class counterpart of mel function polyMoveEdge
Modifies edges of a polygonal object. Translate, move, rotate or scale edges.
Toggle caching for all attributes so that no recomputation is needed
Derived from mel command maya.cmds.polyMoveEdge
Turn the construction history on or off (where applicable). If construction history is on then the corresponding node will be inserted into the history chain for the mesh. If construction history is off then the operation will be performed directly on the object.Note:If the object already has construction history then this flag is ignored and the node will always be inserted into the history chain.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies the local center on the edge : 0 - Middle point, 1 - Start point, 2 - End point.C: Default is 0 (Middle point).Common flags
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies the X axis for local space.C: Default is 0.0 0.0 1.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies X coord of the X axis.C: Default is 0.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies Y coord of the X axis.C: Default is 0.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies Z coord of the X axis.C: Default is 1.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies the local rotations : (twistRot, slantRot, slantRoll).C: Default is 0.0 0.0 0.0. Local rotation (twistRot, slantRot, slantRoll).
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies local rotation X angle (Twist around normal)C: Default is 0.0. The range is [0, 360].
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies local rotation Y angle (Slant Rot around slantAxis).C: Default is 0.0. The range is [0, 360].
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies local rotation Z angle (Slant Roll of slantAxis).C: Default is 0.0. The range is [0, 180].
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies the local scaling vector.C: Default is 1.0 1.0 1.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies X for local scaling vector.C: Default is 1.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies Y for local scaling vector.C: Default is 1.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies Z for local scaling vector.C: Default is 1.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies the local translation vector.C: Default is 0.0 0.0 0.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies the local X translation.C: Default is 0.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies the local Y translation.C: Default is 0.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies the local Z translation.C: Default is 0.0.
Derived from mel command maya.cmds.polyMoveEdge
Defines how to evaluate the node. 0: Normal1: PassThrough2: Blocking3: Internally disabled. Will return to Normal state when enabled4: Internally disabled. Will return to PassThrough state when enabled5: Internally disabled. Will return to Blocking state when enabledFlag can appear in Create mode of commandFlag can have multiple arguments, passed either as a tuple or a list.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies the pivot for scaling and rotation.C: Default is 0.0 0.0 0.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies the X pivot for scaling and rotation.C: Default is 0.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies the Y pivot for scaling and rotation.C: Default is 0.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies the Z pivot for scaling and rotation.C: Default is 0.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies the random value for all parameters.C: Default is 0.0. The range is [-10.0, 10.0]. Local Values
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies the rotation angles around X, Y, Z.C: Default is 0.0 0.0 0.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies the rotation angle around X.C: Default is 0.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies the rotation angle around Y.C: Default is 0.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies the rotation angle around Z.C: Default is 0.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies the scaling vector.C: Default is 1.0 1.0 1.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies X for scaling vector.C: Default is 1.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies Y for scaling vector.C: Default is 1.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies Z for scaling vector.C: Default is 1.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies the translation vector.C: Default is 0.0 0.0 0.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies the X translation vector.C: Default is 0.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies the Y translation vector.C: Default is 0.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies the Z translation vector.C: Default is 0.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies which reference to use. If on : all geometrical values are taken in world reference. If off : all geometrical values are taken in object reference.C: Default is off.Global Values
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies the local center on the edge : 0 - Middle point, 1 - Start point, 2 - End point.C: Default is 0 (Middle point).Common flags
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies the X axis for local space.C: Default is 0.0 0.0 1.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies X coord of the X axis.C: Default is 0.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies Y coord of the X axis.C: Default is 0.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies Z coord of the X axis.C: Default is 1.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies the local rotations : (twistRot, slantRot, slantRoll).C: Default is 0.0 0.0 0.0. Local rotation (twistRot, slantRot, slantRoll).
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies local rotation X angle (Twist around normal)C: Default is 0.0. The range is [0, 360].
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies local rotation Y angle (Slant Rot around slantAxis).C: Default is 0.0. The range is [0, 360].
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies local rotation Z angle (Slant Roll of slantAxis).C: Default is 0.0. The range is [0, 180].
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies the local scaling vector.C: Default is 1.0 1.0 1.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies X for local scaling vector.C: Default is 1.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies Y for local scaling vector.C: Default is 1.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies Z for local scaling vector.C: Default is 1.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies the local translation vector.C: Default is 0.0 0.0 0.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies the local X translation.C: Default is 0.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies the local Y translation.C: Default is 0.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies the local Z translation.C: Default is 0.0.
Derived from mel command maya.cmds.polyMoveEdge
Defines how to evaluate the node. 0: Normal1: PassThrough2: Blocking3: Internally disabled. Will return to Normal state when enabled4: Internally disabled. Will return to PassThrough state when enabled5: Internally disabled. Will return to Blocking state when enabledFlag can appear in Create mode of commandFlag can have multiple arguments, passed either as a tuple or a list.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies the pivot for scaling and rotation.C: Default is 0.0 0.0 0.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies the X pivot for scaling and rotation.C: Default is 0.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies the Y pivot for scaling and rotation.C: Default is 0.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies the Z pivot for scaling and rotation.C: Default is 0.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies the random value for all parameters.C: Default is 0.0. The range is [-10.0, 10.0]. Local Values
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies the rotation angles around X, Y, Z.C: Default is 0.0 0.0 0.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies the rotation angle around X.C: Default is 0.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies the rotation angle around Y.C: Default is 0.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies the rotation angle around Z.C: Default is 0.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies the scaling vector.C: Default is 1.0 1.0 1.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies X for scaling vector.C: Default is 1.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies Y for scaling vector.C: Default is 1.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies Z for scaling vector.C: Default is 1.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies the translation vector.C: Default is 0.0 0.0 0.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies the X translation vector.C: Default is 0.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies the Y translation vector.C: Default is 0.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies the Z translation vector.C: Default is 0.0.
Derived from mel command maya.cmds.polyMoveEdge
This flag specifies which reference to use. If on : all geometrical values are taken in world reference. If off : all geometrical values are taken in object reference.C: Default is off.Global Values
Derived from mel command maya.cmds.polyMoveEdge