pymel.core.uitypes.AttrColorSliderGrp

Inheritance diagram of AttrColorSliderGrp

class AttrColorSliderGrp

class counterpart of mel function attrColorSliderGrp

All of the group commands position their individual controls in columns starting at column 1. The layout of each control (ie. column) can be customized using the -cw/columnWidth, -co/columnOffset, -cat/columnAttach, -cal/columnAlign, and -adj/adjustableColumnflags. By default, columns are left aligned with no offset and are 100 pixels wide. Only one column in any group can be adjustable. Create a color slider group consisting of a label, a color canvas, a slider and a button. Clicking on the canvas will bring up the color editor. If the button is visible, it will allow you to map a texture to the attribute.

adjustableColumn(val=True, **kwargs)

Specifies which column has an adjustable size that changes with the sizing of the layout. The column value is a 1-based index. You may also specify 0 to turn off the previous adjustable column.

Derived from mel command maya.cmds.attrColorSliderGrp

adjustableColumn2(val=True, **kwargs)

Specifies which column has an adjustable size that changes with the size of the parent layout. Ignored if there is not exactly two columns.

Derived from mel command maya.cmds.attrColorSliderGrp

adjustableColumn3(val=True, **kwargs)

Specifies that the column has an adjustable size that changes with the size of the parent layout. Ignored if there is not exactly three columns.

Derived from mel command maya.cmds.attrColorSliderGrp

adjustableColumn4(val=True, **kwargs)

Specifies which column has an adjustable size that changes with the size of the parent layout. Ignored if there is not exactly four columns.

Derived from mel command maya.cmds.attrColorSliderGrp

adjustableColumn5(val=True, **kwargs)

Specifies which column has an adjustable size that changes with the size of the parent layout. Ignored if there is not exactly five columns.

Derived from mel command maya.cmds.attrColorSliderGrp

adjustableColumn6(val=True, **kwargs)

Specifies which column has an adjustable size that changes with the size of the parent layout. Ignored if there is not exactly six columns.

Derived from mel command maya.cmds.attrColorSliderGrp

columnAlign(val=True, **kwargs)

Arguments are : column number, alignment type. Possible alignments are: left | right | center. Specifies alignment type for the specified column.

Derived from mel command maya.cmds.attrColorSliderGrp

columnAlign2(val=True, **kwargs)

Sets the text alignment of both columns. Ignored if there is not exactly two columns. Valid values are “left”, “right”, and “center”.

Derived from mel command maya.cmds.attrColorSliderGrp

columnAlign3(val=True, **kwargs)

Sets the text alignment for all 3 columns. Ignored if there is not exactly 3 columns. Valid values are “left”, “right”, and “center”.

Derived from mel command maya.cmds.attrColorSliderGrp

columnAlign4(val=True, **kwargs)

Sets the text alignment for all 4 columns. Ignored if there is not exactly 4 columns. Valid values are “left”, “right”, and “center”.

Derived from mel command maya.cmds.attrColorSliderGrp

columnAlign5(val=True, **kwargs)

Sets the text alignment for all 5 columns. Ignored if there is not exactly 5 columns. Valid values are “left”, “right”, and “center”.

Derived from mel command maya.cmds.attrColorSliderGrp

columnAlign6(val=True, **kwargs)

Sets the text alignment for all 6 columns. Ignored if there is not exactly 6 columns. Valid values are “left”, “right”, and “center”.

Derived from mel command maya.cmds.attrColorSliderGrp

columnAttach(val=True, **kwargs)

Arguments are : column number, attachment type, and offset. Possible attachments are: left | right | both. Specifies column attachment types and offets.

Derived from mel command maya.cmds.attrColorSliderGrp

columnAttach2(val=True, **kwargs)

Sets the attachment type of both columns. Ignored if there is not exactly two columns. Valid values are “left”, “right”, and “both”.

Derived from mel command maya.cmds.attrColorSliderGrp

columnAttach3(val=True, **kwargs)

Sets the attachment type for all 3 columns. Ignored if there is not exactly 3 columns. Valid values are “left”, “right”, and “both”.

Derived from mel command maya.cmds.attrColorSliderGrp

columnAttach4(val=True, **kwargs)

Sets the attachment type for all 4 columns. Ignored if there is not exactly 4 columns. Valid values are “left”, “right”, and “both”.

Derived from mel command maya.cmds.attrColorSliderGrp

columnAttach5(val=True, **kwargs)

Sets the attachment type for all 5 columns. Ignored if there is not exactly 5 columns. Valid values are “left”, “right”, and “both”.

