setAttr command

Go to: Synopsis. Return value. Related. Flags. MEL examples.

Synopsis

setAttr [-alteredValue] [-caching boolean] [-capacityHint uint] [-channelBox boolean] [-clamp] [-keyable boolean] [-lock boolean] [-size uint] [-type string] attribute Any [Any...]

setAttr is undoable, queryable, and editable.

Sets the value of a dependency node attribute. No value for the the attribute is needed when the -l/-k/-s flags are used. The -type flag is only required when setting a non-numeric attribute.

The following chart outlines the syntax of setAttr for non-numeric data types:

{TYPE} below means any number of values of type TYPE, separated by a space
[TYPE] means that the value of type TYPE is optional
A|B means that either of A or B may appear

In order to run its examples, first execute these commands to create the sample attribute types:


sphere -n node;
addAttr -ln short2Attr -at short2;
addAttr -ln short2a -p short2Attr -at short;
addAttr -ln short2b -p short2Attr -at short;
addAttr -ln short3Attr -at short3;
addAttr -ln short3a -p short3Attr -at short;
addAttr -ln short3b -p short3Attr -at short;
addAttr -ln short3c -p short3Attr -at short;
addAttr -ln long2Attr -at long2;
addAttr -ln long2a -p long2Attr -at long;
addAttr -ln long2b -p long2Attr -at long;
addAttr -ln long3Attr -at long3;
addAttr -ln long3a -p long3Attr -at long;
addAttr -ln long3b -p long3Attr -at long;
addAttr -ln long3c -p long3Attr -at long;
addAttr -ln float2Attr -at float2;
addAttr -ln float2a -p float2Attr -at "float";
addAttr -ln float2b -p float2Attr -at "float";
addAttr -ln float3Attr -at float3;
addAttr -ln float3a -p float3Attr -at "float";
addAttr -ln float3b -p float3Attr -at "float";
addAttr -ln float3c -p float3Attr -at "float";
addAttr -ln double2Attr -at double2;
addAttr -ln double2a -p double2Attr -at double;
addAttr -ln double2b -p double2Attr -at double;
addAttr -ln double3Attr -at double3;
addAttr -ln double3a -p double3Attr -at double;
addAttr -ln double3b -p double3Attr -at double;
addAttr -ln double3c -p double3Attr -at double;
addAttr -ln int32ArrayAttr -dt Int32Array;
addAttr -ln doubleArrayAttr -dt doubleArray;
addAttr -ln pointArrayAttr -dt pointArray;
addAttr -ln vectorArrayAttr -dt vectorArray;
addAttr -ln stringArrayAttr -dt stringArray;
addAttr -ln stringAttr -dt "string";
addAttr -ln matrixAttr -dt "matrix";
addAttr -ln sphereAttr -dt sphere;
addAttr -ln coneAttr -dt cone;
addAttr -ln meshAttr -dt mesh;
addAttr -ln latticeAttr -dt lattice;
addAttr -ln spectrumRGBAttr -dt spectrumRGB;
addAttr -ln reflectanceRGBAttr -dt reflectanceRGB;
addAttr -ln componentListAttr -dt componentList;
addAttr -ln attrAliasAttr -dt attributeAlias;
addAttr -ln curveAttr -dt nurbsCurve;
addAttr -ln surfaceAttr -dt nurbsSurface;
addAttr -ln trimFaceAttr -dt nurbsTrimface;
addAttr -ln polyFaceAttr -dt polyFaces;

-type short2

Array of two short integers

Value Syntax short short

Value Meaning value1 value2

Mel Example setAttr node.short2Attr -type short2 1 2;

Python Example cmds.setAttr('node.short2Attr',1,2,type='short2')

-type short3

Array of three short integers

Value Syntax short short short

Value Meaning value1 value2 value3

Mel Example setAttr node.short3Attr -type short3 1 2 3;

Python Example cmds.setAttr('node.short3Attr',1,2,3,type='short3')

-type long2

Array of two long integers

Value Syntax long long

Value Meaning value1 value2

Mel Example setAttr node.long2Attr -type long2 1000000 2000000;

Python Example cmds.setAttr('node.long2Attr',1000000,2000000,type='long2')

-type long3

Array of three long integers

Value Syntax long long long

Value Meaning value1 value2 value3

Mel Example setAttr node.long3Attr -type long3 1000000 2000000 3000000;

