pymel.core.uitypes.RowColumnLayout

Inheritance diagram of RowColumnLayout

class RowColumnLayout

class counterpart of mel function rowColumnLayout

This command creates a rowColumn layout. A rowColumn layout positions children in either a row or column format. A column layout, specified with the -nc/numberOfColumnsflag, allows you set text alignment, attachments and offsets for each column in the layout. Every member of a column will have the same alignment, attachment and offsets. Likewise the row format, specified by the -nr/numberOfRowsflag, allows setting of these attributes for each row in the layout. Every member of a row will have the same attributes. The layout must be either a row or column format. This layout does not support both, or the specification of attributes on an individual child basis. Some flags only make sense for one of either the row format or the column format. For example the -rh/rowHeightflag can only be specified in row format. In column format the row height is determined by the tallest child in the row, plus offsets.

columnAlign(val=True, **kwargs)

Alignment for text and pixmaps in the specified column. Values are: “left”, “right” and “center”. Only valid for column format, ie. number of columns specified with -nc/numberOfColumnsflag.

Derived from mel command maya.cmds.rowColumnLayout

columnAttach(val=True, **kwargs)

The attachements and offsets for the children in the specified column. The first argument is the 1-based column index. The second argument is the attachment, valid values are “left”, “right” and “both”. The third argument must be greater than 0 and specifies the offset.

Derived from mel command maya.cmds.rowColumnLayout

columnOffset(val=True, **kwargs)

The attachment offset for the specified column. The first argument is the 1-based column index. The second argument is the attachment, valid values are “left”, “right” and “both”. The third argument must be greater than 0 and specifies the offset.

Derived from mel command maya.cmds.rowColumnLayout

columnSpacing(val=True, **kwargs)

The space between columns in pixels. In column format this flag specifies that the space be to the left of the given column. In row format it specifies the space between all columns, however a valid column index is still required. The first argument is the 1-based column index. The second argument must be greater than 0 and specifies the spacing.

Derived from mel command maya.cmds.rowColumnLayout

columnWidth(val=True, **kwargs)

Width of a column. This flag is valid only in column format. The column width must be greater than 0. The first argument is the 1-based column index. The second argument must be greater than 0 and specifies the column width.

Derived from mel command maya.cmds.rowColumnLayout

dragCallback(val=True, **kwargs)

Adds a callback that is called when the middle mouse button is pressed. The MEL version of the callback is of the form: global proc string[] callbackName(string $dragControl, int $x, int $y, int $mods) The proc returns a string array that is transferred to the drop site. By convention the first string in the array describes the user settable message type. Controls that are application defined drag sources may ignore the callback. $mods allows testing for the key modifiers CTL and SHIFT. Possible values are 0 == No modifiers, 1 == SHIFT, 2 == CTL, 3 == CTL + SHIFT. In Python, it is similar, but there are two ways to specify the callback. The recommended way is to pass a Python function object as the argument. In that case, the Python callback should have the form: def callbackName( dragControl, x, y, modifiers ): The values of these arguments are the same as those for the MEL version above. The other way to specify the callback in Python is to specify a string to be executed. In that case, the string will have the values substituted into it via the standard Python format operator. The format values are passed in a dictionary with the keys “dragControl”, “x”, “y”, “modifiers”. The “dragControl” value is a string and the other values are integers (eg the callback string could be “print ‘%(dragControl)s %(x)d %(y)d %(modifiers)d’”)

Derived from mel command maya.cmds.rowColumnLayout

dropCallback(val=True, **kwargs)

