toolButton

Go to: Synopsis. Return value. Flags. Python examples.

Synopsis

toolButton( [string] , [allowMultipleTools=boolean], [annotation=string], [backgroundColor=[float, float, float]], [changeCommand=script], [collection=string], [defineTemplate=string], [docTag=string], [doubleClickCommand=script], [dragCallback=script], [dropCallback=script], [enable=boolean], [enableBackground=boolean], [exists=boolean], [fullPathName=string], [height=int], [image1=string], [image2=string], [image3=string], [imageOverlayLabel=string], [isObscured=boolean], [manage=boolean], [numberOfPopupMenus=boolean], [offCommand=script], [onCommand=script], [parent=string], [popupIndicatorVisible=boolean], [popupMenuArray=boolean], [preventOverride=boolean], [select=boolean], [style=string], [tool=string], [toolArray=boolean], [toolCount=boolean], [toolImage1=[string, string]], [toolImage2=[string, string]], [toolImage3=[string, string]], [useTemplate=string], [visible=boolean], [visibleChangeCommand=script], [width=int])

Note: Strings representing object names and arguments must be separated by commas. This is not depicted in the synopsis.

toolButton is undoable, queryable, and editable.

Return value

In query mode, return type is based on queried flag.

Flags

Long name (short name)	Argument types	Properties
exists(ex)	boolean
Returns true|false depending upon whether the specified object exists. Other flags are ignored.
defineTemplate(dt)	string
Puts a command in a mode where any other flags and args are parsed and added to the command template specified in the argument. They will be used as default arguments in any subsequent invocations of the command when templateName is set as the current template.
useTemplate(ut)	string
Force the command to use a command template other than the current one.
parent(p)	string
The parent layout for this control.
enable(en)	boolean
The enable state of the control. By default, this flag is set to true and the control is enabled. Specify false and the control will appear dimmed or greyed-out indicating it is disabled.
width(w)	int
The width of the control. The control will attempt to be this size if it is not overruled by parent layout conditions.
height(h)	int
The height of the control. The control will attempt to be this size if it is not overruled by parent layout conditions.
visible(vis)	boolean
The visible state of the control. A control is created visible by default. Note that a control's actual appearance is also dependent on the visible state of its parent layout(s).
visibleChangeCommand(vcc)	script
Command that gets executed when visible state of the control changes.
isObscured(io)	boolean
Return whether the control can actually be seen by the user. The control will be obscured if its state is invisible, if it is blocked (entirely or partially) by some other control, if it or a parent layout is unmanaged, or if the control's window is invisible or iconified.
manage(m)	boolean
Manage state of the control. An unmanaged control is not visible, nor does it take up any screen real estate. All controls are created managed by default.
numberOfPopupMenus(npm)	boolean
Return the number of popup menus attached to this control.
popupMenuArray(pma)	boolean
Return the names of all the popup menus attached to this control.
preventOverride(po)	boolean
If true, this flag disallows overriding the control's attribute via the control's right mouse button menu.
annotation(ann)	string
Annotate the control with an extra string value.
backgroundColor(bgc)	[float, float, float]
The background color of the control. The arguments correspond to the red, green, and blue color components. Each component ranges in value from 0.0 to 1.0. When setting backgroundColor, the background is automatically enabled, unless enableBackground is also specified with a false value.
enableBackground(ebg)	boolean
Enables the background color of the control.
docTag(dtg)	string
Add a documentation flag to the control. The documentation flag has a directory structure like hierarchy. Eg. -dt render/multiLister/createNode/material
dragCallback(dgc)	script
Adds a callback that is called when the middle mouse button is pressed. The MEL version of the callback is of the form: global proc string[] callbackName(string $dragControl, int $x, int $y, int $mods) The proc returns a string array that is transferred to the drop site. By convention the first string in the array describes the user settable message type. Controls that are application defined drag sources may ignore the callback. $mods allows testing for the key modifiers CTL and SHIFT. Possible values are 0 == No modifiers, 1 == SHIFT, 2 == CTL, 3 == CTL + SHIFT. In Python, it is similar, but there are two ways to specify the callback. The recommended way is to pass a Python function object as the argument. In that case, the Python callback should have the form: def callbackName( dragControl, x, y, modifiers ): The values of these arguments are the same as those for the MEL version above. The other way to specify the callback in Python is to specify a string to be executed. In that case, the string will have the values substituted into it via the standard Python format operator. The format values are passed in a dictionary with the keys "dragControl", "x", "y", "modifiers". The "dragControl" value is a string and the other values are integers (eg the callback string could be "print '%(dragControl)s %(x)d %(y)d %(modifiers)d'")
dropCallback(dpc)	script
Adds a callback that is called when a drag and drop operation is released above the drop site. The MEL version of the callback is of the form: global proc callbackName(string $dragControl, string $dropControl, string $msgs[], int $x, int $y, int $type) The proc receives a string array that is transferred from the drag source. The first string in the msgs array describes the user defined message type. Controls that are application defined drop sites may ignore the callback. $type can have values of 1 == Move, 2 == Copy, 3 == Link. In Python, it is similar, but there are two ways to specify the callback. The recommended way is to pass a Python function object as the argument. In that case, the Python callback should have the form: def pythonDropTest( dragControl, dropControl, messages, x, y, dragType ): The values of these arguments are the same as those for the MEL version above. The other way to specify the callback in Python is to specify a string to be executed. In that case, the string will have the values substituted into it via the standard Python format operator. The format values are passed in a dictionary with the keys "dragControl", "dropControl", "messages", "x", "y", "type". The "dragControl" value is a string and the other values are integers (eg the callback string could be "print '%(dragControl)s %(dropControl)s %(messages)r %(x)d %(y)d %(type)d'")
fullPathName(fpn)	string
Return the full path name of the widget, which includes all the parents
image1(i1)	string
image2(i2)	string
image3(i3)	string
This control supports three images. The image that best fits the current size of the control will be displayed. This flag applies the image to the current tool.
imageOverlayLabel(iol)	string
A short string (5 characters) label that will be displayed on top of the icon.
toolImage1(ti1)	[string, string]
toolImage2(ti2)	[string, string]
toolImage3(ti3)	[string, string]
This control supports three images. The image that best fits the current size of the control will be displayed. This flag applies the image to the specified tool. The first argument is the name of the tool and the second is the name of the image. When queried an array of tool icon pairs is returned.
style(st)	string
The draw style of the control. Valid styles are "iconOnly", "textOnly", "iconAndTextHorizontal" and "iconAndTextVertical".
onCommand(onc)	script
Command executed when the control is turned on.
offCommand(ofc)	script
Command executed when the control is turned off.
changeCommand(cc)	script
Command executed when the control's state is changed. Note that this flag should not be used in conjunction with onCommand and offCommand. That is, one should either use changeCommand and test the state of the control from inside the callback, or use onCommand and offCommand as separate callbacks.
collection(cl)	string
To explicitly add a tool button to a tool collection.
doubleClickCommand(dcc)	script
Command executed when the control is double clicked.
select(sl)	boolean
Will set this button as the selected one. This flag also queries the select state of the control.
tool(t)	string
The name of the tool to be attached to the button. If the tool specified is already attached to this button then it will be selected. Query this flag to return the current tool. This flag may be specified more than once to attach more than one tool.
allowMultipleTools(amt)	boolean
Indicates whether this control will allow you to attach more than one tool. By default, this control accepts only one tool. You can add multiple tools by setting this flag to true. Only one tool will be current and displayed at any one time. Use the pop up menu attached to the right mouse button to view all the tools.
toolCount(tc)	boolean
This query only flag return the number of tools attached to the toolButton control.
toolArray(ta)	boolean
This query only flag returns the names of all the tools attached to the toolButton control.
popupIndicatorVisible(piv)	boolean
Edit this flag to set the visibility of the popup tool indicator. The indicator is a simple image that appears in the top right corner of the button when more that one tool is associated with this control. This flag is queryable and true by default.