Derived from mel command maya.cmds.attrColorSliderGrp

columnAttach6(val=True, **kwargs)

Sets the attachment type for all 6 columns. Ignored if there is not exactly 6 columns. Valid values are “left”, “right”, and “both”.

Derived from mel command maya.cmds.attrColorSliderGrp

columnOffset2(val=True, **kwargs)

This flag is used in conjunction with the -columnAttach2 flag. If that flag is not used then this flag will be ignored. It sets the offset for the two columns. The offsets applied are based on the attachments specified with the -columnAttach2 flag. Ignored if there is not exactly two columns.

Derived from mel command maya.cmds.attrColorSliderGrp

columnOffset3(val=True, **kwargs)

This flag is used in conjunction with the -columnAttach3 flag. If that flag is not used then this flag will be ignored. It sets the offset for the three columns. The offsets applied are based on the attachments specified with the -columnAttach3 flag. Ignored if there is not exactly three columns.

Derived from mel command maya.cmds.attrColorSliderGrp

columnOffset4(val=True, **kwargs)

This flag is used in conjunction with the -columnAttach4 flag. If that flag is not used then this flag will be ignored. It sets the offset for the four columns. The offsets applied are based on the attachments specified with the -columnAttach4 flag. Ignored if there is not exactly four columns.

Derived from mel command maya.cmds.attrColorSliderGrp

columnOffset5(val=True, **kwargs)

This flag is used in conjunction with the -columnAttach5 flag. If that flag is not used then this flag will be ignored. It sets the offset for the five columns. The offsets applied are based on the attachments specified with the -columnAttach5 flag. Ignored if there is not exactly five columns.

Derived from mel command maya.cmds.attrColorSliderGrp

columnOffset6(val=True, **kwargs)

This flag is used in conjunction with the -columnAttach6 flag. If that flag is not used then this flag will be ignored. It sets the offset for the six columns. The offsets applied are based on the attachments specified with the -columnAttach6 flag. Ignored if there is not exactly six columns.

Derived from mel command maya.cmds.attrColorSliderGrp

columnWidth(val=True, **kwargs)

Arguments are : column number, column width. Sets the width of the specified column where the first parameter specifies the column (1 based index) and the second parameter specifies the width.

Derived from mel command maya.cmds.attrColorSliderGrp

columnWidth1(val=True, **kwargs)

Sets the width of the first column. Ignored if there is not exactly one column.

Derived from mel command maya.cmds.attrColorSliderGrp

columnWidth2(val=True, **kwargs)

Sets the column widths of both columns. Ignored if there is not exactly two columns.

Derived from mel command maya.cmds.attrColorSliderGrp

columnWidth3(val=True, **kwargs)

Sets the column widths for all 3 columns. Ignored if there is not exactly 3 columns.

Derived from mel command maya.cmds.attrColorSliderGrp

columnWidth4(val=True, **kwargs)

Sets the column widths for all 4 columns. Ignored if there is not exactly 4 columns.

Derived from mel command maya.cmds.attrColorSliderGrp

columnWidth5(val=True, **kwargs)

Sets the column widths for all 5 columns. Ignored if there is not exactly 5 columns.

Derived from mel command maya.cmds.attrColorSliderGrp

columnWidth6(val=True, **kwargs)

Sets the column widths for all 6 columns. Ignored if there is not exactly 6 columns.

Derived from mel command maya.cmds.attrColorSliderGrp

dragCallback(val=True, **kwargs)

Adds a callback that is called when the middle mouse button is pressed. The MEL version of the callback is of the form: global proc string[] callbackName(string $dragControl, int $x, int $y, int $mods) The proc returns a string array that is transferred to the drop site. By convention the first string in the array describes the user settable message type. Controls that are application defined drag sources may ignore the callback. $mods allows testing for the key modifiers CTL and SHIFT. Possible values are 0 == No modifiers, 1 == SHIFT, 2 == CTL, 3 == CTL + SHIFT. In Python, it is similar, but there are two ways to specify the callback. The recommended way is to pass a Python function object as the argument. In that case, the Python callback should have the form: def callbackName( dragControl, x, y, modifiers ): The values of these arguments are the same as those for the MEL version above. The other way to specify the callback in Python is to specify a string to be executed. In that case, the string will have the values substituted into it via the standard Python format operator. The format values are passed in a dictionary with the keys “dragControl”, “x”, “y”, “modifiers”. The “dragControl” value is a string and the other values are integers (eg the callback string could be “print ‘%(dragControl)s %(x)d %(y)d %(modifiers)d’”)

Derived from mel command maya.cmds.attrColorSliderGrp

dropCallback(val=True, **kwargs)