Adds a callback that is called when a drag and drop operation is released above the drop site. The MEL version of the callback is of the form: global proc callbackName(string $dragControl, string $dropControl, string $msgs[], int $x, int $y, int $type) The proc receives a string array that is transferred from the drag source. The first string in the msgs array describes the user defined message type. Controls that are application defined drop sites may ignore the callback. $type can have values of 1 == Move, 2 == Copy, 3 == Link. In Python, it is similar, but there are two ways to specify the callback. The recommended way is to pass a Python function object as the argument. In that case, the Python callback should have the form: def pythonDropTest( dragControl, dropControl, messages, x, y, dragType ): The values of these arguments are the same as those for the MEL version above. The other way to specify the callback in Python is to specify a string to be executed. In that case, the string will have the values substituted into it via the standard Python format operator. The format values are passed in a dictionary with the keys “dragControl”, “dropControl”, “messages”, “x”, “y”, “type”. The “dragControl” value is a string and the other values are integers (eg the callback string could be “print ‘%(dragControl)s %(dropControl)s %(messages)r %(x)d %(y)d %(type)d’”)

Derived from mel command maya.cmds.rowColumnLayout

getAnnotation(**kwargs)

Annotate the control with an extra string value.

Derived from mel command maya.cmds.rowColumnLayout

getBackgroundColor(**kwargs)

The background color of the control. The arguments correspond to the red, green, and blue color components. Each component ranges in value from 0.0 to 1.0.When setting backgroundColor, the background is automatically enabled, unless enableBackground is also specified with a false value.

Derived from mel command maya.cmds.rowColumnLayout

getChildArray(**kwargs)

Returns a string array of the names of the layout’s immediate children.

Derived from mel command maya.cmds.rowColumnLayout

getDocTag(**kwargs)

Add a documentation flag to the control. The documentation flag has a directory structure like hierarchy. Eg. -dt render/multiLister/createNode/material

Derived from mel command maya.cmds.rowColumnLayout

getEnable(**kwargs)

The enable state of the control. By default, this flag is set to true and the control is enabled. Specify false and the control will appear dimmed or greyed-out indicating it is disabled.

Derived from mel command maya.cmds.rowColumnLayout

getEnableBackground(**kwargs)

Enables the background color of the control.

Derived from mel command maya.cmds.rowColumnLayout

getFullPathName(**kwargs)

Return the full path name of the widget, which includes all the parents

Derived from mel command maya.cmds.rowColumnLayout

getHeight(**kwargs)

The height of the control. The control will attempt to be this size if it is not overruled by parent layout conditions.

Derived from mel command maya.cmds.rowColumnLayout

getIsObscured(**kwargs)

Return whether the control can actually be seen by the user. The control will be obscured if its state is invisible, if it is blocked (entirely or partially) by some other control, if it or a parent layout is unmanaged, or if the control’s window is invisible or iconified.

Derived from mel command maya.cmds.rowColumnLayout

getManage(**kwargs)

Manage state of the control. An unmanaged control is not visible, nor does it take up any screen real estate. All controls are created managed by default.

Derived from mel command maya.cmds.rowColumnLayout

getNumberOfChildren(**kwargs)

Returns in an int the number of immediate children of the layout.

Derived from mel command maya.cmds.rowColumnLayout

getNumberOfColumns(**kwargs)

Number of columns. This flag is mutually exclusive to the -nr/numRowsflag. Either one or the other can be specified.

Derived from mel command maya.cmds.rowColumnLayout

getNumberOfPopupMenus(**kwargs)

Return the number of popup menus attached to this control.

Derived from mel command maya.cmds.rowColumnLayout

getNumberOfRows(**kwargs)

Number of rows. This flag is mutually exclusive to the -nc/numColumnsflag. Either one or the other can be specified.

Derived from mel command maya.cmds.rowColumnLayout

getPopupMenuArray(**kwargs)

Return the names of all the popup menus attached to this control.

Derived from mel command maya.cmds.rowColumnLayout

getPreventOverride(**kwargs)

If true, this flag disallows overriding the control’s attribute via the control’s right mouse button menu.

Derived from mel command maya.cmds.rowColumnLayout

getVisible(**kwargs)

The visible state of the control. A control is created visible by default. Note that a control’s actual appearance is also dependent on the visible state of its parent layout(s).

Derived from mel command maya.cmds.rowColumnLayout

getVisibleChangeCommand(**kwargs)

Command that gets executed when visible state of the control changes.

Derived from mel command maya.cmds.rowColumnLayout

getWidth(**kwargs)

The width of the control. The control will attempt to be this size if it is not overruled by parent layout conditions.