Python Example cmds.setAttr('node.long3Attr',1000000,2000000,3000000,type='long3')

-type Int32Array

Variable length array of long integers

Value Syntax int {int}

Value Meaning numberOfArrayValues {arrayValue}

Mel Example setAttr node.int32ArrayAttr -type Int32Array 2 12 75;

Python Example cmds.setAttr('node.int32ArrayAttr',[2,12,75],type='Int32Array')

-type float2

Array of two floats

Value Syntax float float

Value Meaning value1 value2

Mel Example setAttr node.float2Attr -type float2 1.1 2.2;

Python Example cmds.setAttr('node.float2Attr',1.1,2.2,type='float2')

-type float3

Array of three floats

Value Syntax float float float

Value Meaning value1 value2 value3

Mel Example setAttr node.float3Attr -type float3 1.1 2.2 3.3;

Python Example cmds.setAttr('node.float3Attr',1.1,2.2,3.3,type='float3')

-type double2

Array of two doubles

Value Syntax double double

Value Meaning value1 value2

Mel Example setAttr node.double2Attr -type double2 1.1 2.2;

Python Example cmds.setAttr('node.double2Attr',1.1,2.2,type='double2')

-type double3

Array of three doubles

Value Syntax double double double

Value Meaning value1 value2 value3

Mel Example setAttr node.double3Attr -type double3 1.1 2.2 3.3;

Python Example cmds.setAttr('node.double3Attr',1.1,2.2,3.3,type='double3')

-type doubleArray

Variable length array of doubles

Value Syntax int {double}

Value Meaning numberOfArrayValues {arrayValue}

Mel Example setAttr node.doubleArrayAttr -type doubleArray 2 3.14159 2.782;

Python Example cmds.setAttr( "node.doubleArrayAttr", (2, 3.14159, 2.782,), type="doubleArray")

-type matrix

4x4 matrix of doubles

Value Syntax double double double double
double double double double
double double double double
double double double double

Value Meaning row1col1 row1col2 row1col3 row1col4
row2col1 row2col2 row2col3 row2col4
row3col1 row3col2 row3col3 row3col4
row4col1 row4col2 row4col3 row4col4

Alternate Syntax string double double double
double double double
integer
double double double
double double double
double double double
double double double
double double double
double double double
double double double double
double double double double
double double double
boolean

Alternate Meaning "xform" scaleX scaleY scaleZ
rotateX rotateY rotateZ
rotationOrder (0=XYZ, 1=YZX, 2=ZXY, 3=XZY, 4=YXZ, 5=ZYX)
translateX translateY translateZ
shearXY shearXZ shearYZ
scalePivotX scalePivotY scalePivotZ
scaleTranslationX scaleTranslationY scaleTranslationZ
rotatePivotX rotatePivotY rotatePivotZ
rotateTranslationX rotateTranslationY rotateTranslationZ
rotateOrientW rotateOrientX rotateOrientY rotateOrientZ
jointOrientW jointOrientX jointOrientY jointOrientZ
inverseParentScaleX inverseParentScaleY inverseParentScaleZ
compensateForParentScale

Mel Example setAttr node.matrixAttr -type "matrix" 1 0 0 0 0 1 0 0 0 0 1 0 2 3 4 1;
setAttr node.matrixAttr -type "matrix" "xform" 1 1 1 0 0 0 0 2 3 4 0 0 0
0 0 0 0 0 0 0 0 0 0 0 1 1 0 0 1 0 1 0 1 1 1 0 false;

Python Example cmds.setAttr('node.matrixAttr',(1,0,0,0,0,1,0,0,0,0,1,0,2,3,4,1),type='matrix')
cmds.setAttr('node.matrixAttr','xform',(1,1,1),(0,0,0),0,(2,3,4),(0,0,0),
(0,0,0),(0,0,0),(0,0,0),(0,1,1),(0,0,1,0),(1,0,1,0),(1,2,3),False,type="matrix")

-type pointArray

Variable length array of points

Value Syntax int {double double double double}

Value Meaning numberOfArrayValues {xValue yValue zValue wValue}

Mel Example setAttr node.pointArrayAttr -type pointArray 2 1 1 1 1 2 2 2 1;

Python Example cmds.setAttr('node.pointArrayAttr',2,(1,1,1,1),(2,2,2,1),type='pointArray')

