Go to: Synopsis. Return value. Related. Flags. Python examples.

Synopsis

lattice( selectionList , [after=boolean], [afterReference=boolean], [before=boolean], [commonParent=boolean], [deformerTools=boolean], [divisions=[uint, uint, uint]], [dualBase=boolean], [exclusive=string], [freezeMapping=boolean], [frontOfChain=boolean], [geometry=string], [geometryIndices=boolean], [ignoreSelected=boolean], [latticeReset=boolean], [ldivisions=[uint, uint, uint]], [name=string], [objectCentered=boolean], [outsideFalloffDistance=float], [outsideLattice=uint], [parallel=boolean], [position=[linear, linear, linear]], [prune=boolean], [remove=boolean], [removeTweaks=boolean], [rotation=[angle, angle, angle]], [scale=[linear, linear, linear]], [split=boolean])

Note: Strings representing object names and arguments must be separated by commas. This is not depicted in the synopsis.

lattice is undoable, queryable, and editable.

This command creates a lattice deformer that will deform the selected objects. If the object centered flag is used, the initial lattice will fit around the selected objects. The lattice will be selected when the command is completed. The lattice deformer has an associated base lattice. Only objects which are contained by the base lattice will be deformed by the lattice.

Return value

string[]Ffd node name, lattice name, base lattice name.

In query mode, return type is based on queried flag.

Related

cluster, deformer, flexor, percent, sculpt, wire, wrinkle

Flags

after, afterReference, before, commonParent, deformerTools, divisions, dualBase, exclusive, freezeMapping, frontOfChain, geometry, geometryIndices, ignoreSelected, latticeReset, ldivisions, name, objectCentered, outsideFalloffDistance, outsideLattice, parallel, position, prune, remove, removeTweaks, rotation, scale, split
Long name (short name) Argument types Properties
name(n) string create
Used to specify the name of the node being created
geometry(g) string queryeditmultiuse
The specified object will be added to the list of objects being deformed by this deformer object, unless the -rm flag is also specified. When queried, this flag returns string string string ...
geometryIndices(gi) boolean query
Complements the -geometry flag in query mode. Returns the multi index of each geometry.
remove(rm) boolean editmultiuse
Specifies that objects listed after the -g flag should be removed from this deformer.
before(bf) boolean createedit
If the default behavior for insertion/appending into/onto the existing chain is not what you want then you can use this flag to force the command to stick the deformer node before the selected node in the chain even if a new geometry shape has to be created in order to do so. Works in create mode (and edit mode if the deformer has no geometry added yet).
after(af) boolean createedit
If the default behavior for insertion/appending into/onto the existing chain is not what you want then you can use this flag to force the command to stick the deformer node after the selected node in the chain even if a new geometry shape has to be created in order to do so. Works in create mode (and edit mode if the deformer has no geometry added yet).
afterReference(ar) boolean createedit
The -afterReference flag is used to specify deformer ordering in a hybrid way that choses between -before and -after automatically. If the geometry being deformed is referenced then -after mode is used in adding the new deformer otherwise -before mode is used. The net effect when using -afterReference to build deformer chains is that internal shape nodes in the deformer chain will only appear at reference file boundaries, leading to lightweight deformer networks that may be more amicable to reference swapping.
split(sp) boolean createedit
Branches off a new chain in the dependency graph instead of inserting/appending the deformer into/onto an existing chain. Works in create mode (and edit mode if the deformer has no geometry added yet).
frontOfChain(foc) boolean createedit
This command is used to specify that the new deformer node should be placed ahead (upstream) of existing deformer and skin nodes in the shape's history (but not ahead of existing tweak nodes). The input to the deformer will be the upstream shape rather than the visible downstream shape, so the behavior of this flag is the most intuitive if the downstream deformers are in their reset (hasNoEffect) position when the new deformer is added. Works in create mode (and edit mode if the deformer has no geometry added yet).
parallel(par) boolean createedit
Inserts the new deformer in a parallel chain to any existing deformers in the history of the object. A blendShape is inserted to blend the parallel results together. Works in create mode (and edit mode if the deformer has no geometry added yet).
ignoreSelected(ignoreSelected) boolean create
Tells the command to not deform objects on the current selection list
deformerTools(dt) boolean query
Returns the name of the deformer tool objects (if any) as string string ...
prune(pr) boolean edit
Removes any points not being deformed by the deformer in its current configuration from the deformer set.
exclusive(ex) string createquery
Puts the deformation set in a deform partition.
divisions(dv) [uint, uint, uint] createqueryedit
Set the number of lattice slices in x, y, z. Default is 2, 5, 2. When queried, this flag returns float float float. When you change the number of divisions, any tweaking or animation of lattice points must be redone.
ldivisions(ldv) [uint, uint, uint] createqueryedit
Set the number of local lattice slices in x, y, z.
objectCentered(oc) boolean create
Centers the lattice around the selected object(s) or components. Default is off which centers the lattice at the origin.
outsideLattice(ol) uint create
Set the mode describing how points outside the base lattice are transformed. 0 (the default) specifies that no outside points are transformed. 1 specifies that all outside points are transformed, and 2 specifies that only those outside points which fall within the "falloff distance" (see the -ofd/outsideFalloffDistance flag) are transformed. When querying, the current setting for the lattice is returned.
outsideFalloffDistance(ofd) float create
Set the falloff distance used when the setting for transforming points outside of the base lattice is set to 2. The distance value is a positive number which specifies the size of the falloff distance as a multiple of the base lattice size, thus a value of 1.0 specifies that only points up to the base lattice width/height/depth away are transformed. A value of 0.0 is equivalent to an outsideLattice value of 0 (i.e. no points outside the base lattice are transformed). A huge value is equivalent to transforming an outsideLattice value of 1 (i.e. all points are transformed).
latticeReset(lr) boolean edit
Reset the lattice to match its base position. This will undo any deformations that the lattice is causing. The lattice will only deform points that are enclosed within the lattice's reset (base) position.
removeTweaks(rt) boolean edit
Remove any lattice deformations caused by moving lattice points. Translations/rotations and scales on the lattice itself are not removed.
freezeMapping(fm) boolean createqueryedit
The base position of the geometries points is fixed at the time this flag is set. When mapping is frozen, moving the geometry with respect to the lattice will not cause the deformation to be recomputed.
commonParent(cp) boolean create
Group the base lattice and the deformed lattice under a common transform. This means that you can resize the lattice without affecting the deformation by resizing the common transform.
position(pos) [linear, linear, linear] create
Used to specify the position of the newly created lattice.
rotation(ro) [angle, angle, angle] create
Used to specify the initial rotation of the newly created lattice.
scale(s) [linear, linear, linear] create
Used to specify the initial scale of the newly created lattice.
dualBase(db) boolean create
Create a special purpose ffd deformer node which accepts 2 base lattices. The default is off which results in the creation of a normal ffd deformer node. Intended for internal usage only.

Flag can appear in Create mode of command Flag can appear in Edit mode of command
Flag can appear in Query mode of command Flag can have multiple arguments, passed either as a tuple or a list.

Python examples

import maya.cmds as cmds

# to create a 4x5x4 lattice centered around the sphere
#
cmds.sphere();
cmds.lattice( dv=(4, 5, 4), oc=True )
# to edit the lattice divisions to be 6x6x6
#
cmds.lattice( 'ffd1', e=True, dv=(6, 6, 6) )
# move a point on the lattice
cmds.select('ffd1Lattice.pt[2][2][5]',r=True)
cmds.move(0,0,3,r=True)
# to reset the lattice
#
cmds.lattice( 'ffd1', e=True, lr=True )