Remote Content Center Libraries for Autodesk Inventor 2015

February 24 & July 9, 2014

Installation Instructions - Read Me file
Autodesk, Inc.

In a continuing effort to speed download and install times for our customers, Autodesk is releasing the Remote Content Center Libraries 2015 independently. These Inventor Remote Content Center Libraries 2015 included all the standard Inventor libraries as well as the complete set of Mold Design libraries.


Return to Top

Return to Top

Before installing the Remote Content Center Libraries for Autodesk Inventor 2015, ensure you have the following installed:

For Inventor 2015 Remote Content

For Inventor 2015 Desktop Content


Disk Requirements

This data indicates disk requirements for each Content Library. Totally, approximately 8.2 GB free disk space is required.

    Desktop Content Library Actual Disk Required
    ANSI 2,182 MB
    DIN 610 MB
    GOST 1,485 MB
    ISO 450 MB
    JIS & GB 1,054 MB
    Feature 53 MB
    Other 2,086 MB
    Parker 95 MB
    Routed Systems 53 MB
    Sheet Metal 89 MB
    Mold Metric 109 MB

Return to Top

  1. From the Autodesk web site, select and download the Remote Content Center Libraries for Inventor 2015 that you wish to have ongoing access to. Ensure you choose the libraries appropriate for the Vault Server release you will be installing on to.
  2. Save the downloaded executable(s) locally.
  3. Ensure Vault Server 2015 or 2015 R2 is installed, but not running.
  4. Extract each library by double clicking the .exe file. All libraries will be extracted into a default location, or you can specify a custom destination folder. To install all your libraries in a single operation, use the same extraction location.
  5. Browse to the extraction location to ensure all libraries were extracted successfully.
  6. If you are using the default username and password for the Vault and SQL servers, then within the extraction location, double click the setup.bat file. All libraries present will be installed into the Vault Server 2015 or 2015 R2 database. If you do not want to install a specific library, simply delete its zip file before running the setup.bat file.
    1. NOTE: If you are using non-default username and password for the Vault or SQL servers, you will need to modify the setup.bat file before double clicking to start the library installations. Using a text editor, modify the lines 6 to 11, starting with SET, appropriately. Do NOT make any changes below line 12 and ignore the remark lines starting with REM.

  7. Open the Autodesk Data Management Server Console and verify that all libraries were installed successfully...

Return to Top

Return to Top

Return to Top


Copyright © 2014 Autodesk, Inc.