workspace

Go to: Synopsis. Return value. Related. Flags. MEL examples.

Synopsis

workspace [-active] [-baseWorkspace string] [-create string] [-directory string] [-expandName string] [-fileRule string string] [-fileRuleEntry string] [-fileRuleList] [-filter] [-fullName] [-list] [-listFullWorkspaces] [-listWorkspaces] [-newWorkspace] [-objectType string string] [-objectTypeEntry string] [-objectTypeList] [-openWorkspace] [-projectPath string] [-removeFileRuleEntry string] [-removeVariableEntry string] [-renderType string string] [-renderTypeEntry string] [-renderTypeList] [-rootDirectory] [-saveWorkspace] [-shortName] [-update] [-updateAll] [-variable string string] [-variableEntry string] [-variableList] [string]

workspace is undoable, queryable, and NOT editable.

Return value

In query mode, return type is based on queried flag.

Related

Flags

Long name (short name)	Argument types	Properties
-newWorkspace(-n)
This specifies that a new workspace is being created. If a workspace with this name already exists, the command will fail.
-openWorkspace(-o)
Open the workspace. The workspace becomes the current workspace.
-active(-act)
This flag is a synonym for -o/openWorkspace.
-saveWorkspace(-s)
Save the workspace. Workspaces are normally saved when Maya exits but this flag will make sure that the data is flushed to disk.
-baseWorkspace(-bw)	string
A workspace may be based on another workspace. This means that all the settings in the base workspace apply to this workspace unless they are explicitly overridden.
-listWorkspaces(-lw)
Returns a list of all the currently defined workspace names.
-listFullWorkspaces(-lfw)
Returns a list of the full path names of all the currently defined workspaces.
-list(-l)
This option will list the current workspace directory. If a path is specified for the "workspaceFile" then the contents of that directory will be listed. Otherwise, the contents of the directory set with the -dir flag will be listed.
-directory(-dir)	string
This option will set the current workspace directory to the path specified. When queried it will return the current workspace directory. This directory is used as an initial directory for the fileBrowser and is part of the search path used for locating files. It should not be confused with the current working directory as used by the pwd and chdir commands. When the file browser is used, it will set this value to the last location navigated to.
-create(-cr)	string
Create a new directory. If the directory name is not a full path name, it will be created as a subdirectory of the "current" directory set with the -dir flag.
-rootDirectory(-rd)
Returns the root directory of the workspace.
-objectType(-ot)	string string
This flag is obsolete. All default locations will be added to the fileRules going forward.
-objectTypeList(-otl)
This flag is obsolete. This will now return the same results as fileRuleList going forward.
-objectTypeEntry(-ote)	string
This flag is obsolete. This will now return the same as fileRuleEntry.
-fileRule(-fr)	string string
Set the default location for a file. The first parameter is the fileRule (scenes, images, etc) and the second is the location. When queried, it returns a list of strings. The elements of the returned list alternate between fileRule names and the corresponding location. There is typically one file rule for each available translator. Environment variables are supported. You can set multiple path for the file rule by separating them with semicolons (;) on Windows and colons(:) on MacOSX and Linux. Note that whitespace at the beginning and end of each item in the separated sequence is significant and will be included as part of the path name (which is not usually desired unless the pathname does actually start or end with spaces).
-fileRuleList(-frl)
Returns a list of the currently defined file rules.
-fileRuleEntry(-fre)	string
Return the location for the given fileRule.
-removeFileRuleEntry(-rfr)	string
Remove the given file rule from the specified workspace. If the workspace name is not specified, the given file rule will be removed from the current workspace.
-renderType(-rt)	string string
This flag is obsolete. All default render types will be added to fileRules going forward.
-renderTypeList(-rtl)
This flag is obsolete, use fileRuleList going forward.
-renderTypeEntry(-rte)	string
This flag is obsolete, use fileRuleEntry going forward
-variable(-v)	string string
Set or query the value of a project variable. Project variables are used when expanding names. See the -en/expandName flag below.
-variableList(-vl)
Return a list of all variables in the workspace.
-variableEntry(-ve)	string
Given a variable name, will return its value.
-removeVariableEntry(-rve)	string
Remove the given variable from the specified workspace. If the workspace name is not specified, the given variable will be removed from the current workspace.
-shortName(-sn)
Query the short name of the workspace.
-fullName(-fn)
Return the full name of the workspace.
-expandName(-en)	string
Query for the full path location of a filename using the current workspace definition. The path may be a project relative file name, a full path name or a variable name. The return value is always a full path name. If the path is an empty string, the return value will be the project root directory. Variable expansion is supported, and will consider both variables defined in the workspace as well as environment variables. There are three formats supported for expanding variable names: %variableName%, $variableName, ${variableName}. Maya will first attempt to find matching variables defined in the current workspace, then search for a matching environment variable. The tilde character ('~') is also supported. If a tilde is located at the beginning of a variable, Maya will only consider and expand environment variables, and will leave the tilde in the expanded result. On linux platforms only, a tilde can be used to expand a user's home directory, using the form ~username, ~, or ~/. When specified as ~username, it will be replaced with the corresponding user's home directory. When specified as ~ or ~/, it will be replaced with the value of the HOME environment variable.
-projectPath(-pp)	string
Convert filePath passed as argument to a filename that is relative to the project root directory (if possible) and return it. If the filePath is not under the project root directory, a full path name will be returned.
-update(-u)
This flag reads all the workspace definitions from the project directory. It is used by Maya at startup time to find the available workspaces.
-updateAll(-ua)
This flag is a synonym for -u/update.
-filter(-f)
This flag is obsolete.