-type vectorArray

Variable length array of vectors

Value Syntax int {double double double}

Value Meaning numberOfArrayValues {xValue yValue zValue}

Mel Example setAttr node.vectorArrayAttr -type vectorArray 2 1 1 1 2 2 2;

Python Example cmds.setAttr('node.vectorArrayAttr',2,(1,1,1),(2,2,2),type='vectorArray')

-type "string"

Character string

Value Syntax string

Value Meaning characterStringValue

Mel Example setAttr node.stringAttr -type "string" "blarg";

Python Example cmds.setAttr('node.stringAttr',"blarg",type="string")

-type stringArray

Variable length array of strings

Value Syntax int {string}

Value Meaning numberOfArrayValues {arrayValue}

Mel Example setAttr node.stringArrayAttr -type stringArray 3 "a" "b" "c";

Python Example cmds.setAttr('node.stringArrayAttr',3,"a","b","c",type='stringArray')

-type sphere

Sphere data

Value Syntax double

Value Meaning sphereRadius

Example setAttr node.sphereAttr -type sphere 5.0;

-type cone

Cone data

Value Syntax double double

Value Meaning coneAngle coneCap

Mel Example setAttr node.coneAttr -type cone 45.0 5.0;

Python Example cmds.setAttr('node.coneAttr',45.0,5.0,type='cone')

-type reflectanceRGB

Reflectance data

Value Syntax double double double

Value Meaning redReflect greenReflect blueReflect

Mel Example setAttr node.reflectanceRGBAttr -type reflectanceRGB 0.5 0.5 0.1;

Python Example cmds.setAttr('node.reflectanceRGBAttr',0.5,0.5,0.1,type='reflectanceRGB')

-type spectrumRGB

Spectrum data

Value Syntax double double double

Value Meaning redSpectrum greenSpectrum blueSpectrum

Mel Example setAttr node.spectrumRGBAttr -type spectrumRGB 0.5 0.5 0.1;

Python Example cmds.setAttr('node.spectrumRGBAttr',0.5,0.5,0.1,type='spectrumRGB')

-type componentList

Variable length array of components

Value Syntax int {string}

Value Meaning numberOfComponents {componentName}

Mel Example setAttr node.componentListAttr -type componentList 3 cv[1] cv[12] cv[3];

Python Example cmds.setAttr('node.componentListAttr',3,'cv[1]','cv[12]','cv[3]',type='componentList')

-type attributeAlias

String alias data

Value Syntax string string

Value Meaning newAlias currentName

Mel Example setAttr node.attrAliasAttr -type attributeAlias
{"GoUp", "translateY", "GoLeft", "translateX"};

Python Example cmds.setAttr('node.attrAliasAttr',("GoUp", "translateY",
"GoLeft", "translateX"),type='attributeAlias')

-type nurbsCurve

NURBS curve data

Value Syntax int int int bool int int {double}
int {double double double}

Value Meaning degree spans form isRational dimension knotCount {knotValue}
cvCount {xCVValue yCVValue [zCVValue] [wCVValue]}

Mel Example // degree is the degree of the curve(range 1-7)
// spans is the number of spans
// form is open (0), closed (1), periodic (2)
// dimension is 2 or 3, depending on the dimension of the curve
// isRational is true if the curve CVs contain a rational component
// knotCount is the size of the knot list
// knotValue is a single entry in the knot list
// cvCount is the number of CVs in the curve
// xCVValue,yCVValue,[zCVValue] [wCVValue] is a single CV.
// zCVValue is only present when dimension is 3.
// wCVValue is only present when isRational is true.
//
setAttr node.curveAttr -type nurbsCurve 3 1 0 no 3
6 0 0 0 1 1 1
4 -2 3 0 -2 1 0 -2 -1 0 -2 -3 0;

-type nurbsSurface

NURBS surface data

Value Syntax int int int int bool
int {double}
int {double}
[string] int {double double double}

Value Meaning uDegree vDegree uForm vForm isRational
uKnotCount {uKnotValue}
vKnotCount {vKnotValue} ["TRIM"|"NOTRIM"] cvCount {xCVValue yCVValue zCVValue [wCVValue]}