Flag can appear in Create mode of command	Flag can appear in Edit mode of command
Flag can appear in Query mode of command	Flag can have multiple arguments, passed either as a tuple or a list.

Python examples

import maya.cmds as cmds

cmds.window()
cmds.columnLayout()
cmds.toolCollection()
cmds.toolButton( tool='selectSuperContext', toolImage1=('selectSuperContext', 'aselect.xpm') )
cmds.toolButton( tool='moveSuperContext', toolImage1=('moveSuperContext', 'move_M.xpm') )
cmds.toolButton( tool='scaleSuperContext', toolImage1=('scaleSuperContext', 'scale_M.png') )
cmds.showWindow()

# example showing how to create tool buttons for artisan tools
#
# create the contexts
selectCtx = cmds.artSelectCtx()
puttyCtx = cmds.artPuttyCtx()
setPaintCtx = cmds.artSetPaintCtx()

cmds.window()
cmds.gridLayout()
cmds.toolCollection()
# create the tool buttons using the contexts returned
cmds.toolButton(
                amt=True, piv=True,
                doubleClickCommand='cmds.toolPropertyWindow()',
                tool=(selectCtx, puttyCtx, setPaintCtx),
                toolImage1=(selectCtx, 'artSelect.xpm'),
                toolImage2=(puttyCtx, 'putty.png'),
                toolImage3=(setPaintCtx, 'paintSetMembership.png') )
cmds.showWindow()