Flag can appear in Create mode of command	Flag can appear in Edit mode of command
Flag can appear in Query mode of command	Flag can be used more than once in a command.

MEL examples

// Set the current workspace to "alphabet"
workspace -openWorkspace alphabet;

/ Save the current workspace settings (for "alphabet").
workspace -saveWorkspace;

// Create a new workspace named "newWorkspace".
workspace -newWorkspace newWorkspace;

// The settings of "newWorkspace" are based on "default" workspace
workspace -baseWorkspace default;

// Return the list of existing workspaces
workspace -listWorkspaces ;
// Result: default   newWorkspace

// Add a scriptJob to run on workspaceChanged events
global proc workspaceChangedCallback()
{
    print "My workspaceChangedCallback was called";
}

int $workspaceChangedID = `scriptJob -event workspaceChanged workspaceChangedCallback`;

// add a file rule to the current workspace
workspace -fileRule "newFileRuleName" "newFileRuleValue";
My workspaceChangedCallback was called            //workspaceChangedCallback was called

// look up the value of the file rule entry
workspace -q -fileRuleEntry "newFileRuleName";
// Result: newFileRuleValue

// remove specified file rule entry
workspace -removeFileRuleEntry "newFileRuleName";
My workspaceChangedCallback was called            //workspaceChangedCallback is called

// kill the scriptJob with the number
scriptJob -kill $workspaceChangedID;

// The following example shows how to expand environment and workspace variables

// expand a path value to be a full path relative to the project directory
// relative path example
workspace -expandName "relativePathName";
// Result: /h/userName/maya/projects/newWorkspace/relativePathName/
// full path example
workspace -expandName "/h/userName/maya/projects/default/";
// Result: /h/userName/maya/projects/default/

// The following examples show various formats for expanding workspace and
// environment variables

// add a variable to the current workspace
workspace -variable "newVariableName" "newVariableValue";

workspace -expandName "%newVariableName%";
// Result: /h/userName/maya/projects/newWorkspace/newVariableValue/

// add an environment variable
putenv "newEnvVariableName" "newEnvVariableValue";

workspace -expandName "%newEnvVariableName%";
// Result: /h/userName/maya/projects/newWorkspace/newEnvVariableValue/

// The following example shows how conflicting names in both workspace
// and environment variables are resolved.
// Add an environment variable with the same as the workspace variable
putenv "newVariableName" "newEnvVariableValue"

// maya considers workspace variables first before matching environment variables
workspace -expandName "%newVariableName%";
// Result: /h/userName/maya/projects/newWorkspace/newVariableValue/

// However when a tilde is used, maya will only consider the environment varible, not
// the workspace variable.
workspace -expandName "~%newVariableName%";
// Result: /h/userName/maya/projects/newWorkspace/~newEnvVariableValue/

// The following example shows how to set multiple paths into a fileRule value
workspace -fileRule 'newMultiPathFileRuleName' '/h/userName/maya/projects/default;newFileRuleValue';

string $multipath = `workspace -q -fileRuleEntry 'newMultiPathFileRuleName'`;
// Result : /h/userName/maya/projects/default;newFileRuleValue

// The following will only return the first expanded path.
workspace -expandName $multipath;
// Result : /h/userName/maya/projects/default

// Note that white space at the beginning and the end of each path is significant
// Add a file rule that uses multiple paths with the white space at the beginning and the end
// of each path
workspace -fileRule 'newMultiPathFileRuleName' ' /h/userName/maya/projects/default ; newFileRuleValue ';
// Querying and expanding the path value shows the white space is still included
string $multipath = `workspace -q -fileRuleEntry 'newMultiPathFileRuleName'`;
// Result :  /h/userName/maya/projects/default ; newFileRuleValue

// Find the current workspace area.
workspace -q -directory;
// Result : /h/userName/maya/projects/default

// Note that the "current working directory" as defined by the
// 'pwd' and 'chdir' commands is unrelated to the directories
// used by the workspace command.
//
pwd;
// Result : /usr/tmp

chdir "/tmp";
pwd;
// Result : /tmp
workspace -q -directory;
// Result : /h/userName/maya/projects/default

workspace -directory "/h/userName/maya/projects/commercial";
pwd;
// Result : /tmp