Example // uDegree is degree of the surface in U direction (range 1-7)
// vDegree is degree of the surface in V direction (range 1-7)
// uForm is open (0), closed (1), periodic (2) in U direction
// vForm is open (0), closed (1), periodic (2) in V direction
// isRational is true if the surface CVs contain a rational component
// uKnotCount is the size of the U knot list
// uKnotValue is a single entry in the U knot list
// vKnotCount is the size of the V knot list
// vKnotValue is a single entry in the V knot list
// If "TRIM" is specified then additional trim information is expected
// If "NOTRIM" is specified then the surface is not trimmed
// cvCount is the number of CVs in the surface
// xCVValue,yCVValue,zCVValue [wCVValue]is a single CV.
// zCVValue is only present when dimension is 3.
// wCVValue is only present when isRational is true
//
setAttr node.surfaceAttr -type nurbsSurface 3 3 0 0 no
6 0 0 0 1 1 1
6 0 0 0 1 1 1
16 -2 3 0 -2 1 0 -2 -1 0 -2 -3 0
-1 3 0 -1 1 0 -1 -1 0 -1 -3 0
1 3 0 1 1 0 1 -1 0 1 -3 0
3 3 0 3 1 0 3 -1 0 3 -3 0;

-type nurbsTrimface

NURBS trim face data

Value Syntax bool int {int {int {int int int} int {int int}}}

Value Meaning flipNormal boundaryCount {boundaryType tedgeCountOnBoundary
{splineCountOnEdge {edgeTolerance isEdgeReversed geometricContinuity}
{splineCountOnPedge {isMonotone pedgeTolerance}}}

Example // flipNormal if true turns the surface inside out
// boundaryCount: number of boundaries
// boundaryType:
// tedgeCountOnBoundary : number of edges in a boundary
// splineCountOnEdge : number of splines in an edge in
// edgeTolerance : tolerance used to build the 3d edge
// isEdgeReversed : if true, the edge is backwards
// geometricContinuity : if true, the edge is tangent continuous
// splineCountOnPedge : number of splines in a 2d edge
// isMonotone : if true, curvature is monotone
// pedgeTolerance : tolerance for the 2d edge
//

-type polyFace

Polygon face data

Value Syntax {"f" int {int}}
{"h" int {int}}
{"mf" int {int}}
{"mh" int {int}}
{"mu" int int {int}}
{"fc" int {int}}

Value Meaning {"f" faceEdgeCount {edgeIdValue}}
{"h" holeEdgeCount {edgeIdValue}}
{"mf" faceUVCount {uvIdValue}}
{"mh" holeUVCount {uvIdValue}}
{"mu" uvSet faceUVCount {uvIdValue}}
{"fc" faceColorCount {colorIndexValue}}

Example // This data type (polyFace) is meant to be used in file I/O
// after setAttrs have been written out for vertex position
// arrays, edge connectivity arrays (with corresponding start
// and end vertex descriptions), texture coordinate arrays and
// color arrays. The reason is that this data type references
// all of its data through ids created by the former types.
//
// "f" specifies the ids of the edges making up a face -
// negative value if the edge is reversed in the face
// "h" specifies the ids of the edges making up a hole -
// negative value if the edge is reversed in the face
// "mf" specifies the ids of texture coordinates (uvs) for a face.
// This data type is obsolete as of version 3.0. It is replaced by "mu".
// "mh" specifies the ids of texture coordinates (uvs) for a hole
// This data type is obsolete as of version 3.0. It is replaced by "mu".
// "mu" The first argument refers to the uv set. This is a zero-based
// integer number. The second argument refers to the number of vertices (n)
// on the face which have valid uv values. The last n values are the uv
// ids of the texture coordinates (uvs) for the face. These indices
// are what used to be represented by the "mf" and "mh" specification.
// There may be more than one "mu" specification, one for each unique uv set.
// "fc" specifies the color index values for a face
//
setAttr node.polyFaceAttr -type polyFaces "f" 3 1 2 3 "fc" 3 4 4 6;

-type mesh

Polygonal mesh

Value Syntax {string [int {double double double}]}
{string [int {double double double}]}
[{string [int {double double}]}]
{string [int {double double string}]}

Value Meaning "v" [vertexCount {vertexX vertexY vertexZ}]
"vn" [normalCount {normalX normalY normalZ}]
["vt" [uvCount {uValue vValue}]]
"e" [edgeCount {startVertex endVertex "smooth"|"hard"}]

