pymel.core.uitypes.IntSliderGrp

class IntSliderGrp

class counterpart of mel function intSliderGrp

All of the group commands position their individual controls in columns starting at column 1. The layout of each control (ie. column) can be customized using the -cw/columnWidth, -co/columnOffset, -cat/columnAttach, -cal/columnAlign, and -adj/adjustableColumnflags. By default, columns are left aligned with no offset and are 100 pixels wide. Only one column in any group can be adjustable. This command creates a pre-packaged collection of controls containing a label text, an integer field and an integer slider. The text and field controls are optional. Editing or querying the field range values has no effect if the -f/fieldflag was not specified when the group was created. This group also allows you to enter values into the field outside of the slider range which is limited by the -min/minValueand -max/maxValueflags. To do this, use the -fmn/fieldMinValueand -fmx/fieldMaxValueflags to specify a greater range of values. Note that the command will not allow you to specify a -fmn/fieldMinValuegreater than the -min/minValuevalue nor a -fmx/fieldMaxValueless than the -max/maxValuevalue. If you do supply a larger field range with the -fmn/fieldMinValueand -fmx/fieldMaxValueflags then you will notice that entering a value in the field that is outside of the slider range will result in extending the slider range as well. For example, if you create a slider group with the following command: intSliderGrp -min -10 -max 10 -fieldMinValue -100 -fieldMaxValue 100; Then you will be able to use the slider to select any value from -10 to 10. At the same time you will be able to enter into the field any value from -100 to 100. If you enter a value, say 20, then the new slider range will grow such that this value is now accessible through the slider as well. In fact, the new slider limit will become double of that what you entered. Note that the slider limits will never grow beyond the field limits, in other words if you entered the value 80 then the slider will be clipped to the field limit of 100 and not doubled to 160. TelfBaseGrpCmd.cpp

adjustableColumn(val=True, **kwargs)

Specifies which column has an adjustable size that changes with the sizing of the layout. The column value is a 1-based index. You may also specify 0 to turn off the previous adjustable column.

Derived from mel command maya.cmds.intSliderGrp

adjustableColumn2(val=True, **kwargs)

Specifies which column has an adjustable size that changes with the size of the parent layout. Ignored if there is not exactly two columns.

Derived from mel command maya.cmds.intSliderGrp

adjustableColumn3(val=True, **kwargs)

Specifies that the column has an adjustable size that changes with the size of the parent layout. Ignored if there is not exactly three columns.

Derived from mel command maya.cmds.intSliderGrp

adjustableColumn4(val=True, **kwargs)

Specifies which column has an adjustable size that changes with the size of the parent layout. Ignored if there is not exactly four columns.

Derived from mel command maya.cmds.intSliderGrp

adjustableColumn5(val=True, **kwargs)

Specifies which column has an adjustable size that changes with the size of the parent layout. Ignored if there is not exactly five columns.

Derived from mel command maya.cmds.intSliderGrp

adjustableColumn6(val=True, **kwargs)

Specifies which column has an adjustable size that changes with the size of the parent layout. Ignored if there is not exactly six columns.

Derived from mel command maya.cmds.intSliderGrp

changeCommand(val=True, **kwargs)

The command string executed when the value of the slider changes. It will be executed only once after a drag of the slider.

Derived from mel command maya.cmds.intSliderGrp

columnAlign(val=True, **kwargs)

Arguments are : column number, alignment type. Possible alignments are: left | right | center. Specifies alignment type for the specified column.

Derived from mel command maya.cmds.intSliderGrp

columnAlign2(val=True, **kwargs)

Sets the text alignment of both columns. Ignored if there is not exactly two columns. Valid values are “left”, “right”, and “center”.

Derived from mel command maya.cmds.intSliderGrp

columnAlign3(val=True, **kwargs)

Sets the text alignment for all 3 columns. Ignored if there is not exactly 3 columns. Valid values are “left”, “right”, and “center”.

Derived from mel command maya.cmds.intSliderGrp

columnAlign4(val=True, **kwargs)

Sets the text alignment for all 4 columns. Ignored if there is not exactly 4 columns. Valid values are “left”, “right”, and “center”.

