collisions but active rigid bodies can collide with it. Dynamic Fields will not effect a passive rigid body. Only passive rigid bodies can be keyframed.
Derived from mel command maya.cmds.rigidBody
Sets the initial position (x,y,z) of the rigid body. Default: current position.
Derived from mel command maya.cmds.rigidBody
The name of the solver which this rigid node is to resided. If the solver does not exists then the rigid body will not be created. If the edit flag is thrown add the solver exists, the rigid body will be moved to that solver.
Derived from mel command maya.cmds.rigidBody
Causes the simulator to use a stand in object for the simulation. The choices are none | cube | sphere. The default is none. Default: none
Derived from mel command maya.cmds.rigidBody
Sets the static friction for the rigid body. Range: 0.0 - 1.0 Default: 0.2
Derived from mel command maya.cmds.rigidBody
Sets the tesselation factor for a rigid body surface. Range: = 10 Default: 200.
Derived from mel command maya.cmds.rigidBody
Current velocity of rigid body.
Derived from mel command maya.cmds.rigidBody
Applies an impulse (instantaneous) force on a rigid body. Default: 0.0 0.0 0.0
Derived from mel command maya.cmds.rigidBody
The position at which the impulse is applied. Default: the bodies center of mass.
Derived from mel command maya.cmds.rigidBody
Creates a rigid body that is active. An active rigid body accepts and causes collisions and is effected by dynamic fields. This is the default.
Derived from mel command maya.cmds.rigidBody
Determines how forces are applied to the rigid body. The choices are centerOfMass | boundingBox | verticesOrCVs. Default: boundingBox
Derived from mel command maya.cmds.rigidBody
Sets the restitution (or bounciness) of the rigid body. Range: 0.0 - 2.0 Default: 0.6
Derived from mel command maya.cmds.rigidBody
Turns caching on (1) or off (0) for the rigid body. Default: off
Derived from mel command maya.cmds.rigidBody
Sets the center of mass (x,y,z) of the rigid body. Default: actual center of mass.
Derived from mel command maya.cmds.rigidBody
Truns collisions on/off for the rigid body. If the collisions are turned of the rigid body will not collide with any other rigid body. Default: on.
Derived from mel command maya.cmds.rigidBody
Sets the damping value of the rigid body. Range: -2.0 - 2.0 Default: 0.0
Derived from mel command maya.cmds.rigidBody
Sets the dynamic friction for the rigid body. Range: 0.0 - 1.0 Default: 0.2
Derived from mel command maya.cmds.rigidBody
Causes the rigid body to be ignored in the rigid solver. Default: off
Derived from mel command maya.cmds.rigidBody
Sets the initial angular velocity of the rigid body. Default: 0.0 0.0 0.0
Derived from mel command maya.cmds.rigidBody
Sets the initial velocity of the rigid body. Default: 0.0 0.0 0.0
Derived from mel command maya.cmds.rigidBody
Sets the collision layer of the rigid body. Only rigid bodies in the same collision layer can collide with each other. Range: = 0 Default: 0.
Derived from mel command maya.cmds.rigidBody
Locks the center of mass for the rigid body. Default: off
Derived from mel command maya.cmds.rigidBody
Sets the mass of the rigid body. Range: 0 Default: 1.0
Derived from mel command maya.cmds.rigidBody
Sets the initial orientation (x,y,z) of the rigid body. Default: current orientation.
Derived from mel command maya.cmds.rigidBody
Turns the ability for a rigid body to collide with particles on and off. The particles will exert a force on the rigid body. Default: off
Derived from mel command maya.cmds.rigidBody
Creates a rigid body that is passive. A passive rigid body does not react to collisions but active rigid bodies can collide with it. Dynamic Fields will not effect a passive rigid body. Only passive rigid bodies can be keyframed.
Derived from mel command maya.cmds.rigidBody
Sets the initial position (x,y,z) of the rigid body. Default: current position.
Derived from mel command maya.cmds.rigidBody
The name of the solver which this rigid node is to resided. If the solver does not exists then the rigid body will not be created. If the edit flag is thrown add the solver exists, the rigid body will be moved to that solver.
Derived from mel command maya.cmds.rigidBody
Causes the simulator to use a stand in object for the simulation. The choices are none | cube | sphere. The default is none. Default: none
Derived from mel command maya.cmds.rigidBody
Sets the static friction for the rigid body. Range: 0.0 - 1.0 Default: 0.2
Derived from mel command maya.cmds.rigidBody
Applies an spin impulse (instantaneous rotational) force on a rigid body. Default: 0.0 0.0 0.0
Derived from mel command maya.cmds.rigidBody