Example // "v" specifies the vertices of the polygonal mesh
// "vn" specifies the normal of each vertex
// "vt" is optional and specifies a U,V texture coordinate for each vertex
// "e" specifies the edge connectivity information between vertices
//
setAttr node.meshAttr -type mesh "v" 3 0 0 0 0 1 0 0 0 1
"vn" 3 1 0 0 1 0 0 1 0 0
"vt" 3 0 0 0 1 1 0
"e" 3 0 1 "hard" 1 2 "hard" 2 0 "hard";

-type lattice

Lattice data

Value Syntax int int int int {double double double}

Value Meaning sDivisionCount tDivisionCount uDivisionCount
pointCount {pointX pointY pointZ}

Example // sDivisionCount is the horizontal lattice division count
// tDivisionCount is the vertical lattice division count
// uDivisionCount is the depth lattice division count
// pointCount is the total number of lattice points
// pointX,pointY,pointZ is one lattice point. The list is
// specified varying first in S, then in T, last in U so the
// first two entries are (S=0,T=0,U=0) (s=1,T=0,U=0)
//
setAttr node.latticeAttr -type lattice 2 5 2 20
-2 -2 -2 2 -2 -2 -2 -1 -2 2 -1 -2 -2 0 -2
2 0 -2 -2 1 -2 2 1 -2 -2 2 -2 2 2 -2
-2 -2 2 2 -2 2 -2 -1 2 2 -1 2 -2 0 2
2 0 2 -2 1 2 2 1 2 -2 2 2 2 2 2;

Return value

None

In query mode, return type is based on queried flag.

addAttr, connectAttr, disconnectAttr, getAttr, listAttr

Flags

alteredValue, caching, capacityHint, channelBox, clamp, keyable, lock, size, type

Long name (short name) Argument types Properties

-keyable(-k) boolean

Sets the attribute's keyable state on or off.

-lock(-l) boolean

Sets the attribute's lock state on or off.

-channelBox(-cb) boolean

Sets the attribute's display in the channelBox on or off. Keyable attributes are always display in the channelBox regardless of the channelBox settting.

-caching(-ca) boolean

Sets the attribute's internal caching on or off. Not all attributes can be defined as caching. Only those attributes that are not defined by default to be cached can be made caching. As well, multi attribute elements cannot be made caching. Caching also affects child attributes for compound attributes.

-size(-s) uint

Defines the size of a multi-attribute array. This is only a hint, used to help allocate memory as efficiently as possible.

-type(-typ) string

Identifies the type of data. If the -type flag is not present, a numeric type is assumed.

-alteredValue(-av)

The value is only the current value, which may change in the next evalution (if the attribute has an incoming connection). This flag is only used during file I/O, so that attributes with incoming connections do not have their data overwritten during the first evaluation after a file is opened.

-clamp(-c)

For numeric attributes, if the value is outside the range of the attribute, clamp it to the min or max instead of failing

-capacityHint(-ch) uint

Used to provide a memory allocation hint to attributes where the -size flag cannot provide enough information. This flag is optional and is primarily intended to be used during file I/O. Only certain attributes make use of this flag, and the interpretation of the flag value varies per attribute. This flag is currently used by (node.attribute):

mesh.face - hints the total number of elements in the face edge lists

Flag can appear in Create mode of command	Flag can appear in Edit mode of command
Flag can appear in Query mode of command	Flag can be used more than once in a command.

MEL examples

sphere -n sphere;
// Set a simple numeric value
setAttr sphere.translateX 5;
// Lock an attribute to prevent further modification
setAttr -lock on sphere.translateX;
// Make an attribute unkeyable
setAttr -keyable off sphere.translateZ;
// Set an entire list of multi-attribute values in one command
setAttr -size 7 "sphereShape.weights[0:6]" 1 1 2 1 1 1 2;
// Set an attribute with a compound numeric type
setAttr "sphere.rotate" -type "double3" 0 45 90;
// Clamp the value of the attribute to the min/max
// Useful floating point math leaves the value just
// a little out of range - here the min is .01
setAttr -clamp "anisotropic1.roughness" 0.0099978;
// Set a multi-attribute with a compound numeric type
setAttr "sphereShape.controlPoints[0:2]" -type "double3" 0 0 0 1 1 1 2 2 2;

command (MEL)	Python version
setAttr	In categories: General, Attributes