Derived from mel command maya.cmds.intSliderGrp

columnAlign5(val=True, **kwargs)

Sets the text alignment for all 5 columns. Ignored if there is not exactly 5 columns. Valid values are “left”, “right”, and “center”.

Derived from mel command maya.cmds.intSliderGrp

columnAlign6(val=True, **kwargs)

Sets the text alignment for all 6 columns. Ignored if there is not exactly 6 columns. Valid values are “left”, “right”, and “center”.

Derived from mel command maya.cmds.intSliderGrp

columnAttach(val=True, **kwargs)

Arguments are : column number, attachment type, and offset. Possible attachments are: left | right | both. Specifies column attachment types and offets.

Derived from mel command maya.cmds.intSliderGrp

columnAttach2(val=True, **kwargs)

Sets the attachment type of both columns. Ignored if there is not exactly two columns. Valid values are “left”, “right”, and “both”.

Derived from mel command maya.cmds.intSliderGrp

columnAttach3(val=True, **kwargs)

Sets the attachment type for all 3 columns. Ignored if there is not exactly 3 columns. Valid values are “left”, “right”, and “both”.

Derived from mel command maya.cmds.intSliderGrp

columnAttach4(val=True, **kwargs)

Sets the attachment type for all 4 columns. Ignored if there is not exactly 4 columns. Valid values are “left”, “right”, and “both”.

Derived from mel command maya.cmds.intSliderGrp

columnAttach5(val=True, **kwargs)

Sets the attachment type for all 5 columns. Ignored if there is not exactly 5 columns. Valid values are “left”, “right”, and “both”.

Derived from mel command maya.cmds.intSliderGrp

columnAttach6(val=True, **kwargs)

Sets the attachment type for all 6 columns. Ignored if there is not exactly 6 columns. Valid values are “left”, “right”, and “both”.

Derived from mel command maya.cmds.intSliderGrp

columnOffset2(val=True, **kwargs)

This flag is used in conjunction with the -columnAttach2 flag. If that flag is not used then this flag will be ignored. It sets the offset for the two columns. The offsets applied are based on the attachments specified with the -columnAttach2 flag. Ignored if there is not exactly two columns.

Derived from mel command maya.cmds.intSliderGrp

columnOffset3(val=True, **kwargs)

This flag is used in conjunction with the -columnAttach3 flag. If that flag is not used then this flag will be ignored. It sets the offset for the three columns. The offsets applied are based on the attachments specified with the -columnAttach3 flag. Ignored if there is not exactly three columns.

Derived from mel command maya.cmds.intSliderGrp

columnOffset4(val=True, **kwargs)

This flag is used in conjunction with the -columnAttach4 flag. If that flag is not used then this flag will be ignored. It sets the offset for the four columns. The offsets applied are based on the attachments specified with the -columnAttach4 flag. Ignored if there is not exactly four columns.

Derived from mel command maya.cmds.intSliderGrp

columnOffset5(val=True, **kwargs)

This flag is used in conjunction with the -columnAttach5 flag. If that flag is not used then this flag will be ignored. It sets the offset for the five columns. The offsets applied are based on the attachments specified with the -columnAttach5 flag. Ignored if there is not exactly five columns.

Derived from mel command maya.cmds.intSliderGrp

columnOffset6(val=True, **kwargs)

This flag is used in conjunction with the -columnAttach6 flag. If that flag is not used then this flag will be ignored. It sets the offset for the six columns. The offsets applied are based on the attachments specified with the -columnAttach6 flag. Ignored if there is not exactly six columns.

Derived from mel command maya.cmds.intSliderGrp

columnWidth(val=True, **kwargs)

Arguments are : column number, column width. Sets the width of the specified column where the first parameter specifies the column (1 based index) and the second parameter specifies the width.

Derived from mel command maya.cmds.intSliderGrp

columnWidth1(val=True, **kwargs)

Sets the width of the first column. Ignored if there is not exactly one column.

