paneLayout is undoable, queryable, and editable.
This command creates a pane layout. A pane layout may have any
number of children but at any one time only certain children may be
visible, as determined by the current layout configuration. For
example a horizontally split pane shows only two children, one on top
of the other and a visible separator between the two. The separator
may be moved to vary the size of each pane. Various other pane
configurations are available and all display a moveable separator
that define the size of each pane in the layout.
In query mode, return type is based on queried flag.
| Long name (short name) |
Argument types |
Properties |
exists(ex)
|
boolean
|
|
|
Returns true|false depending upon whether the
specified object exists. Other flags are ignored.
|
|
defineTemplate(dt)
|
string
|
|
|
Puts a command in a mode where any other flags and args are
parsed and added to the command template specified in the argument.
They will be used as default arguments in any subsequent
invocations of the command when templateName is set as the
current template.
|
|
useTemplate(ut)
|
string
|
|
|
Force the command to use a command template other than
the current one.
|
|
parent(p)
|
string
|
|
|
The parent layout for this control.
|
|
enable(en)
|
boolean
|
|
|
The enable state of the control. By default, this flag is
set to true and the control is enabled. Specify false and the control
will appear dimmed or greyed-out indicating it is disabled.
|
|
width(w)
|
int
|
|
|
The width of the control. The control will attempt to
be this size if it is not overruled by parent layout conditions.
|
|
height(h)
|
int
|
|
|
The height of the control. The control will attempt to
be this size if it is not overruled by parent layout conditions.
|
|
visible(vis)
|
boolean
|
|
|
The visible state of the control. A control is created
visible by default. Note that a control's actual appearance is
also dependent on the visible state of its parent layout(s).
|
|
visibleChangeCommand(vcc)
|
script
|
|
|
Command that gets executed when visible state of the control changes.
|
|
isObscured(io)
|
boolean
|
|
|
Return whether the control can actually be seen by the user.
The control will be obscured if its state is invisible, if it is
blocked (entirely or partially) by some other control, if it or a
parent layout is unmanaged, or if the control's window is
invisible or iconified.
|
|
manage(m)
|
boolean
|
|
|
Manage state of the control. An unmanaged control is
not visible, nor does it take up any screen real estate. All
controls are created managed by default.
|
|
numberOfPopupMenus(npm)
|
boolean
|
|
|
Return the number of popup menus attached to this control.
|
|
popupMenuArray(pma)
|
boolean
|
|
|
Return the names of all the popup menus attached to this
control.
|
|
preventOverride(po)
|
boolean
|
|
|
If true, this flag disallows overriding the control's
attribute via the control's right mouse button menu.
|
|
annotation(ann)
|
string
|
|
|
Annotate the control with an extra string value.
|
|
backgroundColor(bgc)
|
[float, float, float]
|
|
|
The background color of the control. The arguments correspond
to the red, green, and blue color components. Each component ranges
in value from 0.0 to 1.0.
When setting backgroundColor, the background is automatically
enabled, unless enableBackground is also specified with a false
value.
|
|
noBackground(nbg)
|
boolean
|
|
|
Clear/reset the control's background.
Passing true means the background should not be drawn at all, false means the background should be drawn. The state of this flag is inherited by children of this control.
|
|
enableBackground(ebg)
|
boolean
|
|
|
Enables the background color of the control.
|
|
docTag(dtg)
|
string
|
|
|
Add a documentation flag to the control. The documentation flag
has a directory structure like hierarchy.
Eg. -dt render/multiLister/createNode/material
|
|
dragCallback(dgc)
|
script
|
|
|
Adds a callback that is called when the middle mouse button
is pressed. The MEL version of the callback is of the form:
global proc string[] callbackName(string $dragControl, int $x, int $y, int $mods)
The proc returns a string array that is transferred to the drop site.
By convention the first string in the array describes the user settable
message type. Controls that are application defined drag sources may
ignore the callback. $mods allows testing for the key modifiers CTL and
SHIFT. Possible values are 0 == No modifiers, 1 == SHIFT, 2 == CTL,
3 == CTL + SHIFT.
In Python, it is similar, but there are two ways to specify the callback. The
recommended way is to pass a Python function object as the argument. In that
case, the Python callback should have the form:
def callbackName( dragControl, x, y, modifiers ):
The values of these arguments are the same as those for the MEL version above.
The other way to specify the callback in Python is to specify a string to be
executed. In that case, the string will have the values substituted into it
via the standard Python format operator. The format values are passed in a
dictionary with the keys "dragControl", "x", "y", "modifiers". The
"dragControl" value is a string and the other values are integers (eg the
callback string could be "print '%(dragControl)s %(x)d %(y)d %(modifiers)d'")
|
|
dropCallback(dpc)
|
script
|
|
|
Adds a callback that is called when a drag and drop
operation is released above the drop site. The MEL version of the callback is
of the form:
global proc callbackName(string $dragControl, string $dropControl, string $msgs[], int $x, int $y, int $type)
The proc receives a string array that is transferred from the drag source.