Derived from mel command maya.cmds.rowColumnLayout

rowAlign(val=True, **kwargs)

Alignment for text and pixmaps in the specified row. Values are: “left”, “right” and “center”. Only valid for row format, ie. number of rows specified with -nr/numberOfRowsflag.

Derived from mel command maya.cmds.rowColumnLayout

rowAttach(val=True, **kwargs)

The attachements and offsets for the children in the specified row. The first argument is the 1-based row index. The second argument is the attachment, valid values are “top”, “bottom” and “both”. The third argument must be greater than 0 and specifies the offset.

Derived from mel command maya.cmds.rowColumnLayout

rowHeight(val=True, **kwargs)

Height of a row. This flag is only valid in row format. The row height must be greater than 0. The first argument is the 1-based row index. The second argument must be greater than 0 and specifies the row height.

Derived from mel command maya.cmds.rowColumnLayout

rowOffset(val=True, **kwargs)

The attachment offset for the specified row. The first argument is the 1-based row index. The second argument is the attachment, valid values are “top”, “bottom” and “both”. The third argument must be greater than 0 and specifies the offset.

Derived from mel command maya.cmds.rowColumnLayout

rowSpacing(val=True, **kwargs)

The space between rows, in pixels. In row format this specifies the space above the specified row. In column format it specifies the space between all rows, however a valid row index is still required. The first argument is the 1-based row index. The second argument must be greater than 0 and specifies the spacing.Flag can appear in Create mode of commandFlag can have multiple arguments, passed either as a tuple or a list.

Derived from mel command maya.cmds.rowColumnLayout

setAnnotation(val=True, **kwargs)

Annotate the control with an extra string value.

Derived from mel command maya.cmds.rowColumnLayout

setBackgroundColor(val=True, **kwargs)

The background color of the control. The arguments correspond to the red, green, and blue color components. Each component ranges in value from 0.0 to 1.0.When setting backgroundColor, the background is automatically enabled, unless enableBackground is also specified with a false value.

Derived from mel command maya.cmds.rowColumnLayout

setDocTag(val=True, **kwargs)

Add a documentation flag to the control. The documentation flag has a directory structure like hierarchy. Eg. -dt render/multiLister/createNode/material

Derived from mel command maya.cmds.rowColumnLayout

setEnable(val=True, **kwargs)

The enable state of the control. By default, this flag is set to true and the control is enabled. Specify false and the control will appear dimmed or greyed-out indicating it is disabled.

Derived from mel command maya.cmds.rowColumnLayout

setEnableBackground(val=True, **kwargs)

Enables the background color of the control.

Derived from mel command maya.cmds.rowColumnLayout

setHeight(val=True, **kwargs)

The height of the control. The control will attempt to be this size if it is not overruled by parent layout conditions.

Derived from mel command maya.cmds.rowColumnLayout

setManage(val=True, **kwargs)

Manage state of the control. An unmanaged control is not visible, nor does it take up any screen real estate. All controls are created managed by default.

Derived from mel command maya.cmds.rowColumnLayout

setPreventOverride(val=True, **kwargs)

If true, this flag disallows overriding the control’s attribute via the control’s right mouse button menu.

Derived from mel command maya.cmds.rowColumnLayout

setVisible(val=True, **kwargs)

The visible state of the control. A control is created visible by default. Note that a control’s actual appearance is also dependent on the visible state of its parent layout(s).

Derived from mel command maya.cmds.rowColumnLayout

setVisibleChangeCommand(val=True, **kwargs)

Command that gets executed when visible state of the control changes.

Derived from mel command maya.cmds.rowColumnLayout

setWidth(val=True, **kwargs)

The width of the control. The control will attempt to be this size if it is not overruled by parent layout conditions.

Derived from mel command maya.cmds.rowColumnLayout

Previous topic

pymel.core.uitypes.RenderWindowEditor

Next topic

pymel.core.uitypes.RowLayout

Core

Core Modules

Other Modules

This Page