Derived from mel command maya.cmds.intSliderGrp

columnWidth2(val=True, **kwargs)

Sets the column widths of both columns. Ignored if there is not exactly two columns.

Derived from mel command maya.cmds.intSliderGrp

columnWidth3(val=True, **kwargs)

Sets the column widths for all 3 columns. Ignored if there is not exactly 3 columns.

Derived from mel command maya.cmds.intSliderGrp

columnWidth4(val=True, **kwargs)

Sets the column widths for all 4 columns. Ignored if there is not exactly 4 columns.

Derived from mel command maya.cmds.intSliderGrp

columnWidth5(val=True, **kwargs)

Sets the column widths for all 5 columns. Ignored if there is not exactly 5 columns.

Derived from mel command maya.cmds.intSliderGrp

columnWidth6(val=True, **kwargs)

Sets the column widths for all 6 columns. Ignored if there is not exactly 6 columns.

Derived from mel command maya.cmds.intSliderGrp

dragCallback(val=True, **kwargs)

Adds a callback that is called when the middle mouse button is pressed. The MEL version of the callback is of the form: global proc string[] callbackName(string $dragControl, int $x, int $y, int $mods) The proc returns a string array that is transferred to the drop site. By convention the first string in the array describes the user settable message type. Controls that are application defined drag sources may ignore the callback. $mods allows testing for the key modifiers CTL and SHIFT. Possible values are 0 == No modifiers, 1 == SHIFT, 2 == CTL, 3 == CTL + SHIFT. In Python, it is similar, but there are two ways to specify the callback. The recommended way is to pass a Python function object as the argument. In that case, the Python callback should have the form: def callbackName( dragControl, x, y, modifiers ): The values of these arguments are the same as those for the MEL version above. The other way to specify the callback in Python is to specify a string to be executed. In that case, the string will have the values substituted into it via the standard Python format operator. The format values are passed in a dictionary with the keys “dragControl”, “x”, “y”, “modifiers”. The “dragControl” value is a string and the other values are integers (eg the callback string could be “print ‘%(dragControl)s %(x)d %(y)d %(modifiers)d’”)

Derived from mel command maya.cmds.intSliderGrp

dragCommand(val=True, **kwargs)

The command string executed repeatedly during a drag of the slider.

Derived from mel command maya.cmds.intSliderGrp

dropCallback(val=True, **kwargs)

Adds a callback that is called when a drag and drop operation is released above the drop site. The MEL version of the callback is of the form: global proc callbackName(string $dragControl, string $dropControl, string $msgs[], int $x, int $y, int $type) The proc receives a string array that is transferred from the drag source. The first string in the msgs array describes the user defined message type. Controls that are application defined drop sites may ignore the callback. $type can have values of 1 == Move, 2 == Copy, 3 == Link. In Python, it is similar, but there are two ways to specify the callback. The recommended way is to pass a Python function object as the argument. In that case, the Python callback should have the form: def pythonDropTest( dragControl, dropControl, messages, x, y, dragType ): The values of these arguments are the same as those for the MEL version above. The other way to specify the callback in Python is to specify a string to be executed. In that case, the string will have the values substituted into it via the standard Python format operator. The format values are passed in a dictionary with the keys “dragControl”, “dropControl”, “messages”, “x”, “y”, “type”. The “dragControl” value is a string and the other values are integers (eg the callback string could be “print ‘%(dragControl)s %(dropControl)s %(messages)r %(x)d %(y)d %(type)d’”)

Derived from mel command maya.cmds.intSliderGrp

getAnnotation(**kwargs)

Annotate the control with an extra string value.

Derived from mel command maya.cmds.intSliderGrp

getBackgroundColor(**kwargs)

The background color of the control. The arguments correspond to the red, green, and blue color components. Each component ranges in value from 0.0 to 1.0.When setting backgroundColor, the background is automatically enabled, unless enableBackground is also specified with a false value.