The first string in the msgs array describes the user defined message type.
Controls that are application defined drop sites may ignore the
callback. $type can have values of 1 == Move, 2 == Copy, 3 == Link.
In Python, it is similar, but there are two ways to specify the callback. The
recommended way is to pass a Python function object as the argument. In that
case, the Python callback should have the form:
def pythonDropTest( dragControl, dropControl, messages, x, y, dragType ):
The values of these arguments are the same as those for the MEL version above.
The other way to specify the callback in Python is to specify a string to be
executed. In that case, the string will have the values substituted into it
via the standard Python format operator. The format values are passed in a
dictionary with the keys "dragControl", "dropControl", "messages", "x", "y",
"type". The "dragControl" value is a string and the other values are integers
(eg the callback string could be
"print '%(dragControl)s %(dropControl)s %(messages)r %(x)d %(y)d %(type)d'")
|
|
fullPathName(fpn)
|
string
|
|
|
Return the full path name of the widget, which includes all the parents
|
|
numberOfChildren(nch)
|
boolean
|
|
|
Returns in an int the number of immediate children of the layout.
|
|
childArray(ca)
|
boolean
|
|
|
Returns a string array of the names of the layout's
immediate children.
|
|
configuration(cn)
|
string
|
|
|
Set the layout configuration for the panes. Valid values
are:
"single", "horizontal2", "vertical2", "horizontal3", "vertical3",
"top3", "left3", "bottom3", "right3", "horizontal4", "vertical4",
"top4", "left4", "bottom4", "right4", "quad"
|
|
setPane(sp)
|
[string, int]
|
|
|
This flag allows you to put a child of this layout in a
particular pane. The first argument is the full or short name of
the control. The second argument is an integer value ranging from
1 to 4. Panes for any particular configuration are numbered
clockwise beginning with the pane in the top left corner of the
layout.
|
|
activePane(ap)
|
string
|
|
|
The active pane has a colored border surrounding it. Only
one pane may be active at any one time. Using either of the
flags -ap/activePane or -api/activePaneIndex will
automatically deactivate the previously active pane. The argument
is the full or short name of the child control.
|
|
activePaneIndex(api)
|
int
|
|
|
The active pane index. The active pane has a
colored border surrounding it. Only one pane may be active
at any one time. Using either of the flags -ap/activePane
or -api/activePaneIndex will automatically deactivate the
previously active pane. The argument is an integer
value ranging from 1 to 4. Panes for any particular configuration
are numbered clockwise beginning with the pane in the top left
corner of the layout. If any other index is specified then the
current active pane is deactivated.
|
|
activeFrameThickness(aft)
|
int
|
|
|
The thickness of the frame drawn around the active frame.
Specify an integer value greater than or equal to 0.
|
|
separatorThickness(st)
|
int
|
|
|
The thickness of the separators between the panes.
Specify an integer value greater than 0. This flag has no effect
on Windows systems.
|
|
paneSize(ps)
|
[int, int, int]
|
|
|
The size of a pane in the current pane layout
configuration. The first argument specifies the pane index and
is an integer value ranging from 1 to 4. Panes for any particular
configuration are numbered clockwise beginning with the pane in
the top left corner of the layout. The width and height of the
pane are specified by the last two arguments. Both are
integer values and they indicate the percentage of the total
pane layout size rather that the number of pixels.
|
|
pane1(p1)
|
boolean
|
|
|
|
pane2(p2)
|
boolean
|
|
|
|
pane3(p3)
|
boolean
|
|
|
|
pane4(p4)
|
boolean
|
|
|
Return the name of the control in the respective pane.
|
|
paneUnderPointer(pup)
|
boolean
|
|
|
Return the name of the child occupying the
pane that the pointer is currently over. An empty string is
returned if the pointer is not over a pane.
|
|
staticWidthPane(swp)
|
int
|
|
|
Set a pane to have a static width, i.e. its width will not
change when the layout is dynamically resized. Only one pane
can be set to have a static width at one time. This state
will be retained even if another child is switched into the
pane. Specify 0 to set a pane back to the default state. Any
state will be lost if the pane configuration is changed.
|
|
staticHeightPane(shp)
|
int
|
|
|
Set a pane to have a static height, i.e. its height will not
change when the layout is dynamically resized. Only one pane
can be set to have a static height at one time. This state
will be retained even if another child is switched into the
pane. Specify 0 to set a pane back to the default state. Any
state will be lost if the pane configuration is changed.
|
|
numberOfVisiblePanes(nvp)
|
boolean
|
|
|
Return the number of panes visible for the present
configuration.
|
|
separatorMovedCommand(smc)
|
script
|
|
|
This command executed when the pane separators are moved.
|
|