Adds a callback that is called when a drag and drop operation is released above the drop site. The MEL version of the callback is of the form: global proc callbackName(string $dragControl, string $dropControl, string $msgs[], int $x, int $y, int $type) The proc receives a string array that is transferred from the drag source. The first string in the msgs array describes the user defined message type. Controls that are application defined drop sites may ignore the callback. $type can have values of 1 == Move, 2 == Copy, 3 == Link. In Python, it is similar, but there are two ways to specify the callback. The recommended way is to pass a Python function object as the argument. In that case, the Python callback should have the form: def pythonDropTest( dragControl, dropControl, messages, x, y, dragType ): The values of these arguments are the same as those for the MEL version above. The other way to specify the callback in Python is to specify a string to be executed. In that case, the string will have the values substituted into it via the standard Python format operator. The format values are passed in a dictionary with the keys “dragControl”, “dropControl”, “messages”, “x”, “y”, “type”. The “dragControl” value is a string and the other values are integers (eg the callback string could be “print ‘%(dragControl)s %(dropControl)s %(messages)r %(x)d %(y)d %(type)d’”)

Derived from mel command maya.cmds.attrColorSliderGrp

getAnnotation(**kwargs)

Annotate the control with an extra string value.

Derived from mel command maya.cmds.attrColorSliderGrp

getAttrNavDecision(**kwargs)

The first argument is the name of an attribute. The button will be attached to the attribute so the button can be kept in synch with the attribute. The second argument is the navigatorDecisionString that can guide the behaviour that the navigator implements.

Derived from mel command maya.cmds.attrColorSliderGrp

getAttribute(**kwargs)

The name of a unique attribute of type 3double. This newly created field will be attached to the attribute, so that modifications to one will change the other.

Derived from mel command maya.cmds.attrColorSliderGrp

getBackgroundColor(**kwargs)

The background color of the control. The arguments correspond to the red, green, and blue color components. Each component ranges in value from 0.0 to 1.0.When setting backgroundColor, the background is automatically enabled, unless enableBackground is also specified with a false value.

Derived from mel command maya.cmds.attrColorSliderGrp

getDocTag(**kwargs)

Add a documentation flag to the control. The documentation flag has a directory structure like hierarchy. Eg. -dt render/multiLister/createNode/material

Derived from mel command maya.cmds.attrColorSliderGrp

getEnable(**kwargs)

The enable state of the control. By default, this flag is set to true and the control is enabled. Specify false and the control will appear dimmed or greyed-out indicating it is disabled.

Derived from mel command maya.cmds.attrColorSliderGrp

getEnableBackground(**kwargs)

Enables the background color of the control.

Derived from mel command maya.cmds.attrColorSliderGrp

getFullPathName(**kwargs)

Return the full path name of the widget, which includes all the parents

Derived from mel command maya.cmds.attrColorSliderGrp

getHeight(**kwargs)

The height of the control. The control will attempt to be this size if it is not overruled by parent layout conditions.

Derived from mel command maya.cmds.attrColorSliderGrp

getHsvValue(**kwargs)

Specifies the color in hsv style.

Derived from mel command maya.cmds.attrColorSliderGrp

getIsObscured(**kwargs)

Return whether the control can actually be seen by the user. The control will be obscured if its state is invisible, if it is blocked (entirely or partially) by some other control, if it or a parent layout is unmanaged, or if the control’s window is invisible or iconified.

Derived from mel command maya.cmds.attrColorSliderGrp

getLabel(**kwargs)

By default, the label of this field will be the name of the attribute. This flag can be used to override that name with whatever the user wants.

Derived from mel command maya.cmds.attrColorSliderGrp

getManage(**kwargs)

Manage state of the control. An unmanaged control is not visible, nor does it take up any screen real estate. All controls are created managed by default.

Derived from mel command maya.cmds.attrColorSliderGrp

getNumberOfPopupMenus(**kwargs)

Return the number of popup menus attached to this control.

Derived from mel command maya.cmds.attrColorSliderGrp

getPopupMenuArray(**kwargs)

Return the names of all the popup menus attached to this control.

Derived from mel command maya.cmds.attrColorSliderGrp

getPreventOverride(**kwargs)

If true, this flag disallows overriding the control’s attribute via the control’s right mouse button menu.

Derived from mel command maya.cmds.attrColorSliderGrp

getRgbValue(**kwargs)

Specifies the color in rgb style.

Derived from mel command maya.cmds.attrColorSliderGrp

getShowButton(**kwargs)

Control the display of the texture link button. True by default (show it).Flag can appear in Create mode of commandFlag can have multiple arguments, passed either as a tuple or a list.