Derived from mel command maya.cmds.intSliderGrp

getDocTag(**kwargs)

Add a documentation flag to the control. The documentation flag has a directory structure like hierarchy. Eg. -dt render/multiLister/createNode/material

Derived from mel command maya.cmds.intSliderGrp

getEnable(**kwargs)

The enable state of the control. By default, this flag is set to true and the control is enabled. Specify false and the control will appear dimmed or greyed-out indicating it is disabled.

Derived from mel command maya.cmds.intSliderGrp

getEnableBackground(**kwargs)

Enables the background color of the control.

Derived from mel command maya.cmds.intSliderGrp

getExtraLabel(**kwargs)

If present on creation this specifies that there will be an extra label appearing after the slider. Sets the string to be the text for the extra label.

Derived from mel command maya.cmds.intSliderGrp

getFieldMaxValue(**kwargs)

Maximum value that may be entered in the field. This value may be set to any value greater than the -max/maxValueflag. By default, it is equal to the -max/maxValueflag.

Derived from mel command maya.cmds.intSliderGrp

getFieldMinValue(**kwargs)

Minimum value that may be entered in the field. This value may be set to any value less than the -min/minValueflag. By default, it is equal to the -min/minValueflag.

Derived from mel command maya.cmds.intSliderGrp

getFieldStep(**kwargs)

Increment for the field.

Derived from mel command maya.cmds.intSliderGrp

getFullPathName(**kwargs)

Return the full path name of the widget, which includes all the parents

Derived from mel command maya.cmds.intSliderGrp

getHeight(**kwargs)

The height of the control. The control will attempt to be this size if it is not overruled by parent layout conditions.

Derived from mel command maya.cmds.intSliderGrp

getIsObscured(**kwargs)

Return whether the control can actually be seen by the user. The control will be obscured if its state is invisible, if it is blocked (entirely or partially) by some other control, if it or a parent layout is unmanaged, or if the control’s window is invisible or iconified.

Derived from mel command maya.cmds.intSliderGrp

getLabel(**kwargs)

If present on creation the group will have static text. Returns a string on query.

Derived from mel command maya.cmds.intSliderGrp

getManage(**kwargs)

Manage state of the control. An unmanaged control is not visible, nor does it take up any screen real estate. All controls are created managed by default.

Derived from mel command maya.cmds.intSliderGrp

getMaxValue(**kwargs)

Sets the maximum value for both the slider and the field.

Derived from mel command maya.cmds.intSliderGrp

getMinValue(**kwargs)

Sets the minimum value for both the slider and the field.

Derived from mel command maya.cmds.intSliderGrp

getNumberOfPopupMenus(**kwargs)

Return the number of popup menus attached to this control.

Derived from mel command maya.cmds.intSliderGrp

getPopupMenuArray(**kwargs)

Return the names of all the popup menus attached to this control.

Derived from mel command maya.cmds.intSliderGrp

getPreventOverride(**kwargs)

If true, this flag disallows overriding the control’s attribute via the control’s right mouse button menu.

Derived from mel command maya.cmds.intSliderGrp

getSliderStep(**kwargs)

On Linux the slider step value represents the amount the value will increase or decrease when you click either side of the slider.

Derived from mel command maya.cmds.intSliderGrp

getStep(**kwargs)

Increment for both the slider and field.

Derived from mel command maya.cmds.intSliderGrp

getValue(**kwargs)

Value of the group.Flag can appear in Create mode of commandFlag can have multiple arguments, passed either as a tuple or a list.

Derived from mel command maya.cmds.intSliderGrp

getVisible(**kwargs)

The visible state of the control. A control is created visible by default. Note that a control’s actual appearance is also dependent on the visible state of its parent layout(s).

Derived from mel command maya.cmds.intSliderGrp

getVisibleChangeCommand(**kwargs)

Command that gets executed when visible state of the control changes.

Derived from mel command maya.cmds.intSliderGrp

getWidth(**kwargs)

The width of the control. The control will attempt to be this size if it is not overruled by parent layout conditions.

Derived from mel command maya.cmds.intSliderGrp

rowAttach(val=True, **kwargs)

Arguments are : column, attachment type, offset. Possible attachments are: top | bottom | both. Specifies attachment types and offsets for the entire row.

