Autodesk
®
AutoCAD
® Map 3D 2015
Service Pack 3 Readme
Thank
you for downloading Autodesk® AutoCAD® Map
3D
2015 Service Pack 3.
This readme contains the latest information regarding the
installation and use of this service pack. It is strongly recommended
that you read this entire document before you apply this service pack
to your product. For
reference, you
should
save this document to your hard drive or print a copy. This service
pack also
contains the updates in Autodesk® AutoCAD®
2015 Service Pack 2 and all previous hotfixes and service packs for AutoCAD Map 3D 2015.
Autodesk® AutoCAD® 2015 Service Pack 2 Readme
WARNING:
Before uninstalling the service pack
please read the Uninstall
This Service Pack
section.
Contents
You
can apply this Service Pack to the following Autodesk®
products
running on all supported operating systems and languages. Be sure to
install
the correct Service Pack for your software.
NOTE:
You can also use Autodesk Exchange to install
the Live Update Maintenance Patches, which will automatically show the
correct
Service Pack for your product.
New For This Release:
The
new Autodesk Application Manager will automatically notify you that an
Update
is available before going to the Web to download the service pack.
|
32-bit
Product
|
Service
Pack
|
Autodesk®
AutoCAD® Map 3D 2015
Autodesk® Infrastructure
Administrator 2015 |
Map3D2015_win32_SP3.exe
InfrastructureAdministrator2015_win32_SP3.exe |
|
64-bit
Product
|
Service
Pack
|
Autodesk®
AutoCAD® Map 3D 2015
Autodesk® Infrastructure
Administrator 2015
|
Map3D2015_x64_SP3.exe
InfrastructureAdministrator2015_x64_SP3.exe |
Return
to
Top
When
you apply this Service Pack while running AutoCAD Map 3D, it is
recommended that you do not click the "Automatically close applications
and attempt to restart them after setup is complete" option. Instead,
close AutoCAD Map 3D manually, and press "Ignore" at the prompt. It is
also recommended that you reboot your system after installing the
Service Pack.
Return
to
Top
The following issues have been resolved in Autodesk AutoCAD
Map 3D 2015 Service Pack 1:
CAD Manager Tools
- CAD Manager Control Utility cannot be launched correctly.
MAPPROPSST
- MAPPROPSLT does not work on Windows 8.
Surface Manager
- On some Windows 8.1 machines, Surface Manager may cause Map
3D to stop
working when you click on the fields in Parameters column.
FDO WMS
- On a machine without Oracle client installed, Map 3D has
‘Fail to load WMSProvider.dll’ problem.
Return to
Top
The following issues have been resolved in Autodesk AutoCAD
Map 3D 2015 Service Pack 2:
MAPTOACAD
- Blocks
in DWT template should be considered during MAPTOACAD. This is an
enhancement for layers that use symbols that are part of the Library
repository in the layer file (option Load Symbols as a copy was toggled
OFF when loading the symbol, therefore the XML definition of the symbol
is saved as part of the Library repository in the layer file).
Industry Model
- Layer query gets replaced by the parameters of Advanced
Generate Graphic
options.
- Intersection
fails if there are not consecutive lines taking part in intersection.
- Filter
from Excel and Update from Excel do not work.
- Label
is not created automatically for the first new feature in Security Role.
- Map
3D fails to create display model with layer added in drawing.
Raster
- Raster
images have a grid superimposed on the image when DVIEWTWist after a CS
transform
between projected coordinate systems.
Generate Graphic
- Layers
are not refreshed based on the layer filters when user digitizes a
feature.
FDO WMS
- Map
3D fails to connect to the https WMS server.
FDO ArcGIS
- This release supports ArcGIS 10.2 version.
FDO ArcSDE
- Performance issue while connecting to Oracle based ArcSDE.
- Issue with Export to FDO when selecting attributes in
Object to Feature Class
mapping for ArcSDE.
Publish to Infrastructure Map Server
- The xml symbols in layer theme in Map 3D will be reset to
default if same
symbol is attached to different rules.
Others
- The layer API incorrectly reports the layer as selectable
after adding layers asynchronously.
- FDOUserManager.exe does not work.
- Querying object data in attached drawing via command line
does not work.
Return
to
Top
The following issues have been resolved in Autodesk AutoCAD
Map 3D 2015 Service Pack 3:
Bulk Copy
- Bulk Copy may not work properly when selecting the source as a layer of the current drawing.
Industry Model
- The auto created feature label will move to the originally defined location when editing the feature attribute in Map 3D.
- Lines and Points need minutes to highlight all from form.
- Updating from excel may fail if the key coloumn in the excel has '#' as prefix.
- Sometimes Map 3D pops up eLockViolation message when generating grahpic.
FDO WFS
- Map 3D cannot read the feature class information from the WFS server if it has too many feature classes, as the sending request would be too long.