Derived from mel command maya.cmds.attrColorSliderGrp

getVisible(**kwargs)

The visible state of the control. A control is created visible by default. Note that a control’s actual appearance is also dependent on the visible state of its parent layout(s).

Derived from mel command maya.cmds.attrColorSliderGrp

getVisibleChangeCommand(**kwargs)

Command that gets executed when visible state of the control changes.

Derived from mel command maya.cmds.attrColorSliderGrp

getWidth(**kwargs)

The width of the control. The control will attempt to be this size if it is not overruled by parent layout conditions.

Derived from mel command maya.cmds.attrColorSliderGrp

rowAttach(val=True, **kwargs)

Arguments are : column, attachment type, offset. Possible attachments are: top | bottom | both. Specifies attachment types and offsets for the entire row.

Derived from mel command maya.cmds.attrColorSliderGrp

setAnnotation(val=True, **kwargs)

Annotate the control with an extra string value.

Derived from mel command maya.cmds.attrColorSliderGrp

setAttrNavDecision(val=True, **kwargs)

The first argument is the name of an attribute. The button will be attached to the attribute so the button can be kept in synch with the attribute. The second argument is the navigatorDecisionString that can guide the behaviour that the navigator implements.

Derived from mel command maya.cmds.attrColorSliderGrp

setAttribute(val=True, **kwargs)

The name of a unique attribute of type 3double. This newly created field will be attached to the attribute, so that modifications to one will change the other.

Derived from mel command maya.cmds.attrColorSliderGrp

setBackgroundColor(val=True, **kwargs)

The background color of the control. The arguments correspond to the red, green, and blue color components. Each component ranges in value from 0.0 to 1.0.When setting backgroundColor, the background is automatically enabled, unless enableBackground is also specified with a false value.

Derived from mel command maya.cmds.attrColorSliderGrp

setDocTag(val=True, **kwargs)

Add a documentation flag to the control. The documentation flag has a directory structure like hierarchy. Eg. -dt render/multiLister/createNode/material

Derived from mel command maya.cmds.attrColorSliderGrp

setEnable(val=True, **kwargs)

The enable state of the control. By default, this flag is set to true and the control is enabled. Specify false and the control will appear dimmed or greyed-out indicating it is disabled.

Derived from mel command maya.cmds.attrColorSliderGrp

setEnableBackground(val=True, **kwargs)

Enables the background color of the control.

Derived from mel command maya.cmds.attrColorSliderGrp

setHeight(val=True, **kwargs)

The height of the control. The control will attempt to be this size if it is not overruled by parent layout conditions.

Derived from mel command maya.cmds.attrColorSliderGrp

setHsvValue(val=True, **kwargs)

Specifies the color in hsv style.

Derived from mel command maya.cmds.attrColorSliderGrp

setLabel(val=True, **kwargs)

By default, the label of this field will be the name of the attribute. This flag can be used to override that name with whatever the user wants.

Derived from mel command maya.cmds.attrColorSliderGrp

setManage(val=True, **kwargs)

Manage state of the control. An unmanaged control is not visible, nor does it take up any screen real estate. All controls are created managed by default.

Derived from mel command maya.cmds.attrColorSliderGrp

setPreventOverride(val=True, **kwargs)

If true, this flag disallows overriding the control’s attribute via the control’s right mouse button menu.

Derived from mel command maya.cmds.attrColorSliderGrp

setRgbValue(val=True, **kwargs)

Specifies the color in rgb style.

Derived from mel command maya.cmds.attrColorSliderGrp

setShowButton(val=True, **kwargs)

Control the display of the texture link button. True by default (show it).Flag can appear in Create mode of commandFlag can have multiple arguments, passed either as a tuple or a list.

Derived from mel command maya.cmds.attrColorSliderGrp

setVisible(val=True, **kwargs)

The visible state of the control. A control is created visible by default. Note that a control’s actual appearance is also dependent on the visible state of its parent layout(s).

Derived from mel command maya.cmds.attrColorSliderGrp

setVisibleChangeCommand(val=True, **kwargs)

Command that gets executed when visible state of the control changes.

Derived from mel command maya.cmds.attrColorSliderGrp

setWidth(val=True, **kwargs)

The width of the control. The control will attempt to be this size if it is not overruled by parent layout conditions.

Derived from mel command maya.cmds.attrColorSliderGrp

Previous topic

pymel.core.uitypes.AnimDisplay

Next topic

pymel.core.uitypes.AttrControlGrp

Core

Core Modules

Other Modules

This Page