Derived from mel command maya.cmds.intSliderGrp

setAnnotation(val=True, **kwargs)

Annotate the control with an extra string value.

Derived from mel command maya.cmds.intSliderGrp

setBackgroundColor(val=True, **kwargs)

The background color of the control. The arguments correspond to the red, green, and blue color components. Each component ranges in value from 0.0 to 1.0.When setting backgroundColor, the background is automatically enabled, unless enableBackground is also specified with a false value.

Derived from mel command maya.cmds.intSliderGrp

setDocTag(val=True, **kwargs)

Add a documentation flag to the control. The documentation flag has a directory structure like hierarchy. Eg. -dt render/multiLister/createNode/material

Derived from mel command maya.cmds.intSliderGrp

setEnable(val=True, **kwargs)

The enable state of the control. By default, this flag is set to true and the control is enabled. Specify false and the control will appear dimmed or greyed-out indicating it is disabled.

Derived from mel command maya.cmds.intSliderGrp

setEnableBackground(val=True, **kwargs)

Enables the background color of the control.

Derived from mel command maya.cmds.intSliderGrp

setExtraLabel(val=True, **kwargs)

If present on creation this specifies that there will be an extra label appearing after the slider. Sets the string to be the text for the extra label.

Derived from mel command maya.cmds.intSliderGrp

setFieldMaxValue(val=True, **kwargs)

Maximum value that may be entered in the field. This value may be set to any value greater than the -max/maxValueflag. By default, it is equal to the -max/maxValueflag.

Derived from mel command maya.cmds.intSliderGrp

setFieldMinValue(val=True, **kwargs)

Minimum value that may be entered in the field. This value may be set to any value less than the -min/minValueflag. By default, it is equal to the -min/minValueflag.

Derived from mel command maya.cmds.intSliderGrp

setFieldStep(val=True, **kwargs)

Increment for the field.

Derived from mel command maya.cmds.intSliderGrp

setHeight(val=True, **kwargs)

The height of the control. The control will attempt to be this size if it is not overruled by parent layout conditions.

Derived from mel command maya.cmds.intSliderGrp

setLabel(val=True, **kwargs)

If present on creation the group will have static text. Returns a string on query.

Derived from mel command maya.cmds.intSliderGrp

setManage(val=True, **kwargs)

Manage state of the control. An unmanaged control is not visible, nor does it take up any screen real estate. All controls are created managed by default.

Derived from mel command maya.cmds.intSliderGrp

setMaxValue(val=True, **kwargs)

Sets the maximum value for both the slider and the field.

Derived from mel command maya.cmds.intSliderGrp

setMinValue(val=True, **kwargs)

Sets the minimum value for both the slider and the field.

Derived from mel command maya.cmds.intSliderGrp

setPreventOverride(val=True, **kwargs)

If true, this flag disallows overriding the control’s attribute via the control’s right mouse button menu.

Derived from mel command maya.cmds.intSliderGrp

setSliderStep(val=True, **kwargs)

On Linux the slider step value represents the amount the value will increase or decrease when you click either side of the slider.

Derived from mel command maya.cmds.intSliderGrp

setStep(val=True, **kwargs)

Increment for both the slider and field.

Derived from mel command maya.cmds.intSliderGrp

setValue(val=True, **kwargs)

Value of the group.Flag can appear in Create mode of commandFlag can have multiple arguments, passed either as a tuple or a list.

Derived from mel command maya.cmds.intSliderGrp

setVisible(val=True, **kwargs)

The visible state of the control. A control is created visible by default. Note that a control’s actual appearance is also dependent on the visible state of its parent layout(s).

Derived from mel command maya.cmds.intSliderGrp

setVisibleChangeCommand(val=True, **kwargs)

Command that gets executed when visible state of the control changes.

Derived from mel command maya.cmds.intSliderGrp

setWidth(val=True, **kwargs)

The width of the control. The control will attempt to be this size if it is not overruled by parent layout conditions.

Derived from mel command maya.cmds.intSliderGrp