- FDO WFS cannot support some multiple surface geometry.
Options
- Map 3D 2015 does not accept cyrillic characters in path.
Others
- User cannot duplicate the layout tab by using the CTRL key.
- In certain cases, Block Editor toolbar does not disappear from view when exiting the Block Editor.
- On Windows 8/8.1, AutoCAD Map 3D fails to work when user clicks Query Current Drawing.
Return to
Top
Note:
- Autodesk Sync (AdSync) patch will
automatically get installed with the AutoCAD and AutoCAD LT patch.
- In case you’re working with Industry Models, after Map 3D 2015 Sp2 installed (or sp3 applied to Map 3D versions prior to sp2), it is required to update Map System User via Industry Model Set Up which has Infrastructure Administrator 2015 SP2 (or SP3) applied.
As you prepare to install this service pack, keep the
following in mind:
Back Up Custom Files
It is recommended that you back up all custom CUIX, MNR,
and MNL files before you apply this service pack.
Administrative Privileges
During installation or uninstallation, you may be prompted
for the original installation media or a network image. In order to
apply this service pack, you must have privileges to install and
uninstall products.
Network Deployment
Administrators can deploy this service pack over a network
using the Deployment Wizard.
Reboot
After you install, it is recommended to reboot your system
even if not prompted.
About Your Product
After you install, updated product information displays in
the About
dialog box.
About
Windows Command Line Switches
The following Microsoft Windows command line switches are
built into this Service Pack:
/e – Extracts the MSP file from the Service Pack executable.
/q – Suppresses the completion message after the Service Pack
is applied. This is useful if you use a script or batch file to apply
this Service Pack to multiple computers.
Instructions about how to use the /e command line switch are
included in the installation procedures that follow.
Return to
Top
Apply
This Service Pack to a Stand-Alone Installation
Follow these instructions to install this service pack on a
single computer.
- Download the service pack and save it to any folder.
- Close all running Autodesk applications.
- If required, insert the product media (for example, the
Autodesk AutoCAD Map 3D installation disc) or make sure the
installation source files
are available.
- Find the folder where you saved the service pack and
double-click the executable (EXE) file.
Return to
Top
Apply This Service Pack Through a
Local Network
Follow these instructions to install this Service Pack on
multiple computers using your Local Network.
- Download the Service Pack and save it to any shared folder
on your Local Network.
- Find the shared folder where you saved the Service Pack,
and double-click the executable (EXE) file.
Note:
Installation through your local network using the CAD Manager Control
Utility is not supported for this service Pack.
Return to
Top
Apply
This Service Pack to a Network Administrative Image
The following distribution method applies only to
administrative images created with the Deployment Wizard. After you
complete these procedures, subsequent deployments of your product will
include this Service Pack.
In all cases, append this Service Pack to the deployment. The only time
it is appropriate to merge the Service Pack is if you intend to
distribute the deployment through a group policy object.
The patch (Service Pack) file that you download contains an
MSP (Microsoft Patch) file, which you extract from the executable file
using the /e (extract) switch. For an example of the syntax, see step
2, below.
- From the Autodesk Product Support website, download the
Service Pack EXE file to your local computer.
- On the Start menu (Windows), click Run. Enter the
following information and click OK.
<local_drive:>\<patch_name> /e <local_drive:>\<patch_name>.msp
- Insert the Autodesk media and launch setup.exe.
- Select Create Deployments. Click Next.
- On the Begin Deployment page, in the Specify the
Deployment Location box, enter the shared network location where you
would like to create an administrative image, or click Browse to find a
location. Users install the product from this location.
- In the Specify a Deployment Name box, enter the name for
your deployment.
- Continue through the Deployment wizard, open and configure
the deployment in the product configuration page, click Add to find the
Service Pack extracted in Step 2. Notice that the Service Pack has been
added in the Include Service Pack(s) from local drive or local network
box. Close and return to the product list.
- Follow the instructions in the Deployment wizard to
complete the Service Pack deployment.
Note:
When AutoCAD or LT service pack is included in deployment, the
deployment will only install the AutoCAD or LT product service pack
without update files for Autodesk Sync.
Return to
Top
Uninstall
This Service Pack
To uninstall the Autodesk AutoCAD Map 3D 2015 Service Pack 3,
use the Uninstall a program for Windows 7 or Windows 8/8.1. Expand your
window to see the updates and then select the service pack to remove it.
Note:
If you install the service pack by a DVD, you will need the DVD for
uninstalling the service pack because it needs to find the acadmap.msi
during the uninstallation.
Return to
Top
We thank all our customers who identified these issues and
reported them to us. These reports give us the opportunity to improve
the product and provide you with the best solution. We also thank you
for your continued business and for feedback regarding the content of
this update release.
Respectfully,
Autodesk Product Team
Return to
Top
Copyright © 2014 Autodesk, Inc.